Believe us when we say this will not be the last set of wheels on our EVO X! But for now, we pulled from our huge Volk and Advan inventory these 18×9 Advan RS in Gunmetal. With a 29mm offset, the multispoke wheels give the EVO X red a good contrast. Thanks to Toyo Tires, we have the all new Toyo R1R tires in a 255/35/18. These are a pretty aggressive street tire and we look forward to running them down! We also took some Red Lug Nuts from the shelf for that full look. The stock wheels and tires weighed about 49lbs where these Advan and Toyo combo weighed in at 44lbs.

We also tested fitted our 18×8.5 Agency Power wheels which fit perfect and test fitted a stock EVO IX MR wheel in 17×8 which was a NO GO.

I think a nice set of 19×10 need to come next with some suspension! Or do we have some suspension already????

Full gallery is here – http://www.vividracing.com/forums/ga…ages.php?c=308

View our complete wheel store online here – http://www.vividracing.com/catalog/w…es-c-4542.html

We finished the prototype components for the EVO X intake system. This includes the suction pipe to the turbo and short ram intake kit with heat shield that connects to the factory air scoop.

The car did really well actually with the complete intake kit and suction pipe. The car by nature from the factory ran quite rich. With the addition of the intake components, it leaned the car out to a safe tunable AFR which gave it a ton of power. The boost was consistant but heavily drops off. We definitely need to get a boost controller and/or have some ECU tuning done. We suspect that with the intake and a good turbo back exhaust (coming soon) the car will pick up about 40HP easily.

Final testing will be done on the intake kit which will be sold as just the short ram or just the suction pipe. You will be able to get it at a combination as well. We hope to start production by Monday and have product shippable within 2 weeks.

Here is the dyno sheet from the run. Stay tuned!

Gallery is here – http://www.vividracing.com/forums/ga…ages.php?c=307

Not stopping with our all new EVO X, we have begun development of our new Suction Pipe Kit, Cold Air Intake, and Top Intercooler Pipe Kit from Agency Power. We are showcasing our prototyping process of these parts. We plan on doing dyno tests on each part within the next 48 hours. We expect some good gains because of the restriction in both parts.

Production pieces will begin immediately after the testing is completed. Expect these parts to be available in a show finish!

Check out our gallery here -
http://www.vividracing.com/forums/ga…?c=307&userid=

Check out the sound clip of the Agency Power Blow Off Valve on the EVO X -

You can buy online here – http://www.vividracing.com/catalog/a…8-p-46202.html

Our goal is to have 5 products on the EVO X by Monday! 1 weekend to be ahead of the game .

So we have added our Agency Power Shorty Fin Antenna and an Agency Power Adjustable Blow Off Valve.

We even dynoed the car with the BOV and it held boost well. The biggest issue with the car is the programming. Running the BOV 50/50 it gives the car that great whoooosh sound.

Check out the products here -
Antenna – http://www.vividracing.com/catalog/a…8-p-46204.html
Blow Off Valve – http://www.vividracing.com/catalog/a…8-p-46202.html