The new SpeedStrap innovative UTV Tire Bonnet Kits will keep your vehicle secure on the trailer and give you the peace of mind you deserve. Each bonnet wraps around and over the vehicle’s tire, to keep the wheel grounded to the trailer. Unlike other tire bonnets on the market that can only fit a certain size tire, the SpeedStrap Tire Bonnets use an innovative design that tugs in against the tire when pulled tight.

The top strap has 3 size slots, so it can adjust to fit approximately 26″-36″ size tires. On most trailers, it is quite rare to have anchor points that are set perfectly on either side of the tires (unless you have E-Track). So, SpeedStrap sought out to alleviate this issue and made the front strap of its tire bonnet longer and more adjustable; this way, that you can reach more anchor points on your trailer with ease.

Rated at a 1,300-pound Safe Working Load (SWL) and a 4,000-pound Maximum Rated Capacity (MRC), these 1.5″ tie-downs are built with the highest quality and to the highest standards. Each premium ratchet mechanism features the SpeedStrap signature, wide handle, comfort grip, and protective end caps on the barrels to protect your rig. In fact, these are likely to be the last tie-downs that you will ever need!

View All SpeedStrap Products Here

Why Use Tire Bonnets? Regular tie-downs that connect to the frame or bumper are not always the best way to secure your vehicle. As you drive, the vehicle will still float up and down on the suspension, which can cause any tie-downs to loosen up and tighten as the vehicle moves. The best solution to this is to directly attach them to the tires because they virtually have no movement as they are grounded to the trailer. SpeedStrap’s Tire Bonnet Kits run around the sides and over the top of the tire in order to keep the vehicle securely grounded for the duration of your ride while still naturally floating on its suspension.

Through the Wheel Tie-Downs: These straps are another great way to lock the wheels down to the trailer. Simply take the strap end of the tie-down and run it through the wheel. Then, feed it through the D-Ring and back into the ratchet barrel. Pull tight and ratchet the tire down tight to your trailer. The tie-down creates a loop that tightens against the wheel and can fit pretty much any size tire. Since you are only running the strap webbing through the wheel, it can work with almost any style of spokes (unlike a metal hook which may not fit and can scratch your wheel).

Features:

• Tire-Bonnets run around the sides and over the top of the tire
• Keeps the vehicle secure and grounded for the duration of your journey
• Allows the UTV to still naturally float on its suspension
• Innovative design that sucks in against the tire when pulled tight
• High-quality 1.5-inch tie-downs wrap inside the wheel and run to the trailer
• Adjustable to fit approx 26″-36″ size tire
• Rated at 4,000lbs MRC
• Assembled in the USA

Learn More and Purchase the Ultimate UTV Tire Bonnet Kit Here. 

Kit Includes: 

• 2 UTV Tire Bonnets – Use these to secure either the front or rear wheels of your UTV. 
• 2 UTV Through the Wheel Tie-Downs – Runs through the wheel, through the D-Ring, and then secures to the trailer.
• 4 SpeedWraps – These double-sided hook n’ loop straps are perfect for securing any loose straps from flying in the wind. They’re also great for wrapping around the ratchets when stored, to keep everything neat and tidy.
• 1 Large Tool Bag – Keep your belongings neat and organized

Download: Tire-Bonnet Instructions 

If you have any questions about SpeedStrap or its products, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at [email protected].