VividRacing.com VR Store VR Service Vivid Racing Automotive Lifestyle and Vehicle Forums Vivid Racing Blog News VR Media Contact
Greddy High Quality Performance Parts

Author Archive



KW Suspension for New Makes and Models

Publishsed by Cole Kelly on October 29th, 2009 | Posted in Product Info | No Comments »

When looking for the blend of comfort and performance, KW Suspension is Vivid Racing’s choice for most make and models. Among their best coilovers are the KW Variant 3’s that allow the driver to create a customized suspension feel and adjust the ride height. The ease of change also allows for a street setting to be used for daily driving and then an adjustment can provide your car the stiff performance needed on the track.

New to the KW Suspension catalog is the 2010 Chevrolet Camaro Variant 3 coilover. With the Camaro being a retro styled car and encompassing new technology throughout, KW Suspension set out to improve the ride and handling of this hot selling muscle car. With the same state-of-the-art technology found in the V3 coilovers for every other make and model, KW was able to fine tune the Camaro’s handling and lower the car to improve the style.

Also added to the list of cars is the Nissan 370Z. V3 coilovers could make the otherwise stock 370Z to be ready for the track because of the separate and independent compression and rebound damping options.

You can see all of the KW Suspension line here.



Honda Civic Si on the Track with Help from Vivid Racing

Publishsed by Cole Kelly on October 22nd, 2009 | Posted in Client Cars | No Comments »

A customer of ours sent in photos of his 2008 Honda Civic SI with a variety of mods. Under the hood you will find an Injen Cold Air Intake, Skunk2 Mega Power R 70mm Exhaust, Strup Race Header, Strup Angled Defouler and tunned with a Cobb AcessPort.

One of the most over looked and most beneficial aspects of preparing a car are the brakes, wheels and tires. This customer has it all figured out with Hawk Pads, Rotora Slotted and Cross Drilled Rotors and Konig Daylite 17″ wheels wrapped in a 225/45/17 Yokohama’s S Drive rubber. Now power is to the ground and able to be stopped properly. The last step in a build is appearance. A HFP front lip for style and performance finished off with factory tint to keep you cool in the Arizona heat.

No matter you car, Vivid Racing has a solution for you. Check our online catalog here of give us a call at 1-866-44-VIVID



Ferrari 355 Berlinetta Running Like New

Publishsed by Cole Kelly on October 21st, 2009 | Posted in Tuning & Tech | No Comments »

As mentioned in a previous blog by us, Vivid Racing received a Ferrari 355 Berlinetta to perform a required 2 year maintenance. After replacing the cam belts, timing belts, head gaskets and a water pump, Vivid Racing added a performance exhaust by Tubi. The Tubi exhaust allows better flow and reduced restriction that in turn, gives this 355 a wicked growl and performance. The last step of this 355 is a K40 Radar detector to help keep the owner ticket free.

You can check out all of Vivid Racings performance parts and gadgets for your Ferrari here.

Ferrari 355 Berlinetta
Ferrari 355 Berlinetta
Ferrari 355 Berlinetta
Ferrari 355 Berlinetta
Ferrari 355 Berlinetta

MSR-200 Motorsports Camera Ready for You!

Publishsed by Cole Kelly on October 20th, 2009 | Posted in Product Info | No Comments »

720p Resolution, weather proof construction and a price point that is hard to beat, the MSR-200 by Hoyt technologies could be the go to camera for everyone with the desire to record. Small, compact and packed with features is about all you can ask for. Vivid Racing has been using a Hoyt camera for a while to capture our track events and even video new products.

Perfect for bikes, cars or anything else your creative mind can work up, the MSR-200 will let you be on your way recording and uploading in no time.

Check out the entire Video Recording line here – http://www.vividracing.com/catalog/12-volt-car-audio-video-recording-c-5368_5311.html



Project CLS55 Rocks the Dyno

Publishsed by Cole Kelly on October 14th, 2009 | Posted in Project Cars | No Comments »

Vivid Racing took delivery of its newest project car a few weeks back. With the intention of keeping this a mild build, an exhaust, HRE wheels and the existing Renntech Stage 5 kit is pretty much all that is in store… for now.

The exhaust selected is the Meisterschaft GT Racing. With more performance and a nice throaty sound, the Mesisterschaft keeps with the Mercedes look with polished stainless tips.

The existing Renntech Stage 5 kit included an ECU tune, headers, pulley, 78mm throttle body and a carbon fiber airbox. With this kit and the new exhaust, Vivid Racing was anxious to dyno the luxury neck breaker. The final number put down on our dyno is an amazing 446 horsepower and 491 ft. lbs of torque. All this while riding in comfort.

For those ready to sport a new performance level in your own CLS, check out our online catalog here – http://www.vividracing.com/catalog/index.php?class_9=5387&my_type_id=8&class_8=37




Site Map | Services | International | Advertise | Affiliate Program | Contact Us Copyright © 2009 Vivid Distributing LLC Powered By The Rohnstein