Exedy Hyper Single Clutch Kit Ford Mustang 8 Crank (26T) 96-04

All Hyper Clutches come with a steel flywheel and a 6-puck disc with cerametallic facing, and a spring center damper. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and generally higher than other single plate clutches.

Specs
Number of Discs: SINGLE
Push / Pull : PUSH
Clamp Load (Lbs): 3600
Disc Outer Diameter: 250
Spline Teeth / Major Diameter: 26T / 29

Fits: Mustang 8 Bolt Crank, TREMAC TRANS 96-04

Picture is for representation only. Actual product may vary.

About Manufacturer: Exedy
Exedy Corporation is based out of Japan and it's main focus is aftermarket and OEM clutch kits. Most well known in the tuner industry for their high performance clutch products, Exedy has several different kits available for street or race cars. Their highest line kit is a triple plate carbon fiber disk clutch kit, while the most popular unit is their Twin Plate kit with Flywheel. These kits are generally for high performance street or race cars with horsepower exceeding 500whp. Exedy also manufactures great OEM replacement clutch kits for your average street vehicle.