The Ford Focus ST has been under the knife since January 2013 and we definitely have a lot to show for it. With a cumulation of performance parts including the intercooler, exhaust, intake, and more from from Agency Power, we have also had the opportunity to build this entire aero kit enhancement out of carbon fiber. The Focus ST in its normal off the shelf look is not a bad looking car. But it just seems to skinny for such a hot hatch. With a majority of us relating to the rally cars of WRC, this Focus really needed more of a squat than a stance. With our own in-house composite department (aka the meth lab), we created these parts taking queues from many different rally car photos of the past couple decades. The hard line fenders are designed to accompany a 10.5 inch wide wheel like these Work Wheels Meister with Toyo Tires we have on. The bottoms of the fenders have a hard straight edge similar to the Ford Fiesta R2 rally car (seen here). The monster carbon fiber grill serves both a function and form. It definitely helps give more airflow to the larger intercooler while hiding the factory bumper beam. Giving it a larger mouth was influenced from Brian Deegan’s Ford Fiesta rally car (seen here). The front center lip was a simple add-on to help curve out the front bumper. But the side carbon fiber wind splitters really help bring out the width of the cars new stance. Finally the rear diffuser is a kick to the Focus RS of Europe (seen here). Instead of building a complete rear apron, we wanted to build a add-on part which also gave the empty rear end some more aerodynamics.
This is just one photoshoot of many to come. Don’t worry Vivid Racing Video fans, we will have something for you too! Interested in these aero parts for your car? Well they can be had, but they will cost you a bit. Making them in-house is not cheap. We are sending these parts out to be made in production but we anticipate 90 days before we see parts. You can always contact our Ford Focus ST specialist at 1.480.966.3040 x228 for more information. Photos by Cody Gephart.
View all our Ford Focus ST Parts Here
Current mod list:
Work Wheels Meister S1R 18×10.5 +15mm 5×108
Toyo Tires 265/35/18
Agency Power Carbon Fiber Aero Trim
Agency Power Catback Exhaust with Tri Tip
Agency Power Carbon Fiber Radiator Shroud
Agency Power Intercooler Piping
Agency Power Intercooler Charge Pipe
Agency Power Bolt-in Harness Bar
Agency Power Lower Engine Mount
Agency Power Crank Pulley
I prefer the black niche wheels… what is the release date? And how much is the wide body kit? I think your final touch should add a rear spoiler to the kit
Hey Rob,
The Focus will be debuting at SEMA in the toyo tires booth. We have intentions of a rear spoiler, but it will not be debuted at SEMA. Thanks for the comment.
VR
Will you guys have the 5×108 works and Niche’s up on vivid racing for purchase. Our pattern is crap 🙁 no one makes wheels for us
The work wheels pictured are available to purchase used with tires after SEMA. Email dan at vividracing.com for pricing. Niche wheels and any 3pc wheel we can custom drill for 5×108. Will work on getting more info on the site, but contact us as there is a lot available.
What is the torque and HP figures?
Got a bunch of dyno sheets on each level of testing here if you scroll down https://www.vividracing.com/blog/gallery/?album=522&gallery=590