If you have been following our Project Cars, then you have seen the Project 135I we started in January.  Now that our 997TT is done, you are about to see this thing totally transform.  We are in the process of working on ALOT of updates including turbo modification, exterior, and more.  Today we finished our first article of the midpipe to go with our muffler.  This complete catback will feature our stainless steel muffler with titanium tips, a center pipe with muffler delete and high flow resonators, and a tuned sound that makes your BMW 1 Series that much more exotic.  The complete exhaust system by Agency Power should be available in 3-4 weeks, so check back with us.  In the meantime, view this quick YouTube Video we shot.

You can view all our BMW Performance Parts Here.

You are gonna see alot more from this company, 3D Design, on our website and with our Project 135I as we add their front lip and rear diffuser to the car.  3D Design has some pretty fresh kits for the new E92 and E90 BMW M3.  Other kits from the 5 series and E46 M3 are available too.  Of course, my heart lies with the E82 parts.  Check out this customers car who put the 3D Design front lip spoiler on his 135I and the BMW Performance side skirts.

Found these pics of a customers BMW 135I looking pretty hot!  This car has the Seibon Carbon Fiber GTR hood we sell and the customer has painted all except for the vents.  I am really digging it and gonna paint my hood now just like this, but of course, black not white  I love see customers rides, very inspirational!

View our BMW 135I Body Kits and Racing Parts Here.

We just did a new dyno with the current mods on the car to see how it reacted. It is very nice outside with an ambient temperature of about 80F. The car is running Agency Power Catless Downpipes, Agency Power Exhaust with Ti Tips, Agency Power Intercooler, JB3 ECU, Riss Racing Intake. We run a Mustang Dyno which reads a bit lower then some of the DynoJets runs out there. We were running pump gas of 91 octane. The made an impressive 322 rwhp and 375 ft/lbs of torque. Once we remove the center pipe and run race gas, I bet we see 350 wheel horsepower. More info coming up!

View our N54 Turbo BMW 135I, 335I, and 535I Performance Parts Here.

Took our Project 135I out to the drags on Friday night for some fun.  And why not!  Only 100F outside in the Arizona desert, alittle sweat and poor running turbos is always neat.  Along with our buddy in his Nissan R34 GTR, we made quite the show.  The little steptronic 135I equipped with a JB3 ECU update, Riss Racing Intake, Code3 Intercooler, and Agency Power Exhaust put down a 13.3 second 1/4 mile run with a trap speed of 106mph.  To show how hot it was, the GTR with 600 HP ran a 12.6.  Both of these on pump gas of course.  One of the guys at the track took this awesome picture of us at the start line.  Enjoy!

Check out all our BMW Performance Racing Parts Here.