ProCharger High Output Intercooled Supercharger System Chevrolet Silverado 1500 5.3L & 6.0L 03-06

Horse Power Gains of 60-65% for 5.3L and 55-60% for 6.0L

Intercooled ProCharger systems deliver the ultimate performance and power increase for towing, daily driving and sport truck applications. Compared to all bolt-on aftermarket superchargers, ATI's superior technology delivers more low-end torque and substantially more total power than any other supercharger system. In the lower rpm towing range, Intercooled ProCharger systems will deliver more rear-wheel torque because the intercooled charge air is extremely dense (virtually at ambient temperature), the engine is running full timing, and the P-1SC consumes far less power than positive displacement superchargers. At mid-range and higher rpm, in addition to making more power per pound of boost (due to the same combination of greater air density, full timing and less parasitic load), an Intercooled ProCharger system is also able to safely produce more total boost, thanks to the coolest charge air and exhaust gas temperatures in the industry. The net effect is a substantially larger increase in air density, which in turn produces a substantially larger increase in power. History and physics show that applications without intercooling must run unsafe boost levels or octane-boosted fuel to perform even close to an Intercooled ProCharger system.

Superior Efficiency and Fuel Economy: Intercooled ProCharger supercharger systems enable your truck or sport utility to deliver unparalleled performance without sacrificing daily drivability or gas mileage. In fact, unlike inefficient positive displacement superchargers, in most towing applications your gas mileage may actually increase slightly thanks to the superior efficiency of the P-1SC ProCharger. Stock or modified, for towing, daily driving, or racing, Intercooled ProCharger systems deliver far more performance with far greater engine reliability than any other supercharger system or power adder such as nitrous oxide.

The Best Engine Reliability and Drivability: ATI introduced the industry's first intercooled supercharger system nearly 3 years before its nearest competitor, and is the only company that offers air-to-air intercooled supercharger systems for trucks and SUV's. Other companies' non-intercooled and air-to water supercharger systems are typically tuned at the edge of detonation, which leaves you little margin for error. However, because air-to air intercooling removes the heat which causes detonation, you can safely run far more engine-friendly intercooled boost with full timing and complete peace of mind. With air-to-air intercooling, there is no need for "band aids" such as ignition retard, over-rich or auxiliary fuel injectors, or water injection. There is also no need to buy exhaust gas temperature (EGT) gauges because intercooling means that exhaust and overall engine temperatures remain stable even during extreme towing, racing and/or summer heat conditions. The intercooler system, which is standard equipment, simply rejects far more heat than it will receive from the highly efficient P-1SC ProCharger. Intercooling is clearly the fundamental solution for reliable high performance, because it substantially improves both engine reliability and power output. That is why intercooled forced induction is the high performance technology of choice for millions of factory OEM vehicles worldwide.

P-1SC Supercharger Specs:
- Volute Diameter: 9"
- Max Supercharged HP: 825
- Base HP Range of Motor (Naturally Aspirated): 200-500
- Max Flow (cfm): 1200
- Max boost (psi): 30
- Inlet Hose Diameter: 3.75"
- Inducer Diameter: 3.37"
- Exducer Diameter: 6.25"
- Outlet Hose Diameter:3"
- Outlet I.D.: 2.62"
- Max Impeller RPM: 62,000
- Internal Step-up: 4.10:1
- Reverse Rotation Available: Yes
- Self Contained: Yes
- Oil Capacity : 6 oz

Specifications:
Boost Options: 8-9 psi for 5.3L and 7-8 psi for 6.0L
HP Gain: 5.3L=60-65% and 6.0L=55-60%
Std Intercooler: 2 core
Programmer supplied

Available Options:
-Polished finish for ProCharger (9" Housing)
-3 core Intercooler System Upgrade
Please select below.

Notes:
-Model year must be specified below.
-Specify 2WD or 4WD, Truck, or SUV
-Specify engine size
-Minor Intercooler system modifications required for HD applications
-Specify if hydroboost option
-E-85 usage for flex fuel vehicle not currently supported, gasoline only
-Due to the wide variance of chassis and options available, modifications may be required
-Due to variability among OEM computers and the prevalence of custom modifications, dyno tuning may be required.