Save up to 40% on VR Forged wheel sets! - Shop Now
Whiteline Category Banner
  See more parts for your Chevrolet Suburban

BBK Performance Parts Bumpsteer Kit Ford Mustang 2005-2014

$299.99 SALE: $249.99

BBK

Model #2563

Hurry Low Stock


Shopper Award

Features:

  • Fits All 2005-2014 Mustang Factory Steering Racks
  • Recommended To Correct Suspension Geometry on Lowered Cars
  • High Quality, Bind-Free Heim Joints
  • Durable Aluminum & Steel Bearing Construction
Vehicle Fitment:
  • 2005-2014 Mustang GT, Boss 302 or V6
Correct Your Suspension Geometry
BBK Performance Gripp heavy duty 2005-2014 Mustang bump steer kits are a perfect handling upgrade and allow adjustment to ensure proper alignment geometry when installing lowering springs on your S197 Mustang.

Designed to Perform
BBK bump steer kits are built from CNC machined aluminum and fitted with only the highest quality heim joints. These units receive a graphite colored anodized finish for a perfect look with all Mustang colors.

What is Bump steer?
Bump steer is when the front toe setting changes as the suspension moves up and down. This happens when the arc that the spindle travels during suspension compression and droop is not the same as the arc of the tie-rod end. If the toe changes more than a very small amount the front wheels begin steering themselves without any input from the driver.

This makes the car feel unstable and unpredictable over bumps with body roll or brake dive. The arc of the spindle and the arc of the tie-rod end are determined by the lengths of the links involved and their physical location with respect to each other. When the front suspension is heavily modified such as relocated inner control arm pivots or swapping spindles with different tie-rod end locations the tie-rod geometry must be restored to minimize bump steer.

For Instructions CLICK HERE

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1977
Chevrolet Suburban

2005-2014
Ford Mustang

2012-2013
Ford Mustang Boss 302

2005-2009, 2011-2014
Ford Mustang GT

2010-2014
Ford Mustang GT500

Who is BBK Performance?

BBK Performance is an aftermarket company that was established in 1988. They specialize in creating performance parts for muscle cars and was founded by Brian and Ken Murphy. They were the first to design and manufacture an aftermarket air intake system and performance throttle bodies for the fuel-injected 5.0 Mustang and TPI Camaros. 

Today they have expanded their offering to a wider range of vehicles catering to other modern cars and trucks as well and with more performance parts such as exhaust systems, suspension parts, and more.

Experienced Manufacturer

BBK has been developing and manufacturing performance parts for over 20 years and has used that gathered knowledge to improve their products. Their parts are considered as high standards and are comparable, if not better to the Original Factory parts.

Ease of Installation

The company ensures that its clients would have a hassle-free experience from purchase to installation. Hence, all their products are a direct bolt on to the vehicle. It also comes with a comprehensive installation manual and all the necessary hardware needed for the install.

Continuously Growing

The company initially started in a 1200 square feet building in Southern California. Today, they have grown to a 200,000 Sq ft facility that houses their own research and development center with a built-in dynamometer and state-of-the-art manufacturing pieces of machinery. The company also employs the industry's leading craftsmen, making sure that their customers would only get the best product for their money.

Purchase BBK Products at Vivid Racing

If you are in search for top-notch performance parts for your vehicle, then check out BBK Performance. They carry a long list of parts that would fit most modern vehicles today. Visit Vivid Racing and see what BBK has to offer. You will surely find the right parts for your specific needs.

BBK PERFORMANCE WARRANTY GUIDELINES
  1. All BBK products are warranted against any defect in materials or craftsmanship for a period of one year from the date of purchase. These terms apply as long as it has been established that the product in question was installed and used in accordance to all BBK guidelines and was not used for racing or competition purposes.
  2. BBK Performance will not be held responsible for any consequential or incidental damages incurred during installation and will not be held responsible for any incidental or labor charges on any products that are defective, warranted, damaged, or parts that were purchased incorrectly. PLEASE NOTE SOME PRODUCT SPECIFICS ARE NOT COVERED BY WARRANTY - SUCH AS ELECTRONICS, COATINGS/FINISHES, BUSHINGS AND HOSES ETC. - RUST/RUSTING IS NOT COVERED BY WARRANTY.
  3. If your warranty issue is after the stores replacement or return policy (usually 30 days) - you will need to contact the BBK Performance warranty department directly via e-mail warranty@bbkperformance.com to request a warranty return number and warranty approval.

    BBK will e-mail you a request for a copy of the original product receipt and also a product questionnaire to fill out to help us determine why the BBK product has caused a warranty issue.

    The original receipt must show the original date of purchase and it must also be supplied via e-mail along with the product questionnaire or the warranty is null and void. If your part is approved for a warranty return, you will be issued a Return Goods Authorization number (RGA) and the BBK return address to send the part back for inspection.

    Please be sure to include your name, return address and contact phone number in the box when you ship the part back for identification purposes. PRINT OFF THE RETURN APPROVAL FORM WE E-MAIL TO YOU AND PUT IN THE BOX IS THE SIMPLEST WAY AS IT CONTAINS ALL YOUR INFORMATION INCLUDING THE RGA #.

    The Item must be shipped back to BBK prepaid via ground shipping. ALL SHIPPING CHARGES ARE CUSTOMERS' RESPONSIBILITY - NO SHIPPING CHARGES WILL BE REFUNDED. WE WILL PAY THE SHIPPING CHARGES TO SHIP THE ITEM BACK TO YOU.

    The return authorization number (RGA) must be clearly marked on the outside of the package in order for our warranty department to process the item. If no RGA is visible - or if package is sent collect freight - package will be refused and sent back to you at your expense.

    Upon receipt of your warranty return it will be inspected by our BBK warranty engineers. If your BBK Product is determined to be defective and covered by our warranty, the item will be immediately repaired or replaced at no cost to the consumer. PLEASE NOTE: WE DO NOT ISSUE ANY KIND OF PRODUCT REFUNDS ON ANY WARRANTY RETURNS; THIS INCLUDES SHIPPING AND LABOR CHARGES.
  4. ALL Warranty Returns are processed within 2-3 days of receipt and you will be notified of the status of your return - please refer to your RGA # you were issued in all communications with us - warranty@bbkperformance.com
  5. All warranties are valid from the original date of purchase only - they are NOT pro-rated based on a warranty part - replacement or repair.
  6. BBK Performance is not responsible for product fitment, print, Internet typographical and photographic errors.
  7. BBK Performance reserves the right to charge a minimum 15% restocking fee for all non-defective RGA requests or returned items purchased directly from the www.bbkperformance.com website in error.

Installation Instructions

Click to view the Installation Instructions here

Video Clip

Check out these other great products