EVO X Intake Dyno Testing Part 1

We finished the prototype components for the EVO X intake system. This includes the suction pipe to the turbo and short ram intake kit with heat shield that connects to the factory air scoop.

The car did really well actually with the complete intake kit and suction pipe. The car by nature from the factory ran quite rich. With the addition of the intake components, it leaned the car out to a safe tunable AFR which gave it a ton of power. The boost was consistant but heavily drops off. We definitely need to get a boost controller and/or have some ECU tuning done. We suspect that with the intake and a good turbo back exhaust (coming soon) the car will pick up about 40HP easily.

Final testing will be done on the intake kit which will be sold as just the short ram or just the suction pipe. You will be able to get it at a combination as well. We hope to start production by Monday and have product shippable within 2 weeks.

Here is the dyno sheet from the run. Stay tuned!

Gallery is here - http://www.vividracing.com/forums/ga...ages.php?c=307

[apexwrx]

woot

[tybalt]

Thats sick. I cant wait to see the intake/exhaust combo when tuned.