Save up to 40% on VR Forged wheel sets! - Shop Now
Tax Season - Exhaust '24
  See more parts for your Chevrolet Silverado 2500

Fabtech 8" Performance System w/ Performance Shocks GM C/K2500Hd | C/K3500 Non Dullay 2007-2008

$4,349.07 SALE: $3,914.14

Fabtech

Model #K1030


Shopper Award

The 8'' Performance Suspension System is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4'' thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtech's combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37'' tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtech's optional front dual shock hoop system. The front suspension is completed with an differential skit plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4'' block kit with 2'' add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket.

8" PERF SYS W/PERF SHKS 07-08 GM C/K2500HD,C/K3500 NON DUALLY

Features

  • California Proposition 65: WARNING: Cancer & Reproductive Harm and image
  • Title: Fabtech 8" PERF SYS W/PERF SHKS 07-08 GM C/K2500HD,C/K3500 NON DUALLY
  • TIRE SIZE - 37/12.50R17 WHEEL - 17X9 W/4 5/8" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/5" BS W/MINOR TRIMMING; TIRE SIZE - 37/14.00R18 WHEEL - 18X9 W/5" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 10. REQUIRES WELDING, EXHAUST, AND POSSIBLE FRONT DRIVE SHAFT MODS.; 12. DOES NOT FIT MODELS WITH QUADRASTEER.; 14. CAN NOT USE OEM WHEEL AND TIRE.; 15. WILL EXPERIENCE SOME LOSS OF TURNING RADIUS.; 21. FRONT DRIVESHAFT MODIFICATION REQUIRED OR ORDER CV DRIVESHAFT (FTS91004)

Notes:

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2007-2008
Chevrolet Silverado 2500 HD
LT
2007-2008
Chevrolet Silverado 2500 HD
LT
  • NON DUALLY
2007-2008
Chevrolet Silverado 2500 HD
LTZ
2007-2008
Chevrolet Silverado 2500 HD
LTZ
  • NON DUALLY
2007-2008
Chevrolet Silverado 2500 HD
WT
2007-2008
Chevrolet Silverado 2500 HD
WT
  • NON DUALLY
2007-2008
Chevrolet Silverado 3500 HD
LT
2007-2008
Chevrolet Silverado 3500 HD
LT
  • NON DUALLY
2007-2008
Chevrolet Silverado 3500 HD
LTZ
2007-2008
Chevrolet Silverado 3500 HD
LTZ
  • NON DUALLY
2007-2008
Chevrolet Silverado 3500 HD
WT
2007-2008
Chevrolet Silverado 3500 HD
WT
  • NON DUALLY
2007-2008
GMC Sierra 2500 HD
SLE
2007-2008
GMC Sierra 2500 HD
SLE
  • NON DUALLY
2007-2008
GMC Sierra 2500 HD
SLT
2007-2008
GMC Sierra 2500 HD
SLT
  • NON DUALLY
2007-2008
GMC Sierra 2500 HD
WT
2007-2008
GMC Sierra 2500 HD
WT
  • NON DUALLY
2007-2008
GMC Sierra 3500 HD
SLE
2007-2008
GMC Sierra 3500 HD
SLE
  • NON DUALLY
2007-2008
GMC Sierra 3500 HD
SLT
2007-2008
GMC Sierra 3500 HD
SLT
  • NON DUALLY
2007-2008
GMC Sierra 3500 HD
WT
2007-2008
GMC Sierra 3500 HD
WT
  • NON DUALLY

Who is Fabtech?

Fabtech is an aftermarket automotive company that specializes in creating suspension parts for various pick-up trucks, SUVs, and other offroad vehicles. They have been doing the business for more than 20 years and have consistently provided their customer products that are top-notched and have garnered multiple awards for its innovative design. Today, they have established their brand as one of the leading companies in the market.

Advanced Manufacturing Facility

The company uses advanced technology to its advantage in creating its products. By utilizing the most high-tech software available, they are able to create designs that are on the cutting edge. All their works and manufacturing processes are done in house using their 100,000 sq feet facility. It houses multiple laser cutters, forming equipment, CNC machines, robotic welders not to mention the leading skilled welders and engineers that help the company create a consistent product that has the same high quality expected from them.

Fabtech creates their product to be easy to install and should provide a trouble-free experience to all their clients. Their product comes with all the necessary hardware needed and is a direct fit to the original parts’ location.

All their products have been tried and tested rigorously to make sure that it passes the high-quality standard the company has imposed on itself. This allows their customers to have a product that is superior to its competitors and functions the way it’s supposed to do.

Purchase Fabtech Products at Vivid Racing

If you want a suspension to upgrade for your vehicle that would be able to improve the way your car look and perform, then Fabtech is the brand for you. They offer products for different vehicles makes such as the ones from Toyota, GM, Ford, Nissan, Chevy and Jeep to name a few. Visit Vivid Racing and check out the list of their products that would fit your specific vehicle.

The Limited Lifetime Warranty excludes the following Fabtech items; bushings, bump stops, ball joints, uniballs, tie rod ends, limiting straps, cross shafts, heim joints and driveshafts. These parts are subject to wear and are not considered defective when worn. They are warranted for 60 days from the date of purchase for defects in workmanship.

Dirt Logic and Performance Coilover take apart shocks are considered a serviceable shock with a one year warranty on leakage only. Service seal kits are available separately for future maintenance. All other shocks are covered under our Limited Lifetime Warranty.

Fabtech does not warrant any product for finish, alterations, modifications and/or installation contrary to Fabtech's instructions. Alterations to the finish of the parts including but not limited to painting, powder coating, plating and/or welding will void all warranties. Some finish damage may occur to parts during shipping, which is considered normal and is not covered under warranty.

Fabtech products are not designed nor intended to be installed on vehicles used in race applications or for racing purposes or for similar activities. (A "RACE" is defined as any contest between two or more vehicles, or any contest of one or more vehicle against the clock, whether or not such contest is for a prize). This warranty does not include coverage for police or taxi vehicles, race vehicles, or vehicles used for government or commercial purposes. Also excluded from this warranty are sales outside of the United States of America.

Installation of most suspension products will raise the center of gravity of the vehicle and will cause the vehicle to handle differently than stock. It may increase the vehicle's susceptibility to a rollover, on road and off road, at all speeds. Extreme care should be taken to operate the vehicle safely at all times to prevent rollover or loss of control resulting in serious injury or death. Fabtech front end Desert Guards may impair the deployment or operation of vehicles equipped with supplemental restraining systems/air bag systems and should not be installed if the vehicle is equipped as so.

Fabtech makes every effort to ensure suspension product compatibility with all vehicles listed on the website, but due to unknown auto manufacturer's production changes and/or inconstancies by the auto manufacturer, Fabtech cannot be responsible for 100% compatibility, including the fitment of tire and wheel sizes listed. The Tire and Wheel sizes listed in Fabtech's website are only a guideline for street driving with noted fender trimming. Fabtech is not responsible for damages to the vehicle's body or tires. Fabtech is not responsible for premature wear of factory components due to the installation of oversized tires and wheels.

Fabtech's obligation under this warranty is limited to the repair or replacement, at Fabtech option, of the defective product only. All costs of removal, installation or re-installation, freight charges, incidental or consequential damages are expressly excluded from this warranty. Fabtech is not responsible for damages and/or warranty of other vehicle parts related or non related to the installed Fabtech product. This warranty is expressly in lieu of all other warranties expressed or implied. This warranty shall not apply to any product that has been subject to accident, negligence, alteration, abuse or misuse as determined by Fabtech.

Fabtech suspension components must be installed as a complete system including shocks as shown on our website. All warranties will become void if Fabtech parts are combined and/or substituted with other aftermarket suspension products. Combination and/or substitution of other aftermarket suspension parts may cause premature wear and/or product failure resulting in an accident causing injury or death. Fabtech does not warrant products not manufactured by Fabtech.

Depending on the condition of the factory suspension components retained after the installation of a Fabtech suspension not all vehicles may have the same ride stance front to rear as described in the website. The blue color of suspension components shown in all Fabtech photographs are for display purposes only. Majority of all Fabtech components will be black specifically where noted with part numbers ending in BK.

Installation of Fabtech product may void the vehicles factory warranty; it is the consumer's responsibility to check with their local vehicle's dealer for warranty disposition before the installation of the product. Some state laws may prohibit modification of suspension to a vehicle in whole or in part. It is the responsibility of the installer and consumer to consult local laws prior to the installation of any Fabtech suspension product to comply with such written laws.

It is the responsibility of the distributor and/or the retailer to review all warranties and warnings of Fabtech products with the consumer prior to purchase.

Fabtech reserves the right to super cede, discontinue, change the design, finish, part number and/or application of parts when deemed necessary without written notice. Fabtech is not responsible for misprints or typographical errors within the website or price sheet.

Check out these other great products