APR Tuned Stage III Power Upgrade Audi A4 B5 1.8T 5spd 00-01

APR Stage III is APR's cutting-edge turbo upgrade for your A4 1.8T. At APR, they have worked long and hard to bring you the finest 1.8T upgrade available. Kits are made with the best materials and engineering available, from the exhaust manifold to the hose clamps. This APR Stage III is offered in a 280hp version. The Stage III kit consists of the following components:
- APR Investment Cast Inconel Exhaust Manifold
- Garrett/Allied Signal Ballistic Series Ball-Bearing Turbocharger
- APR High Flow Catalytic Converter
- APR Custom Cast Urethane and Silicone Intake Hoses
- APR High Flow Fuel Injectors
- All Associate Plumbing and Hardware

The most important part of the Stage III kit is the exhaust manifold. APR has spent enormous time and resources developing the turbo manifold. The exhaust manifold has been designed in Pro/Engineer 20, a 3-D modeling package and validated extensively on the computer using Exa Powerflow, a CFD analysis program. By performing a computational fluid dynamics analysis, they were able to study exhaust flow, pressure drops, and fluid flow through the exhaust manifold. Multiple computer simulations were done to prove the design before APR even had a physical manifold in their hand.

Once the manifold was fully passed on the computer APR had the exhaust manifold CAD file transferred to a rapid prototyping machine. A polycarbonate exhaust manifold was cast from the prototyping machine. With this plastic manifold they were able to mock everything up in the test vehicle before proceeding to the next process.

From the polycarbonate piece APR was able to cast a metal piece for prototyping. The metal used for the prototype and the production manifold is Inconel 625. Inconel is a very high quality (yet expensive and difficult to machine) metal that is used extensively in the racing and aeronautical industry (Audi Sport sells an Inconel exhaust manifold for $10,000). Inconel has excellent heat retention characteristics that work to enhance turbo response by keeping exhaust velocities high. APR guarantees that this manifold will never crack. Furthermore, the production manifold is cast using a lost-wax process versus a traditional sand-casting process. This process is more expensive but gives a much higher quality part with better tolerances, no parting lines, and a smoother surface finish (the internal surfaces feel like they have been Extrude Honed).

The exhaust manifold is mated to a Garrett turbocharger that replaces the stock Triple K K03 turbocharger. APR chose to use a Garrett turbocharger in lieu of a Triple K unit for several reasons. First of all, the new Garrett GT-Series is a more efficient design than the old Triple K K-24 turbocharger used by competitors (the K-24's design dates back to the mid 70's). The Garrett turbocharger APR has selected is a 1990's design. Also, Garrett turbochargers are available in a wider variety of configurations than the Triple K line, which allowed them to find a more exact match. The stock injectors are maxed out at power levels much over 220HP and consequently the fuel injectors have been replaced by larger units. Dialing in the injectors required many hours on the chassis dynamometer to achieve the proper fuel mixture throughout the entire rpm range.