Mitsubishi Lancer Evolution X is the fastest and most extreme vehicle Mitsubishi sells. This is the final generation of the Lancer Evolution, a sports sedan produced by Japanese manufacturer Mitsubishi Motors. The Lancer Evo X was possibly a bigger step on from its predecessor than any other model in the Mitsubishi Lancer Evolution series. This car has a storming performance, practicability, reliability, sophisticated features and it offers comfort and safety.
For the first time, there was an entirely new engine, with the internal code 4B11T. Like previous Evos, the unit was still a 2-liter, turbocharged inline-four, but the cylinder block was cast aluminum rather than cast iron. It was 12kg lighter, as a result, used a timing chain rather than a belt, and featured MIVEC valve timing for both intake and exhaust valves, rather than just the intake. Many car enthusiasts complain about how ‘not fast’ this car sounds with the stock exhaust, the reason for that is, the stock exhaust is quiet.
With exhaust modification, you will give your car that powerful sound and the feeling of how fast your car is. The aftermarket exhaust will also be sure to increase your EVO X performance by allowing better gas flow and due to their lightweight, they lead to better acceleration and handling. If you are on a hunt for Mitsubishi EVO X aftermarket exhausts check out these top 5 in this article; or visit our shop to buy any that you like below.
Visit Our Shop to Buy Mitsubishi EVO X Exhausts Here
1. HKS Hi-Power SPEC-L2
Since its beginning, HKS has been committed to providing well-integrated, reliable, and environmentally sound performance systems. HKS has designed the High Power Exhaust for specific vehicle models to optimize the straightest flow pipe according to vehicle. This optimized piping for each vehicle ensures the straightest flowing piping possible. Once you upgrade to this exhaust, you will get to enjoy the full sound of the engine with increased piping diameter, up to 3.5 inches.
Features:
- The weight of this stainless steel SPEC-L is only 9.2kg which is 54% less than the 20kg stock exhaust system
- This lightweight system is realized through careful reduction of weight in each component such as pipe and silencer rather than just removing sound-reducing materials
- New series features a titanium tail tip cover instead of carbon
2. Invidia Racing Catback Exhaust
Catback exhausts are one of the most popular mods amongst casual and hardcore automotive enthusiasts alike. Their affordability, increase in performance, improved sound, and ease of installation make catback exhaust systems a perfect modification for nearly any vehicle.
Invidia is best-known for its high-quality exhaust systems. With Invidia, you get exhaust products and catback exhaust systems that can increase the performance of your car at an affordable price. Using only the highest quality materials Invidia manufactures components that improve performance while remaining stylish. Invidia manufactures its exhaust systems specifically for each application to guarantee precise fitment and power gains.
Invidia catback exhaust systems are designed specifically to improve performance, they achieve this by reducing bends in the exhaust system, using larger diameter piping. The reduced restriction also gives your vehicle a more aggressive tone for the sports enthusiast to enjoy. This improves throttle response, torque, horsepower, and the overall driving experience.
Features:
- Pipe Diameter: 80mm
- Polished finish
- TIG-welded
- CNC machined flanges
- Improves horsepower and torque
3. Takeda 3″ – 2-1/2″ 304 Stainless Catback Exhaust System
Takeda is a division of aFe (Advanced FLOW Engineering) which was founded in 2008, that manufactures high-performance products, like intakes and exhausts, for a wide array of models. aFe leads the automotive aftermarket world when it comes to filtration, air intake, and exhaust systems, as well as other bolt-on performance parts for everything.
Takeda’s stainless steel catback exhaust systems deliver increased exhaust flow and, consequently, more horsepower and torque. In addition, the system has been designed to use a vehicle’s factory hanger locations and comes with everything needed for a hassle-free installation. With this system, you will achieve performance gains of up to +17 HP and +20 lbs. x ft. torque with this exhaust system.
Features:
- In-house dyno testing resulted in gains of up to +17 HP and +20 lbs. x ft. torque
- 3″ – dual 2-1/2″ mandrel-bent, brushed finish 304 stainless steel for performance and lasting good looks
- Dual free-flowing 304 stainless steel mufflers deliver a deep, powerful tone
- Dual 4″ rear exit blue flame stainless steel tips give a unique, custom appearance
- 100% hand TIG-welded for strength and durability
4. ETS 08-16 Mitsubishi Evolution X V3 Extreme Exhaust
This is one of the loudest exhaust systems on the market and it was designed for the true enthusiast looking for maximum performance with no mufflers or restrictions. The exhaust system features a 3.0″ mid-pipe that tucks up tightly against the underside of the vehicle giving you more ground clearance than any other exhaust on the market.
The mid-pipe connects to the rear section using a 3.0″ v-band connection. The v-band connection provides a leak-free seal and allows for a quick change race pipe for the drag strip. Each tip is centered perfectly in the bumper opening.
Features:
- 22 lbs
- 3″ V-Band
- No Mufflers
- 4.5″ Brushed Single Wall Stainless Tips
- 100% Stainless Steel Design
5. ARK DT-S Stainless Catback Exhaust
ARK Performance is a premium aerodynamics, exhaust, and suspension manufacturer founded more than 15 years ago that focuses on top-notch workmanship and performance results. With the many varieties of exhausts that ARK has to offer, the DT-Series premium exhaust provides the perfect combination of sound, style, and performance.
The DT-S exhaust is designed with tone control and multi-layer sound compression materials to provide the perfect pitch you are seeking. This exhaust not only provides great tone; but also is dyno proven to maximize performance and engine response ensuring 100% satisfaction. With T304 Stainless steel, quality mandrel bends, and flawless welds, the quality of the DT-S exhaust is unrivaled.
Features:
- All Bolt-on System
- 4.5″ Polished Tips
- SUS304 Stainless Steel Construction
- Fully Polished Finish Piping
- CNC Machined Flanges
- 3.0″ OD Pipe Diameter
