McLaren makes some of the best road legal cars available. They’ve taken all of their years of racing experience and used it in their supercars. Many people who get the chance to drive a McLaren think that they’re perfect completely stock. If you put a hardcore enthusiast behind the wheel, however, they will see small improvements that could be made.
One area that the McLaren 12C and 650S need improvement is the obnoxiously large wheel gap. Agency Power also noticed this problem and teamed up with industry expert Swift Springs to develop a set of lowering springs for the 12C and 650S. These springs were intentionally tuned to handle and ride very similar to stock, but get rid of that massive wheel gap. The spring rates are 6.5kg/mm which is extremely close to the factory spring rate.
With these springs from Agency Power, you can expect your McLaren to be lowered by 1” in the front and 0.75” in the rear. This closes up the factory wheel gap perfectly and looks absolutely killer with the factory 19/20” wheel set up. This set up will look even better on a set of aftermarket wheels with a slightly more aggressive offset. Best of all, these springs are designed to work with the factory lift system so you won’t have to worry about being too low to get over speed bumps.
If you’ve been looking for a cost-effective way to lower your McLaren without losing the factory lift system, then the Agency Power lowering springs are perfect for you. These springs are currently in stock and ready to ship here at Vivid Racing. Call to get your set before they’re all gone.
- Engineered by Swift Springs
- Rides like stock
- Lowers the front by 1″
- Lowers the rear by 0.75″
- Powder coated for durability
- Works with the stock lift system
If you have any questions about the Agency Power Lowering Springs for McLaren 12C/650S or would like to purchase a set, please do not hesitate to contact us. We can be reached by phone at 1.480.966.3040 or via email at [email protected].
