Taking a step closer to the modern era, Toyota released the Tacoma which featured rounded body lines. With more trucks taking on a futuristic approach to the styling the Tacoma hit right at home for many enthusiasts.
After some time, owners began to realize there was hidden power waiting to be unlocked. By simply installing a larger intake, owners experienced decent power gains along with lower intake air temperatures.
#1 HPS Silicone Air Intake Tube Post MAF
HPS developed an ingenious air intake tube that installs just after the MAF sensor. The purpose of the intake tube is to provide a larger diameter pipe which results in a higher volume able to be taken into the intake. With increased volume past the MAF sensor, the engine can breathe efficiently without having restrictions right before the throttle body.
The silicone construction is offered in black, red, or blue to add a sense of style to the engine bay or maintain a factory look. Silicone also improves heat dissipation to bring the intake air temperature (IAT) down significantly. With the decreased IAT, the 3.5L V6 under the hood can now breathe freely without restriction.
Dyno proven results validate the 11 HP and 13 lbs/ft of torque gain with the HPS silicone post-MAF intake tube. The power gain was achieved thanks to the increased tubing diameter and reduction in IAT. Silicone is heat resistant which makes a great substitution for the factory intake tubing as it significantly brings down IAT’s and reduces the chance of heat soak.
Buy Your HPS Silicone Air Intake Tube Post MAF Here!
#2 Injen EVOLUTION Cold Air Intake System
Delivering the coldest air possible to the engine not only increases power but improves gas mileage as well. Installing the Injen EVOLUTION cold air intake system delivers more power, increased fuel economy, along with an improvement to the overall tone of the engine. The factory-like construction of the Injen intake makes for easy installation with extra improvements.
Simply installing a cold air intake, in general, is always beneficial to the Tacoma, but what makes the Injen cold air intake stand out is the snorkel like protrusion coming from the airbox. The protrusion routes to the front of the vehicle feeding the engine the coldest and densest air possible.
The roto-molded construction deflects heat and provides a factory fit and finish. Although the exterior of the tubing is rough, the inside is smooth which allows the air to transition through the intake with little to no turbulence. All hardware necessary for install is included with the Injen EVOLUTION cold air intake along with a high-quality air filter.
A reusable 8-layer oiled cotton gauze air filter provides exceptional filtration of any foreign debris. Dust, dirt, pollen, or bugs are no match for the Injen air filter included with the EVOLUTION cold air intake. A small window is built-in behind the Injen logo to view the state of the air filter and whether it needs to be cleaned or not. Cleaning the filter is made easy with the filter cleaning solution that can be purchase separately.
Click Here To Purchase Your Injen EVOLUTION Cold Air Intake System
#3 aFe Momentum GT Cold Air Intake Performance Package
aFe provides the ultimate cold air intake performance package on the market currently. When it comes to performance, it runs in aFe’s blood and DNA which is expressed through the Momentum GT cold air intake performance package. Included with the performance package are a throttle body spacer, cold air intake system, two air filters, a dynamic air scoop, a pre-filter, and a filter restoration kit.
The throttle body spacer is stalled between the throttle body and the intake plenum. With helical grooves on the intake port, the air is accelerated and spun while entering the intake. The spiral effect results in improved fuel efficiency, throttle response, and better mid-range torque. Everything needed for installation is included in the package.
Being that this is a sealed intake, with the included dynamic air scoop nothing but the coldest air is directed to the engine. The included air filters are 100% washable and reusable after a long off-roading trip or a brutal monsoon season. For those extra dusty drives, a pre-filter is included to prevent any smaller dust particles from getting through the air filter.
Also included with the performance package is a filter restoration kit to bring your filters back to life. Have no fear of waiting the dreaded 24 hours for your filter to dry as there is a second filter included in the kit. When one filter gets dirty just swap it out and clean the spare at your leisure. Everything aFe provides is dyno tested and real-world tested to ensure a high-quality product that you can depend on.
Learn More and Purchase Your aFe Momentum GT Cold Air Intake Performance Package Here
#4 aFe Momentum GT Pro Dry S Cold Air Intake
For those looking for a simple cold air intake system that not only gets the job done but exceeds expectations, the aFe Momentum GT Pro intake system is the one for you. Offering a simple installation that requires minimal effort and no modification while increasing power output is easily achieved thanks to this intake system.
Incorporating into the factory fender ducting, the aFe Momentum GT intake features many other benefits to increase the performance output. A velocity increasing tubing design speeds up the air as it enters the intake system before the throttle body. The extra air velocity results in a massive gain in power and torque output.
Dissipating heat is achieved thanks to the roto-molded construction that offers a factory fit and finish. Giving off a slight aggressive induction noise, the aFe Momentum GT intake system has a factory characteristic while significantly increasing performance and efficiency. Be sure to purchase yours today!
Buy Your aFe Momentum GT Pro Dry S Intake Here!
#5 Spectre Cold Air Intake
For owners that are seeking an increase in horsepower along with the sound aggression of your engine, the Spectre cold air intake is the perfect solution. Offering an inexpensive cold air intake option, Spectre has been developing intake systems for quite some time. When it comes to engineering a quality intake the Spectre cold air intake is a simple component that not only increases the power output but also gives the engine an aggressive growl.
Simply replacing the factory intake, the Spectre cold air intake provides an OE fitment without the need for modification. The heat shield included prevents the surrounding hot engine bay air from entering the intake. Foreign debris is also filtered incredibly well with the included red Spectre air filter that provides maximum filtration.
The non-woven synthetic filter media offers exceptional filtration without restricting the airflow. Most aftermarket intake systems restrict airflow through the intake due to the air filter having too much media packed in the filter. Replacing the factory air filter with a Spectre variant alone can improve power slightly while saving the environment being that the filters are reusable and can be cleaned.
Spectre provides many intakes for different engine configurations or even just a simple filter replacement. The high-quality construction of each product gives owners ease of installation while increasing the power output significantly.
