Save up to 40% on VR Forged wheel sets! - Shop Now
Body | Aero - M.Category - Affirm
  See all Fuel Components products

Radium Engineering Fuel Pressure Regulator with 3.0Bar Bosch Regulator

$129.95

Radium Engineering

Model #20-0010-00

Hurry Low Stock


Shopper Award

The Radium Engineering Universal Fuel Pressure Regulator is a must have for those planning on upgrading their FPR. The FPR has been designed and built around an OEM Bosch regulator top which is found in millions of OEM vehicles due to the extremely high quality. Surrounded by a billet aluminum housing that is easily mountable, the regulator body is held by a stainless steel snap ring for an easy removal if needed to be cleaned or replaced.

Each Universal FPR is vacuum referenced with a 1:1 ratio, as intake manifold pressure changes the fuel pressure changes at the same rate. If installed without vacuum, static fuel pressure is easily achievable. Each Universal Fuel Pressure Regulator is equipped with an integrated machined -6AN flare fitting for the return port which ultimately reduces the number of fittings and possible leak points. Each regulator body is laser etched and anodized for a superior finish. Radium offers two options of genuine Bosch regulator tops, 43.5 psi static and 58.2 psi static.

Features:

  • GENUINE Bosch regulator top 3.0 Bar (43.5 psi) static
  • Billet 6061 Aluminum Housing
  • 6AN Male O-ring Adapter Fitting
  • 9/16-18 O-ring Plug Fitting
  • 1/8-27 NPT Port Plug
  • Integrated -6AN Male Return Port
  • Stainless Steel Mounting Hardware & Snap Ring
  • Anodized Aluminum Mounting Bracket
Notes:
  • The exact min, static, and max pressures are influenced by the flow rate of the fuel pump being used. Radium FPRs are tested using a common high flowing Walbro 255lph pump. If a significantly higher flowing pump is used, the minimum pressure ratings may be higher than what is advertised.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Who is Radium Engineering?

Radium Engineering is a company that was founded in 2010. The company specializes in designing and producing some of the best aftermarket products in the market. They have produced parts used by various racers and motorsport enthusiasts worldwide. Today, they have established a name for themselves and have become a brand synonymous with performance.

Quality in Every Product

All of their products are done in house, from research and development, design and manufacturing. They use the latest computer simulation and modeling tools that allow them to create an accurate and precise model. After all is done, they subject their products to an extensive testing procedure to ensure that it is safe to use and performs the way it is designed to.

Not Your Ordinary Stock Parts

The company focuses on manufacturing race-oriented parts and accessories such as surge tank lines and PCV oil catch can systems. They also offer fuel fittings, fuel manifolds, pumps, and fuel regulators designed for high performance applications. All their parts are made out of high quality materials that can withstand extreme forces. 

Purchase Radium Engineering Products At Vivid Racing

If you are in search of a high quality fuel system component for your vehicle, then Radium Engineering is the brand for you. Specifically made for high-performance applications, they are the trusted brand of top racers from different racing disciplines everywhere. To know more about Radium Engineering, visit Vivid Racing and check out their list of products that fit your specific needs.




Warranty

All Radium Engineering brand products are subject to a 1 Year Limited Warranty from the date of original purchase. If a product fails, it will be repaired or replaced at Radium Engineering's option when it has been determined by Radium Engineering to have failed due to defects in materials or workmanship. Warranty claims must be made by the original purchaser. If the purchase was made from a retailer other than radiumauto.com, please contact the place of purchase for further assistance.

This warranty is limited to repair or replacement of the merchandise only and shall not, in no event, exceed the original purchase price. Radium Engineering will not be held responsible for secondary or consequential damages or costs (including labor, towing, etc.) incurred due to failure of this product. Standard ground shipping is used for all warranty transactions. Expedited shipping is available, but the cost difference must be paid by the end user in advance of the shipment.

Warranty claims must ship pre-paid to Radium Engineering for review. Claims must include the failed part(s), RMA number, and original proof of purchase. If the claim is missing any of these items, it may be rejected and returned to sender. Product must be received by Radium Engineering within 14 days of RMA's issue date. Please note that before Radium Engineering can issue an RMA for any product, it is first necessary for the installer or end user to contact info@radiumauto.com to discuss the problem. Most issues can be resolved via email. Under no circumstances should a product be returned or a RMA requested before the above process transpires.

This warranty applies to the original purchaser only and is non-transferable. Improper use, installation, modification, abuse, or unauthorized repairs or alterations voids this warranty. Credit for defective products will be issued pending inspection by Radium Engineering. This warranty does not extend to third party products often used in Radium Engineering products, such as fuel pumps, turbochargers, or any other non-Radium Engineering brand products.

Check out these other great products