AEM Performance Electronics has released a “Controls Pack” style harness adapter (PN 30-3813) for Ford Coyote 5.0L race engines. The 30-3813 Coyote wiring harness connects to the Coyote’s factory engine wiring harness for quick and easy installation of an Infinity-8 standalone programmable EFI unit (PN 30-7101) onto a Coyote race engine.
REQUIRED ITEMS
Two Bosch 4.2LSU sensors are required for Lambda feedback control (PN 30-2001). A MAP sensor (PN 30-2130-50 3.5BAR) and air inlet temp (AIT) sensor (PN 30-2010 3/8″ NPT) are required for conversion to speed density. MAF is not supported. AEM offers higher pressure MAP sensors for high boost applications.
AEM recommends the purchase of its Infinity Auxiliary Sub Harness (PN 30-3510-00) for easy installation of the MAP and AIT. This sub harness connects to the DTM-style 12-pin connector for adding common aftermarket sensors including fuel pressure, oil pressure, boost control solenoid and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and high side output for activating a solenoid, and switched inputs for auxiliary radiator fan, boost target and no-lift shift.
The 30-3813 Coyote wiring harness includes a connector to enable control of the Ford Racing Boss 302 Alternator Kit (Ford PN M-8600-M50BALT). Users who do not have this alternator may need to purchase it for proper connection.
The Drive-by Wire pedal assembly is not included with the 30-3813 Coyote wiring harness. For Drive-by-Wire integration the Ford pedal assembly (Ford PN BR3Z-95836-D) is required.
Contact a Vivid Racing Sales Specialist today to order
1-866-448-4843
