Just bought the Softronic ECU Flash for your Porsche? Once you receive the Client Cable from us, here is what you do next! You must have a Windows laptop with a wireless internet connection to complete this. The car must be able to be turned to the on position without starting it. Once connected, the stock ECU file will be pulled from your vehicle and sent to the Softronic servers. Once they receive it, they will alter the factory file and email it back to you to be uploaded. Please download and install the ZIP file below. Once it has downloaded click on the "Setup" file in the folder, not the one that has "Flash Client Setup". Black OBD Flash Cable - http://softronic.us/flashersetup.zip
You MUST enter your Name, Email Address, Vehicle Model, Year, and Transmission Type in the Comments Box. 1. Plug in the cable to the USB and let the computer install it automatically. Should it ask then say yes and proceed. 2. Plug the cable into the OBD2 port or also known as the diagnostic port. 3. Turn on the key. 4. Launch the software and after it reads when you get to the "Comments " fill in if you want Sport mode, what year, model and trans you cars has, manual or auto. 5. The file will then upload. 6. Softronic can then can send you a file back. 7. If you incur any issues, please contact Vivid Racing for Support. Click Any Image for FULL SCREEN 
|
