APR Front Carbon Wind Splitter Hyundai Tiburon 04+
A Wind Splitters is a protruding flat surface in the front of a car that is designed to decrease front end lift and exert downforce. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.
Features:
- Carbon Fiber Reinforcement - All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
- Fully Functional Undertray - Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.
- Support Rods Included - Supporting every APR Front Wind Splitters are stainless steel Support Rods.
Notes:- Products are made to order. Production time is 2 weeks.
|
Make
Vehicle
|
Model |
Submodel |
Year |
Engine |
Notes |
1996, 2004-2008
Hyundai
Tiburon
|
Tiburon |
|
1996, 2004-2008 |
|
|
Since 2002, APR Performance has created special project vehicles that highlight our company’s capabilities at producing quality products. Every APR Project vehicles are debuted at the Specialty Equipment Market Association (SEMA) Show in Las Vegas, Nevada. APR manufactures high quality aerodynamic components from carbon fiber and fiberglass. They are well known with their adjustable carbon fiber GTC wings and front wind splitters. APR has also created many widebody kits as seen on the STI, EVO VIII, Celica, and S2000. The APR product extends to aero mirrors, strut bars, radiator shrouds, rear diffusers and more. APR products are designed for performance and proven on the race track.
LIMITED PRODUCT WARRANTY
All products manufactured by APR Performance are fully warranted against defects in workmanship and materials for one (1) year from the time of purchase. If any product is suspected of being defective, the customer may elect to return the product to APR Performance. APR Performance will not accept any C.O.D. returns unless specified by an APR Performance representative. Any item that is determined to be defective will be repaired or replaced. On any warranty claim, APR Performance will be responsible for APR Performance parts only. APR Performance is not responsible for any labor or inconvenience charges incurred by the customer. Questions about the APR Performance Limited Product Warranty policy may be directed toward an APR Performance representative at sales@aprperformance.com.
A. Warranty Policy
i. If a product should fail due to manufacturer’s defect within the stated warranty period, APR Performance will repair or replace the failed product.
ii. It is the responsibility of the customer/installer to verify the correct size and application of the parts before installation, and to ensure that proper installation is performed. Problems or failure caused by improper installation are not covered under the APR Performance Limited Warranty.
iii. Warranty claims shall be serviced by the applicable seller (APR Performance or Authorized Dealer/Reseller).
iv. If an item is returned and exhibits damage not covered by the APR Performance Limited Warranty, a quote will be generated for repair or replacement, plus delivery to the owner. At that time, the owner will have a choice to either pay for the repair or replacement, or request that the item be returned without any action taken by APR Performance. If Warranty requirements are met, the repaired or replaced item will be returned without charge and will continue to be covered for the balance of the original warranty period.
v. All return shipments must be freight prepaid and insured (against loss or damage) with tracking number. No C.O.D. shipments will be accepted. If the warranty claim is fulfilled, the additional shipping expenses incurred will be compensated.
vi. APR Performance is not responsible for any labor or inconvenience charges incurred by the customer.
B. Return Process for all Purchase and Warranty Returns
i. Retail customers that purchased product from an Authorized Dealer/Reseller must contact their respective dealer/reseller to initiate the return process.
ii. Retail customers that purchased product directly from APR Performance may contact APR Performance Customer Service at (909) 594-3796 or sales@aprperformance.com to request for a Return Merchandise Authorization (RMA) number. When e-mailing for an RMA number, please include the following information: copy of the invoice, brief description of the problem, full name, return e-mail address (if different from the originating e-mail), shipping address, phone number and best time to call. Once an RMA number is received from APR Performance, it should be clearly marked on the outside of the box. The following information must be included inside the box: A copy of the invoice, reason for return, name, phone number, and return address. Ship the return package to: APR Performance, Inc., Attn: RMA Department, 225 Pacific St Pomona, CA 91768
WARNING: Cancer and Reproductive Harm
