Save up to 40% on VR Forged wheel sets! - Shop Now
BRAKES - AFFIRM
  See more parts for your Jeep Wrangler

TeraFlex 0-3.0" Lift Front Tera44 R44 Rubicon Axle with 4.10 Ring and Pinion and OEM Locker Jeep JK|JKU Wrangler 2007-2018

$4,794.99

TeraFlex

Model #3524410

Free Shipping


Shopper Award

TeraFlex JK Front Tera44 R44 Rubicon Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as OEM Rubicon locker, choice of Spicer ring and pinion gear ratio, Spicer bearings and install kits, TeraFlex heavy-duty ball joints, and factory yoke.

Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housings a true DIY process!

TeraFlex heavy-duty JK Front Tera44 R44 Rubicon Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler and Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK Wrangler owners looking to beef up the front axle's weak areas.
Fits:

  • JK Wrangler Rubicon (2-door) - front
  • JKU Wrangler Unlimited Rubicon (4-door) - front

Includes:

  • OEM Rubicon locker
  • Spicer ring and pinion - 4.10
  • Spicer bearings and install kits
  • TeraFlex HD ball joints
  • Factory yoke

Features:

  • 3.25 inch O.D. x 0.5 inch wall axle tube increases strength to resist bending and torsion w/ minimal weight increase
  • Pre-installed inner axle seals
  • Forged HD inner knuckles w/ greater upper and lower section strength
  • Ductile cast iron housing w/ increased rib gussets
  • HD ductile iron differential cover
  • Asymmetric housing design, for extra-long tube side strength
  • Smooth radius bottom design to glide over rocks and obstacles
  • Integrated lower flexarm skid plates
  • Bottom oil drain hole for simple fluid changes
  • Premium UV protected triple-stage powder coat process for superior corrosion resistance
  • 1/4 inch-thick CNC laser cut axle brackets for extreme strength
  • Integrated factory location upper control arm mount
  • Pre-installed upper control arm bushings
  • Reinforced front track bar mount (ties into spring pad) for greater strength
  • Proper pinion angle for lifted JK applications
  • Pre-tapped hole on spring perch for bump stop extensions
  • Pre-drilled holes for limit straps and lower spring retainers
  • Retains all JK ESP, ABS, and speedometer sensor capability
  • 100 percent engineered, designed, and built in the USA
  • 100 percent new components
  • 1-Year/Unlimited Mileage Warranty
  • Lift Height: 0-3.0 inch
  • Width: 67 inch WMS-WMS (stock)
  • Axle Tube: 3.25 inch x 0.5 inch
  • Ring and Pinion: 4.10
  • Install Time: 6 Hours

Note:

  • The R44 axle works w/ factory axle shafts and Rubicon locker (part number 68017176AA) or part number OX D44-JKR-30 locker. The ARB RD157 locker or the # OX D44-JKR-30 locker can be used w/ new 35 spline axle shafts.

Requirements:

  • Control Arm Upgrade
    • 0-3 inch Lift: This axle is a direct bolt-on upgrade! Although stock control arms will work at this Lift height, aftermarket flexarms may be used if desired - highly recommended w/ a 3 inch Lift.
    • 0-3 inch Lift: This axle is a direct bolt-on upgrade! Although stock control arms will work at this Lift height, aftermarket flexarms may be used if desired - highly recommended w/ a 3 inch Lift.
    • Front upper (part number 1252200) and front lower (part number 1252000) TeraFlex JK Sport Flexarms will work w/ 2.5-3 inch lifts.
    • Front upper (part number 1415520) and front lower (part number 1415500) TeraFlex JK adjustable Alpine Flexarms will work w/ 2.5-4 inch lifts.
    • Front upper (part number 1315520) and front lower (part number 1315500) TeraFlex JK adjustable Alpine Long Flexarms will work w/ 3-6 inch lifts.
  • Axle Shaft Upgrade
    • 0-6 inch Lift: High-quality aftermarket axle shafts will enhance your set up. We recommend RCV or TEN Factory high-end shafts. Stock Rubicon axle shafts may also be reused.
  • Axle Shaft Tube Seal Upgrade
    • 0-6 inch Lift: Get serious with HD 0.5 inch wall seals (part number 4354050) or keep it real with standard 0.25 inch wall seals (part number 4354025). Stock seals may also be reused.
  • Steering System Upgrade
    • 0-3 inch Lift: The JK HD Tie Rod and Drag Link Steering Kit (part number 1853900) will do the trick, though the stock steering system may be reused.
  • Brake Upgrade
    • 0-6 inch Lift: Experience a notable difference w/ a TeraFlex Big Brake Kit (part number 4303400 or part number 4303420) or JK Big Rotor Kit (part number 4303480 or part number 4303490).

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2007-2018
Jeep Wrangler

Who is Teraflex?

Teraflex is an aftermarket company that specializes in manufacturing various parts and components for the Jeep Wrangler. With their history going back to the 1950s distributing parts for the military jeeps, they have become the leading experts when it comes to the jeep platform and is the go to brand of many Jeep owners today.

Jeep Experts

The company offers products that directly fit most Jeep models. They offer suspension parts, body armors, differential covers and more. All of their products are made in-house, ensuring that they would be able to maintain their high-level of standard. They have applied their years of experience to create top-notch products that satisfy their customer’s demands.

Revolutionizing the Jeep Industry

Being the leader in the market, they are also the pioneers of aftermarket parts when it comes to this platform.  They were the first company to introduce aftermarket parts to the then brand new released TJ Wrangler. They offered an upgrade to the newly designed coil over suspension of the TJ series and has also provided a solution to the platform’s transfer case low gearing. They have helped the TJ platform become a key player in the offroad world, which help the company cement its position as the no.1 source of Jeep accessories.

Purchase Teraflex Products at Vivid Racing

If you own a Jeep and want to turn it into a better offroad performing machine, then Teraflex is the right brand for you. With decades of experience in the industry, you can be sure that you will only be getting the best value of the product for your money. Visit Vivid Racing and check out their list of products that would fit your specific needs. 

TeraFlex Inc. warrants TeraFlex products to the original retail purchaser to be free of defects in material and workmanship for as long as the original purchaser owns the vehicle on which products were originally installed unless otherwise specified. This warranty does not cover or include product finish, improperly installed or applied products, improperly maintained products, products used for racing or competition or damage due to abuse or neglect.

Failure to complete regular maintenance on TeraFlex flexarms (grease every 3000 miles) will void this warranty.

All TeraLow products are warrantied to be free of defects in material and workmanship for two years from date purchased.

TeraFlex axles are covered by the TeraFlex Inc. 12-month warranty to be free of defects in materials and workmanship from date purchased.

All Falcon Shocks are warrantied to a period of three years from the original date of purchase. Upon verification, TeraFlex Inc. will repair or replace the shock absorber at no cost.

To file a warranty claim please call our customer service department at 801-713- 3314, Monday - Friday, 8 am - 5 pm MST. Closed Saturday, Sunday and all major holidays.

Check out these other great products