Softronic ECU Flash Porsche 996TT GT2860rs Upgrade 700HP Tune
Model: SOFT-996TT-700
Price: $1,994.99
Product Information
Softronic ECU Flash Porsche 996TT GT2860rs Upgrade 700HP Tune The 996 Turbo has evolved in many ways from the original tuners modifying stock turbos to those bolting full on Garrett system. This map was developed for those running a Garrett GT2860rs turbocharger with Tial external wastegates. The map is designed to run using 60lb injectors and an electronic boost controller. Inconjunction with corresponding mods, this ECU tune will take your vehicle up to 700HP to the crank. Modifications should be consulted with a installer and the assistance of Softronic to maximize the potential of your vehicle. The tuned file is designed to eliminate the factory boost controller and raise the factory boost cut from 1.3bar to 1.6bar. For those running catless race pipes, Softronic raises the O2 limiters which trick the computer from throwing a CEL. This map is available for a 91 octane or 93 octane pump gas car as well. Softronic flashes all the 996 Turbo cars via the OBDII port with the provided flasher cable. With their Flasher Client software, they are reading a full 1mb of the file to completely tune the ECU. Other companies claim to be able to do this, but are only read 128kb and making global changes. Softronic will also provided you with your original file. With this original file you can flash your car back to stock at any point. This map includes 2 revisions in the price. If revisions are necessary, you must provide the dyno sheet showing HP, TQ, Boost, and AFR as well as a Durametric datalog. The Durametric cable is required for the revisions to be considered. As tested on a 2001 996TT 6spd, this car made 564awhp and 608ft/lbs of torque on a Mustang AWD dyno. With a 25% drivetrain loss, that is a 705hp to the crank. The car was equipped with Tial 44mm external wastegates, GT2860rs turbos, high flow exhaust system, boost hoses, cold air intake, diverter valves, intercooler pipes, 60lb injectors, and running 1.4bar on 109octane race gas. What are the benefits/functions of going with Softronic compared to the competition?Softronic does not require the removal of your ECU from the car. There is no down time at all. Your car can be flashed at your convenience from the comfort of your own garage. Softronic reflashing is done via a Client Cable that is connected to the OBDII port. The customer simply plugs the cable into the car and reads the file with a laptop per the instructions with the cable. Once the file is downloaded, it is emailed to the Softronic secure server where the file is tuned and then emailed back to the client. The client simply uploads the file and they are done. Total process is about 1 hour. Reflashing is done according to the vehicles octane level of pump gas and modifications are taken into account (Intake, Headers, Exhaust) to enhance power gains. Another function available through Softronic is the Launch Control. This allows the driver to initiate a launch at 5200 RPM with .2 Bar of boost. To Learn More CLICK HERE . If you would like to receive remote assistance, please select below. For more information - CLICK HERE .For Install Instructions CLICK HERE For an extra $300, we will return the file to you within 1 hour during normal business hours of 8am-5pm EST. This does not apply to custom tunes or DFI cars - CLICK HERE .
Choose Available Options:
About Manufacturer: Softronic SOFTRONIC is a Connecticut based Corporation with worldwide manufacturing and sales in automotive software and electronics. They specialize in the impossible or the unimaginable. Their current Flash Client can read and write an entire automotive control unit complete, in less time than all other tuning or factory automotive software systems. There is no Binary that can hide from anyone at SOFTRONIC, whos electronics are also just as amazing as their software, pushing the envelope on technology and design.