BM 112006 Prerunner/Trail Transmission, 2WD TH-400 Standard Valve Body for GM Small Block and Big Block
Automotive Item Grade: High Performance
Brake Included: No
Built-In Transmission Shield: No
California Proposition 65 Chemical Name: Lead
California Proposition 65 Required: Yes
Case Material: Cast Aluminum
Control Type: Hydraulic
Cooler included: No
Core Change Applicable: No
Dipstick included: No
Drive Type: RWD
Emission Code: 5
Friction Plates: New
Gear Ratio-First: 2.48
Gear Ratio-Second: 1.48
Gear Ratio-Third: 1
Horsepower Rating (HP): 600
Horsepower Rating (HP): 600
Manual Valve Body: No
Part Type: Off Road
Product Type: Automatic Transmission Assembly
Prop 65 - Short Label: prop65_warning.jpg
Prop 65 (C, R or CR): CR
Prop 65 Yes/No: Yes
Reverse Gear Ratio: 2
Reverse Pattern: No
Tailshaft Length (In): 4
Title: B&M - TRANSMISSIONS
Torque Converter Included: No
Torque Rating (Ft/Lbs): 550
Transmission Model: TH400
Transmission Pan Finish: Natural
Transmission Pan Material: Aluminum
Transmission Pan Type: Deep, Cast
Transmission Series: Prerunner/Trail
Transmission Speeds: 3
Transmission Type: TH400
Valve Body Configuration: Recalibrated
Valve Body Pattern: Forward
Valve Body Type: Automatic
Warning: California Proposition 65
WARNING: This product can expose you to chemicals including Lead, Chromium (hexavalent compounds) and Benzene which are known to the State of California to cause cancer, cause birth defects, or other reproductive harm (For more information go to www.p65warnings
Universal Fitment: These products should work with your vehicle as they are universal for fitment. We do recommend the customer researches and does due diligence regarding application. This should help confirm that this will work for your vehicle.
B&M Racing has been at the forefront of the automotive aftermarket since the early 1950s. Its founders, who are racers themselves, identified the needs of racing/performance enthusiasts and fabricated products to fill those needs. This includes shifters, coolers, transmission pans, differential covers, performance transmissions, and more! To this day, B&M Racing remains at the vanguard of the aftermarket world, leading and setting new standards through its consistent development of cutting-edge products. The brand is dedicated to addressing the ever-changing needs of vehicles and consumer demands, whether it is for racing, everyday use, recreational use, or for mere upgrade purposes. No matter the application, B&M Racing offers quality reliable products that get the job done.
B&M Racing recently discovered several fields in the off-road market that it felt needed more attention – particularly in the UTV area. And so, B&M Racing joined forces with industry-leading Flowmaster to form the XDR Off-Road Group. Together, they released a number of gated shifters, exhausts, and accessories for highly popular vehicles like the Can-Am Mavericks, Polaris RZRs, Yamaha YXZ1000s, and Textron Wildcat XXs.
B&M Racing’s Many Inventions
It was B&M who came up with the idea to use a performance reinforced Hydramatic for racing in the 1950s. Then in the 1960s, it was B&M who developed shifters and race converters to accompany it. In the 1970s, B&M Racing debuted its shift and transmission improving kits. As racing and street performance increased worldwide, B&M Racing used its extensive experience and know-how and applied it to the needs of everyday drivers, racers, and gearheads around the globe. The company takes pride in being among the very first to identify a vehicle’s needs in the aftermarket and supply car enthusiasts with exactly what they need to succeed.
Upgrade to B&M Racing Parts Today
Vivid Racing offers a wide selection of B&M Racing parts, including complete transmissions, differential covers, transmission pans, transfer cases, torque converters, shift knobs, short shifters, filter extensions, and much more! If you have any questions regarding the products listed above or about B&M, please contact our expert sales team at (480) 966-3040.
B&M® Product Warranty Details
Lifetime Limited Warranty applies to all B&M shifters, differential covers and cast aluminum pans.
One Year Limited Warranty applies to B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products).
90 Day Limited Warranty applies to B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids).
B&M Racing & Performance ("B&M") extends the following limited warranty to the original purchaser of its shifters, pans, coolers, transmissions, components and accessories (hereafter "products").
B&M warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear (bushings, springs, etc.), cosmetic issues such as coatings and material discoloration, or any product that was installed on a racing vehicle (excluding shifters), installed contrary to B&M instructions, or altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.
The warranty set forth herein for all B&M shifters, differential covers and cast aluminum pans extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products) extends for a period of one year from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids) extends for a period of 90 days from the date of original purchase and the original vehicle it was installed on.
To make any claim under the terms of this limited warranty please contact B&M and obtain a Returned Material Authorization (RMA) number. Once the RMA number is received, the original purchaser may return the product to address provided by B&M along with the RMA number and Proof of Purchase of the covered product. The Proof of Purchase must clearly show the place of purchase, purchase price, product purchased, and date of purchase. If upon inspection by B&M the product is found to be defective in material or workmanship, B&M shall at its option, either exchange the product for new product with the same part number or refund the original purchase price.
This warranty is not contingent upon the purchaser's completion of the Warranty Registration Form found on the B&M website. If however the purchaser completes and submits that form at the time of purchase, B&M will keep that form on file which may serve as an aid in determining warranty coverage in the event of the loss of the original purchase receipt. B&M's liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. B&M shall have no liability for the cost of installation or removal of the defective product, the cost of labor or any additional parts required to complete the installation of the replacement product, towing or transportation costs, or return shipping costs. In no event shall B&M be liable for any direct, indirect, special, incidental and/or consequential losses or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if B&M shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.
The warranties set forth herein are exclusive and unless otherwise required by applicable law, no other warranties are made by B&M or are authorized to be made with respect to the product.