Save up to 40% on VR Forged wheel sets! - Shop Now
BRAKES - AFFIRM
  See more parts for your Ford Mustang

BBK Performance Parts 76mm 30lb CAC Billet Aluminum Mass Air Meter Ford Mustang 5.0 1986-1993

$399.99 SALE: $369.99

BBK

Model #80055

Free Shipping


Shopper Award

Features:

  • Ford Mustang Mass Air Meter Calibrated For Your Mustang
  • 76mm Housing For Additional Airflow for More Power
  • RAW CNC Machined 356 Billet Aluminum Housing (As Shown)
  • Custom Calibrated For 30lb Injectors And A Fender Well Style Cold Air Intake
  • Cold Air Calibration (CAC)
  • Precisely Calibrated Electronic Sensor for Accurate A/F Ratio
  • Calibrated for 30 lb/hr Injectors And Air Entering From A 90 Degree Cold Air Elbow.
  • Includes 6 Pin To 4 Pin Connection Adapter For Direct Plugin To Factory Harness
Vehicle Fitment:
  • 1986-1993 Ford Mustang 5.0L LX, GT & Cobra
Precisely Calibrated
This BBK 76mm mass air meter for 1986-1993 Ford Mustang 5.0L is calibrated to work with 30 lb/hr injectors and a fender well cold air intake to support more power. Starting with an all new 356 aluminum casting each unit is fully CNC machined to exact specifications before being fitted with one of BBK's electronically calibrated mass air sensor modules to ensure an accurate air/fuel ratio for the best possible performance potential.

Gain Up To 15 RWHP in Minutes
Dyno testing has shown up to 15 RWHP gains while maintaining an accurate air/fuel ratio unlike some competitor's units that are not electronically calibrated and may fail to maintain the all important air/fuel ratio.

Installation
BBK Mustang mass air meters are designed to be a direct fit for a simple installation. All you have to do is swap the BBK MAF in place of the stock meter.

For Instructions CLICK HERE

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1986-1993
Ford Mustang

1986-1993
Ford Mustang GT

Who is BBK Performance?

BBK Performance is an aftermarket company that was established in 1988. They specialize in creating performance parts for muscle cars and was founded by Brian and Ken Murphy. They were the first to design and manufacture an aftermarket air intake system and performance throttle bodies for the fuel-injected 5.0 Mustang and TPI Camaros. 

Today they have expanded their offering to a wider range of vehicles catering to other modern cars and trucks as well and with more performance parts such as exhaust systems, suspension parts, and more.

Experienced Manufacturer

BBK has been developing and manufacturing performance parts for over 20 years and has used that gathered knowledge to improve their products. Their parts are considered as high standards and are comparable, if not better to the Original Factory parts.

Ease of Installation

The company ensures that its clients would have a hassle-free experience from purchase to installation. Hence, all their products are a direct bolt on to the vehicle. It also comes with a comprehensive installation manual and all the necessary hardware needed for the install.

Continuously Growing

The company initially started in a 1200 square feet building in Southern California. Today, they have grown to a 200,000 Sq ft facility that houses their own research and development center with a built-in dynamometer and state-of-the-art manufacturing pieces of machinery. The company also employs the industry's leading craftsmen, making sure that their customers would only get the best product for their money.

Purchase BBK Products at Vivid Racing

If you are in search for top-notch performance parts for your vehicle, then check out BBK Performance. They carry a long list of parts that would fit most modern vehicles today. Visit Vivid Racing and see what BBK has to offer. You will surely find the right parts for your specific needs.

BBK PERFORMANCE WARRANTY GUIDELINES
  1. All BBK products are warranted against any defect in materials or craftsmanship for a period of one year from the date of purchase. These terms apply as long as it has been established that the product in question was installed and used in accordance to all BBK guidelines and was not used for racing or competition purposes.
  2. BBK Performance will not be held responsible for any consequential or incidental damages incurred during installation and will not be held responsible for any incidental or labor charges on any products that are defective, warranted, damaged, or parts that were purchased incorrectly. PLEASE NOTE SOME PRODUCT SPECIFICS ARE NOT COVERED BY WARRANTY - SUCH AS ELECTRONICS, COATINGS/FINISHES, BUSHINGS AND HOSES ETC. - RUST/RUSTING IS NOT COVERED BY WARRANTY.
  3. If your warranty issue is after the stores replacement or return policy (usually 30 days) - you will need to contact the BBK Performance warranty department directly via e-mail warranty@bbkperformance.com to request a warranty return number and warranty approval.

    BBK will e-mail you a request for a copy of the original product receipt and also a product questionnaire to fill out to help us determine why the BBK product has caused a warranty issue.

    The original receipt must show the original date of purchase and it must also be supplied via e-mail along with the product questionnaire or the warranty is null and void. If your part is approved for a warranty return, you will be issued a Return Goods Authorization number (RGA) and the BBK return address to send the part back for inspection.

    Please be sure to include your name, return address and contact phone number in the box when you ship the part back for identification purposes. PRINT OFF THE RETURN APPROVAL FORM WE E-MAIL TO YOU AND PUT IN THE BOX IS THE SIMPLEST WAY AS IT CONTAINS ALL YOUR INFORMATION INCLUDING THE RGA #.

    The Item must be shipped back to BBK prepaid via ground shipping. ALL SHIPPING CHARGES ARE CUSTOMERS' RESPONSIBILITY - NO SHIPPING CHARGES WILL BE REFUNDED. WE WILL PAY THE SHIPPING CHARGES TO SHIP THE ITEM BACK TO YOU.

    The return authorization number (RGA) must be clearly marked on the outside of the package in order for our warranty department to process the item. If no RGA is visible - or if package is sent collect freight - package will be refused and sent back to you at your expense.

    Upon receipt of your warranty return it will be inspected by our BBK warranty engineers. If your BBK Product is determined to be defective and covered by our warranty, the item will be immediately repaired or replaced at no cost to the consumer. PLEASE NOTE: WE DO NOT ISSUE ANY KIND OF PRODUCT REFUNDS ON ANY WARRANTY RETURNS; THIS INCLUDES SHIPPING AND LABOR CHARGES.
  4. ALL Warranty Returns are processed within 2-3 days of receipt and you will be notified of the status of your return - please refer to your RGA # you were issued in all communications with us - warranty@bbkperformance.com
  5. All warranties are valid from the original date of purchase only - they are NOT pro-rated based on a warranty part - replacement or repair.
  6. BBK Performance is not responsible for product fitment, print, Internet typographical and photographic errors.
  7. BBK Performance reserves the right to charge a minimum 15% restocking fee for all non-defective RGA requests or returned items purchased directly from the www.bbkperformance.com website in error.

Installation Instructions

Click to view the Installation Instructions here

Video Clip

Check out these other great products