When it comes to off-road lights, Baja Designs is at the top of the list. For over two decades, this company has garnered a solid reputation for producing the highest-quality lighting packages and individual components to dress up your ride. Not only do Baja Designs’ impressive selection of lights look good, but they also deliver impeccable performance which translates to added safety for you and those around you. Baja Designs’ latest product release comes in the form of new fog lights, bumper lights, and reverse lights for the 2020-On GMC 2500 and 3500 trucks. And with cutting-edge technology like MoistureBlock, you can guarantee that these light sets will keep you illuminating the roads and the trails for years and years to come. 

View Full Baja Designs Inventory Here

S1 Fog Pocket Kit

The Baja Designs Fog Pocket kit is the perfect combination of high-quality on- and off-road performance for your 2020-On GMC 2500 or 3500. Available in white or amber, this kit utilizes the factory fog pocket location to pack two S1 lights on each side. This kit is controlled by the factory fog switch to operate the lower pair S1 lights. The upper pair of S1 lights are operated by your high beams. The included wiring harness is designed to be used in conjunction with factory light switches, and sPOD / Switch-Pros units. If you’re looking to add optimal lighting performance with added safety, this is your kit! 

Lumens: 2,375 Utilizing 1 LED
Wattage/Amps: 20W / 1.45A
Dimensions: 2.1″ x 2.1″ x 2.1″
Safe Voltage Range: 9-28V
Weight: 0.4 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Hard Anodized & Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum

Includes:

• x2 S1 Clear Spot
• x2 S1 Clear Wide Cornering
• x2 Fog Pocket Brackets
• x2 Adapters
• x2 Wiring Splitters
• x1 Wiring Harness

S8 Bumper Kit

Baja Designs’ GMC 2500 and 3500 (2020-On) bumper kits were designed specifically to keep a low profile while allowing maximum performance. The kit includes mounts that fit directly into your truck’s factory locations without cutting or trimming and includes both the wiring and a 20″ S8 Driving / Combo for an easy install. With the S8 package, you will be able to utilize its backlit feature to have your ride stand out among the rest. 

Lumens: 19,050 Utilizing 24 Cree LEDs 
Wattage/Amps: 180W / 12A 
Dimensions: 30” x 3” x 1.6” 
Weight: 6.5 lbs 
LED Life Expectancy: 49,930 Hours 
Front Lens: Hard Coated Polycarbonate 
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize 
Bezel: Billet Machined Aluminum 

Includes:

• S8 30″ Driving Combo
• Wiring
• Hardware
• Brackets

S8 Behind-the-Grille Kit

This is a turn-key solution for anyone interested in serious lighting performance with added styling. This Dual S8 behind-the-grill kit will provide you with over 38,000 lumens and an amber backlit feature without any cutting or drilling needed! This kit comes with a wiring harness, 3-pin splitter, and amber backlit fuse tap kit. This combination will enable drivers to tap into their truck’s ignition, which will automatically trigger the amber backlit LEDs. This attractive safety feature is aesthetically pleasing and also draws minimal amps and keeps you visible while out on the trails. 

Lumens: 19,050 Utilizing 24 Cree LEDs 
Wattage/Amps: 180W / 12A 
Dimensions: 30” x 3” x 1.6” 
Weight: 6.5 lbs 
LED Life Expectancy: 49,930 Hours 
Front Lens: Hard Coated Polycarbonate 
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize 
Bezel: Billet Machined Aluminum 

Includes:

• x2 S8 30″ Driving Combo
• Wiring
• Hardware
• Brackets

S2 Reverse Light Kit

Looking to get dust lights or reverse lights for your 2020-On GMC 2500 or 3500 truck? Baja Designs has you covered with its newest reverse light kit. The complete package includes the lights, brackets, and necessary wiring harness making it a breeze to get a rear-facing light setup on your GMC in no time.

Lumens: 1,130 Utilizing 2 LEDs
Wattage/Amps: 12W / .9A
Dimensions: 2.93″ x 1.76″ x 1.68″
Weight: 8 ounces
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Hard Anodized & Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum

Includes:

• x2 S2 Sport LED Light
• x2 Mounting Bracket
• x1 55″ Wiring Harness Splitter
• x1 Wiring Harness
• All necessary hardware

If you have any questions about Baja Designs, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at [email protected].