When it comes to improving the performance of the F80 M3 and F82/F83 M4, many owners found that the intake was restricting most of its power. While the intake itself seems to be big enough, it is not permitting enough air to enter the engine which results in a loss of power. The factory intake also picks up a decent amount of engine bay heat causing heat soak over time further reducing power output.
#1 aFe Magnum FORCE Stage-2 Cold Air Intake System
To carry the most air possible to the S55 engine in the M3 and M4, the tubing diameter isn’t always the solution. While increasing the diameter of the tubing does assist in producing more power, many times the filter can also allow more power. The aFe Magnum FORCE Stage-2 cold air intake increases the tubing diameter while better improving the filter technology that is provided with the intake system.
The six-inch tall conical filters provided feature an oil-free, synthetic, filter media with a progressive layering to capture the finest dirt particles. Efficiently preventing dirt, dust, and debris from entering the intake tract is the main function of the Pro DRY S media without sacrificing a free-flowing design. The filtration offered with the Pro DRY S media allows for extended filter service intervals.
With data to back up their product, the aFe Magnum FORCE Stage-2 intake system flows up to 765CFM for maximum volume. The improved airflow results in a dyno-proven 19HP and 17 lbs/ft of torque increase while outflowing the factory intake by 32%. The intake ducting seals against the hood when closed to ensure a sealed system feeding air from the coldest point of the vehicle.
To make an easy installation, the aFe Magnum FORCE Stage-2 intake requires little hardware to function properly. Swapping filters is easy thanks to the filter-to-housing interface which allows owners to quickly change their filter with minimal tools. Brushed aluminum accents are strewn throughout the intake to offer a sense of performance and display the aFe Magnum FORCE logo.
Features:
- Dyno-Proven Gains up to +19 HP & +17 Lbs. x Ft. TQ
- Outflows Factory Intake by 32%
- Measured Flow: 765 CFM @ 7″ H2O
- Open-Element Design Allows For Viewing of the Air Filters, Yet Seals When Hood is Closed to Keep Out Hot Air
- Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
- Brushed Aluminum Accent on Intake Tube Makes for a Unique Look Under the Hood
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
Buy Your aFe Magnum FORCE Stage-2 Intake Here
#2 Eventuri Carbon Fiber Cold Air Intake Kit with Sealed Ducts
Eventuri has been bringing style, performance, and excellence to the aftermarket community for some time. The carbon fiber cold air intake kit with sealed ducts for the BMW F80 M3 and F82/F83 M4 is one of the many glorious products they have brought to the market. Fully constructed of beautiful pre-preg carbon fiber, the Eventuri cold air intake compliments the S55 in every way possible.
The carbon fiber construction offers elegant styling within the engine bay and matches the carbon fiber bracing. Not only does the carbon offer incredible aesthetics, but also significantly increases performance. The Eventuri intake features a Venturi effect which increases flow towards the turbochargers. A wide opening funneling down to a smaller diameter accelerates the air with increased volume resulting in higher power output.
Deflecting heat in the engine bay is the number one goal of any intake, as hot air means less power. Eventuri prevents heat soak thanks to the carbon fiber tubing which disperses heat quickly to allow the coldest air possible to enter the engine. Further improving airflow and intake air temperature, sealed carbon fiber scoops are provided with the Eventuri intake system.
The scoops install behind the grille of the M3 and M4 to direct the coldest air possible through the intake tract. Once it enters the intake tract, the air is accelerated towards the engine due to the conical velocity increasing the design of the filter and filter housing. Laser-cut brackets provide a precision fitment throughout the whole intake kit offering ease of installation. All hardware necessary is provided from Eventuri.
Features:
- Crafted from 100% prepreg Carbon Fiber
- Employs a Venturi effect to accelerate airflow whilst maintaining laminar conditions
- Designed to fit over the stock cold air ducting channels
- Designed to sit directly behind the front grills to capture as much air as possible and with a continuous curve to the duct opening to ensure this airflow is efficiently channeled
Package Includes:
- 2 Carbon Fiber Venturi housings
- 2 High Flow Gen 2 Filters
- 2 Aluminium Cowls for smooth airflow entry
- Left Side Carbon Tube with integrated MAF sensor mount
- Right Side Carbon Tube with integrated MAF sensor mount
- 2 Carbon Fiber Sealed Intake Ducts
- 2 Carbon Fiber Front Scoops
- Laser Cut Stainless Steel Brackets
- High quality Silicon couplers with BMW specification hose clamps
Find Our More and Purchase Your Eventuri Carbon Fiber Cold Air Intake
#3 Injen SP Short Ram Intake
The S55 engine could use a little bump in performance which is exactly what the Injen SP short ram intake does. Feeding the twin-turbochargers more air not only increases the power output but also allows the engine to obtain higher efficiency. Simply installing the Injen SP intake on your M3/M4 will result in a 20HP and 23 lbs/ft of torque increase.
Considering the factory intake is so restrictive, the Injen SP intake opens up airflow significantly. With dyno-proven results, the Injen SP short ram intake is the perfect solution for the owners looking for an inexpensive power increase. Power isn’t the only aspect enhanced by the Injen SP intake. Along with power, the induction noise of the S55 engine is amplified thanks to the solid aluminum construction.
With a black powder coat finish, the Injen SP intake has a sleek appearance within the engine bay of the M3 or M4. Maintaining air to fuel ratios is easily achieved with the factory placement of the mass airflow sensor placement. The free-flowing design allows for an increase in power, efficiency, and sound while efficiently filtering dirt and dust.
Injen provides its SuperNano-Web dry air filter with the SP short ram intake. The technology packed in the air filter alone proves that Injen knows a thing or two about making a high-quality intake. Increasing the surface area of the air filter allows more air to enter the intake which translates to more power in the long-run. The cleaning process of the SuperNano-Web filter media is made easy as there is no solution needed for cleaning.
Features:
- Direct fit for the2015-2018 BMW M3 (F82/83) L6-3.0L (tt)2015-2018 BMW M4 (F80) L6-3.0L (tt)
- Dyno Proven gains of up to 20 hp and 23 lb-ft. of torque
- Short Ram Air Intake Design
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number x-1081-BB
- Available in multiple finishes
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
Buy Your Injen SP Short Ram Intake Here!
#4 GruppeM Carbon Fiber Ram Air Intake System
When it comes to raw performance GruppeM has you covered with the carbon fiber intake. Encompassing an essence of true beauty, this intake improves much more than the power output. The elegant carbon fiber construction complements the factory carbon bracing in the engine bay. While aesthetics are wonderful, the ultimate feature of the GruppeM intake is the smooth transitions within the intake.
Having smooth intake tubing promotes airflow and prevents turbulence within the intake before it reaches the turbochargers. The carbon fiber construction alleviates high IATs due to the intake tubing being so close to the engine. Surrounding engine bay heat typically raises IATs, but thanks to the carbon fiber, heat is dissipated through the weaves within the intake.
Both air boxes intake air that is directed from the front of the vehicle meaning the coldest air possible is entering the engine. Colder air entering the intake results in lower IATs thanks to a denser molecule compound which also provides a stronger burn within the engine. The filters provided with the GruppeM intake system are conical K&N filters which further increase power by allowing the maximum amount of air to enter the system.
Features:
- K&N cone filter included with cold air intake kit
- Constructed of elegant carbon fiber
- Ultra-light design saves weight over factory intake
- Extremely durable construction to last ages
Learn More And Purchase Your GruppeM Carbon Fiber Intake
#5 Racing Dynamics Cold Air Intake
For those looking for an inexpensive solution to increase the power and performance of the S55, Racing Dynamics Cold Air Intake is the perfect option for you. Constructed of heavy-duty 6061 aluminum, Racing Dynamics developed this cold air intake to efficiently deliver free-flowing air to the engine without restriction.
The gentle bends to the piping allow for a maximum flow rate without restricting the airflow or creating turbulence. Non-turbulent air entering the engine results in higher performance gains along with efficiency. TIG welds surrounding the whole intake system provide exceptional durability and ensure longevity.
Features:
- Dual inverted filters for increased airflow and increased performance at higher speeds. Racing Dynamics inverted cone air filters have increased surface area by their design and provide for more intake air over standard air filters.
- Racing Dynamics pipes have been manufactured without cutting and welding of sections thereby providing a continuous smooth pipe interior.
- Pipes are made out of heavy-duty 6061 aluminum with a black powder-coated finish.
- Dual aluminum intake tubes come complete with precision machined MAF sensor mounts aircraft quality TIG welded on each of the intake pipes.
- Improves performance of approximately 10 HP and improves throttle response
- The intake system enhances the sound of your turbocharged engine
- Comes complete with a connector hose and hose clamps for an easy installation
- Racing Dynamics retain use of the OEM intake ducting and the bottom half of the OEM filter box as a non-heat conductive heat shield
