VividRacing.com » exhaust

Agency Power BMW 135I Catback Exhaust Video

Dan — Wed, 11 Nov 2009 00:07:37 +0000

If you have been following our Project Cars, then you have seen the Project 135I we started in January. Now that our 997TT is done, you are about to see this thing totally transform. We are in the process of working on ALOT of updates including turbo modification, exterior, and more. Today we finished our first article of the midpipe to go with our muffler. This complete catback will feature our stainless steel muffler with titanium tips, a center pipe with muffler delete and high flow resonators, and a tuned sound that makes your BMW 1 Series that much more exotic. The complete exhaust system by Agency Power should be available in 3-4 weeks, so check back with us. In the meantime, view this quick YouTube Video we shot.

You can view all our BMW Performance Parts Here.

Another Ferrari F355 Equipped by Vivid Racing – Feelin Ole Skool!

Dan — Fri, 23 Oct 2009 18:45:13 +0000

I am loving these Ferrari 355’s! This customer got hooked up from Vivid Racing by adding a Tubi Style F1 Exhaust and Tubi Style thermal insulated headers. Besides being yellow, convertible, and sexy, this customer has also added a Ferrari Challenge grill kit. The Tubi Style exhaust system are Italian made featuring stainless steel construction and very fine welds. The quality of the product along with the engineering makes the Tubi Style exhaust systems some of the best looking and sounding in the industry. View all our Tubi Style Exhaust Systems Here.

Honda Civic Si on the Track with Help from Vivid Racing

Cole Kelly — Thu, 22 Oct 2009 23:44:59 +0000

A customer of ours sent in photos of his 2008 Honda Civic SI with a variety of mods. Under the hood you will find an Injen Cold Air Intake, Skunk2 Mega Power R 70mm Exhaust, Strup Race Header, Strup Angled Defouler and tunned with a Cobb AcessPort.

One of the most over looked and most beneficial aspects of preparing a car are the brakes, wheels and tires. This customer has it all figured out with Hawk Pads, Rotora Slotted and Cross Drilled Rotors and Konig Daylite 17″ wheels wrapped in a 225/45/17 Yokohama’s S Drive rubber. Now power is to the ground and able to be stopped properly. The last step in a build is appearance. A HFP front lip for style and performance finished off with factory tint to keep you cool in the Arizona heat.

No matter you car, Vivid Racing has a solution for you. Check our online catalog here of give us a call at 1-866-44-VIVID

New Dyno Run Update on Project BMW 135I

Dan — Thu, 22 Oct 2009 23:27:24 +0000

We just did a new dyno with the current mods on the car to see how it reacted. It is very nice outside with an ambient temperature of about 80F. The car is running Agency Power Catless Downpipes, Agency Power Exhaust with Ti Tips, Agency Power Intercooler, JB3 ECU, Riss Racing Intake. We run a Mustang Dyno which reads a bit lower then some of the DynoJets runs out there. We were running pump gas of 91 octane. The made an impressive 322 rwhp and 375 ft/lbs of torque. Once we remove the center pipe and run race gas, I bet we see 350 wheel horsepower. More info coming up!

View our N54 Turbo BMW 135I, 335I, and 535I Performance Parts Here.

997 Turbo Tiptronic Rocks the Strip with a 11.16 1/4mile

Dan — Thu, 22 Oct 2009 16:04:09 +0000

Just wanted to say nice work to our customer Tim who rocked the dragstrip with his 997 Turbo Tiptronic. His mods are a Softronic ECU Flash, Ceramic Coated Headers, and Fabspeed Bypass Pipes. This was his first time out with the car since it was flashed. The tiptronic allowed him to rocket to a 11.16sec in the 1/4mile with a trap of 123mph. Just shows how quick a tip is.

And the play by play…

Tim is at the line

The tree goes

Brake boost and launch

Happy Guy!