The Anchor rail is constructed from high strength aluminum and is available in a variety of lengths. The sleek design maintains a small non-obtrusive profile. The anchor rail is strong enough to secure a variety of items.
The anchor rings are easily positioned and extremely strong with an assembly break strength of 4000 lbs and work load limit of 1,333 lbs. Anchor rail 882, Anchor rings 883 and mounting hardware kits 887 can be purchased separately.
- Single 24 inch Anchor Rail:
- (1) 24 inch long rail only (no anchor rings or mounting hardware).
- Strong and durable aluminum construction
- Attractive aluminum mill finish
- Small Profile
- Anchor rings are easily installed, removed and adjusted in seconds
- Anchor rings have an assembly break strength of 4000 lbs and work load limit of 1,333 lbs
- Anchor rail is available in a variety of different lengths
- The rails could also be easily cut to a custom size by the customer with a typical hacksaw.
Any surface that has sufficient space and is strong enough to support the mounted rails and the weight of any items intended to be secured down during a collision. Surface must be strong enough to prevent the hardware from pulling through. Never exceed the capacity of the mounting surface and anchors.
Drill mounting holes in the mounting surface that correspond with the holes machined in the anchor rails and fasten. Mounting hardware is included in rail kits and also available separately 887 single fastener kits. (3 kits are recommended per rail for the 12 inch long, 5 kits per rail are recommended for the 24 inch long, and 10 kits are recommended per rail for the 48 inch rail)
The Tuffy WarrantyWe build Tuffy steel products to last a lifetime and that's how long we'll stand behind them. Tuffy steel products are fully warranted against defects in material and workmanship, excluding the coating, under normal use during the time that the original owner possesses the vehicle in which the part is installed and used. Products which are not manufactured by Tuffy Security Products at their facility including, but not limited to, component parts and accessories are covered by their manufacturers standard warranty not the Tuffy warranty. Tuffy aluminum products are covered by this warranty for one year from the date of purchase by the original owner.
Warranty does not cover rusting, the coating, expenses for installation, service, or down time. Warranty does not cover material, labor, or additional parts required for replacement or repair of damages, malfunctions, or service failures caused by abuse (including fire or wreckage), misuse, neglect, failure to follow the manufacturers operating and/or installation instructions, repairs made or attempted by unauthorized persons, and/or any claim for incidental or consequential damages for breach of any express or implied warranties.
Tuffy Security Products, Inc. shall only be responsible to the extent of replacing or repairing materials supplied to customers which are determined by Tuffy Security Products, Inc. to be defective and shall have no liability beyond such repair or replacement. Tuffy Security Products, Inc., expressly disclaims all other warranties, express or implied, and specifically disclaims any implied or other warranty of fitness for any particular purpose for which the product is supplied without Tuffy Security Products, Inc.'s knowledge or consent.
Any use or application of the material and/or products supplied to its customers for the purpose not intended for such material and/or products shall operate to void all warranties and Tuffy Security Products, Inc. expressly disclaims any liability resulting from material and/or product failure in such event.
Proof of purchase is required. Special order and custom products are exempted from this Tuffy Warranty.