Many UTV enthusiasts feel that the factory form of the Can-Am X3 is good enough. Others feel it should be treated the same as a vehicle and modify it to personalize it and maximize fun. This can be achieved by simply installing a set of wheels and tires of the machine.
The difference wheels and tires make is not just aesthetic. It can improve the handling of the machine through trails and dirt and increase overall comfort while doing so. A larger wheel and tire setup can also slightly raise the ride height allowing for more ground clearance.
Our customer @canamx3_life opted to go with Method Race Wheels MR401 wrapped in a Tensor DS32. The 32-inch tire gives optimal ground clearance with tons of grip to go around, keeping the machine planted. Being that the sidewall is fairly large, the comfort provided by the Tensor is exponential.
The stylish spoke design of the MR401 blends well with the aggressive look of this particular machine. With the beadlock design, the MR401 locks the DS32 in place preventing the possibility of debeading when out on a trail or climbing rocks. This design also adds that rugged off-road look due to the beadlock ring and bolts.
Purchase Your MR401 Method Race Wheels Here!
Features:
- Diameter – 14-inch or 15-inch
- Width – 5″ through 10″
- Multiple offsets available
- Various lug patters and center bores offered
Click Here To Purchase Your DS32 Tensor Tires
If you have any questions, please contact us. You can reach us by phone at 1-480-966-3040 or via email at [email protected].
