The Nissan R35 GTR demonstrates a blend of power and soul in a singular supercar package that can be enjoyed by all types of drivers. The GTR boasts advanced safety features to give you added confidence behind the wheel, and a driver-centric cabin to make it just as exciting inside as it is on the outside. Featuring an innovative all-wheel-drive system, the Nissan GTR delivers dynamic handling in all seasons. So, while most supercars stay in the garage or make a hasty retreat in pesky weather, the Nissan GTR powers through with ATTESA ET-S, one of the most advanced AWD and Vehicle Dynamic Control (VDC) systems ever used in a road car. That being said, some GTR owners seek to get even better handling from their cars by upgrading the stock suspension system.
Investing in lowering springs or coilovers can get rid of that annoying fender gap that comes from the factory and ruins the stunning lines of the GTR. On top of improving looks and exuding a more intimidating aesthetic, an aftermarket suspension system can lower the car’s center of gravity and the higher spring rates can deliver better overall handling. For the money, it’s hard to beat the performance and visual improvements gained by a lowering spring or coilover kit. These will have you going through curves faster with enhanced driving characteristics that inspire the confidence needed to truly drive the GTR like it was meant to be driven.
Vivid Racing carries a comprehensive inventory of suspension parts for the Nissan R35 GTR that will do all of the above. Whether you are merely driving on the streets or frequenting the track, the following 5 best lowering springs and Coilover kits can take your sports car to the ultimate level. Starting from the top with the most race-oriented kit to the last one that is more street-friendly, these kits will elevate your driving experience so you can completely enjoy the GTR for what it is. You can also shop all Nissan R35 GTR suspension products right here.
1. JRZ Suspension 11 Series Complete Coilover Kit
The JRZ damper design from JRZ Suspension is the result of 60 years of experience in the R&D of suspension parts for racing, rally, off-road, heavy-duty, and industrial applications. With that, JRZ Suspension is pleased to offer its new JRZ 11 Series double-adjustable motorsport damper. The complete 11 Series coilover kit for the Nissan R35 GTR is the embodiment of the brand’s damping philosophy to control unsprung mass. Damping is available over a large range with fine-tuning increments for a difference you can immediately feel. The setup is super simple and the characteristics of this system are totally customizable.
Compression and rebound are independently adjustable using this kit. The rebound is adjusted by orifices on the piston rod with a check valve so there is no crosstalk between the rebound adjustments and compression forces. The compression is adjusted by a blow-off valve in the canister which helps control unsprung mass to ensure greater control for the driver and a more settled ride over bumps and such. Sprung mass, on the other hand, is controlled with rebound damping, delivered smoothly via an 8060 motorsport piston.
The JRZ 11 Series rebound system and 8060 piston provides linear damping traits with smooth pressure development independent of compression forces. This allows the damper to transition between rebound and compression efficiently, maximizing grip and reducing tire wear. The combination of the 22mm shaft and the use of nitrogen pressure results in a lifting force created by the damper, which works together with the spring to deliver improved handling, higher comfort levels, and increased vehicle body stability.
Features:
- For professional on-track racing use
- Rebound adjustment independent from compression
- Fine yet noticeable change per click
- 14 clicks compression
- 24 clicks rebound
- High-volume canister
- Adjustable gas pressure
- Highest flow rate to piston
- Super lightweight construction
2. KW Clubsport 3-Way Kit with Top Mounts
The KW Clubsport 3-Way Kit with Top Mounts for the Nissan R35 GTR will deliver excellent handling, improved performance, increased agility, and fantastic lap times, guaranteed. That’s because KW Clubsport suspension kits are independently adjustable in compression and rebound forces and come with high-performance racing springs to meet all the needs for the road and track. These setups were specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, your vehicle’s suspension geometry can be altered to the requirements of the tires and the intended use. The adjustable top mounts coupled with the independently adjustable rebound and compression dampening technology help to set up adjustments according to factors like vehicle load, track conditions, and tire characteristics.
KW Clubsport 3-way adjustable coilovers were developed for customers who demand better handling for when they participate in track day events, but also require a setup that could be used for everyday driving. With the rebound adjustment, the R35 GTR can be tweaked to satisfy the demands of the driver; go from comfortable ride quality to a stiffer ride with improved road-holding characteristics. The compression adjustment takes place at the lower end of the shock absorber by a patented multi-purpose valve. The number of pre-adjustable parameters of this valve allows for a wide range of adjustments. Within the dampening range, the driving behavior of the car is strongly influenced and steering behavior is significantly improved. Adjustable top mounts are included with a special gasket system that prevents dirt and moisture from entering into the bearings, thus preventing corrosion and wear.
Features:
- Height-adjustable coilovers
- Performance setup for the racetrack
- Dampers in compression & rebound forces independently adjustable
- Use of high-performance linear race springs
- Made with inox-line stainless steel technology
- Additional available with racing top mounts
- TÜV approval for this specific application
- Front lowering range: 10-30 mm (0.4-1.2 inches)
- Rear lowering range: 15-35 mm (0.8-1.5 inches)
- Front spring rates 970 lbs/inch
- Rear spring rates: 515 lbs/inch
3. KW H.A.S. Coilover Spring Kit
KW Height Adjustable (H.A.S.) Coilover Springs are the easiest way to give your Nissan R35 GTR that sleek, lowered look without spending all the money needed for a full coilover kit. Instead, at a lowered price point, you get high-quality KW springs and threaded collars that work with your car’s OEM dampers to give you a sporty but comfortable ride that will improve your GTR’s handling and give it a more aggressive feel. Apart from enjoying a more controlled driving experience, this kit will also get rid of the pesky fender gap that comes from the factory.
For vehicles equipped with electronic dampers from the factory, these Height Adjustable Springs are, in some ways, even better than a complete coilover setup. That’s because you do not have to sacrifice any functionality in order to lower your car. That, combined with KW’s legendary quality and race heritage, gives you the peace of mind you deserve when modifying your ride. In addition, KW’s height-adjustable springs beat out conventional springs because you do not have to figure out or be immediately satisfied with a fixed lowering rate from the start. This kit lets you adjust the height when you want or need to even after it has been installed on the car.
The KW H.A.S. Coilover Kit not only gives your R35 a more dynamic appearance, but the steering behavior and response of the standard dampers become more agile. Best of all, any driver assistance systems on the car as well as the comfort features of an adaptive series suspension remain with this vehicle-specific developed spring setup. With their high-quality (surface) finish as well as the KW height adjuster, this KW height adjustable spring kit includes vehicle-specific bump stops with a dust protection system to safeguard your GTR’s standard suspension against wear and tear caused by salt and road spray.
Features:
- Individual height adjustment of the standard suspension kit
- Achieve 0.0-1.2 inches (0-30mm) lowered at front and rear
- Adaptive damper control remains active
- Vehicle-specific spring rates for the R35 GTR
- Better steering behavior and overall handling
- Lowered stance gives off an improved appearance
4. Swift Springs Sport Spec-R Springs
The Swift Spec-R Sport Springs for the Nissan R35 GTR will maintain the ride quality you get right from the factory, while adding improved handling and a lower ride height for driving enthusiasts and style-minded drivers who want only the best. From HPDE events to SCCA competition, Swift Spec-R Sport Springs are engineered for serious track-goers looking to take their ride to the ultimate level without sacrificing favorable driving characteristics. After all, Swift did not develop its Sport Springs lineup simply by dropping the ride height. Unlike other manufacturers whose primary focus is on styling, Swift approached these lowering springs with three goals in mind.
The first mission was to keep and improve a smooth, comfortable ride like you enjoy straight from the showroom floor. The second was to increase handling by minimizing body roll and squat in search of overall suspension balance. And, the last was to lower the car within the tolerance of the R35’s usable stroke. Keeping or improving a car’s comfort levels while increasing performance is not an easy task, especially since these two factors tend to conflict with each other. Swift Springs, however, decided to take on this challenge by creating their own material (H5S.TW) and unique manufacturing method that works very well together to achieve that goal. Working in unison, the special material and production process provides superior levels of comfort and handling so you can enjoy the best of both worlds on and off the track.
The Spec-R springs are wound using the same engineering tactics and material as the brand’s popular Sport Springs, but with stiffer spring rates and a small change in ride height. This kit features an increase in spring rate to enhance cornering speed through entry and exit to give you the added boost you need to take those turns with confidence. The increase in spring rate is based on the Nissan GTR’s specific factory stock valving settings for optimal performance. Track tested and tuned for heightened performance, this spring kit is aggressive yet comfortable enough for everyday driving.
Features:
- Spring Rate Front: 1117 lbs/inch
- Spring Rate Rear: 615 lbs/inch
- Front Lowering: -1 inch
- Rear Lowering: -1 inch
- Made for the track enthusiast
- Improved handling and looks
- Reduces body roll for more control
5. H&R Sport Springs
It is no secret that H&R builds some of the best-made and highest-performing springs in the industry, designed and manufactured to be stronger, more resilient, and more durable than the competition. If you are looking for a nice, aggressive stance on your Nissan GTR without sacrificing ride quality and spending thousands of dollars, then H&R Springs is a great choice. They are all engineered in Germany with the focus on optimal ride quality, improved handling, and a sportier ride height. Best of all, they work with your vehicle’s factory dampers. The stiffer springs will increase cornering stability, reduce body roll, and provide a much better driving experience overall in your R35 GTR. This system lets you lower the car by 0.75 inches at the front and the rear.
H&R Sport Springs offer the handling characteristics you want with the aggressive appearance you’ve been after, without the harsh ride associated with less-advanced spring systems on the market. With these, you will experience more control along with a comfortable ride made for the street and track alike. All H&R springs are ISO 9001 certified and made from a proprietary 54SiCr6 spring steel to guarantee premium quality and performance. This material has strength rated at 290,000 psi to deliver unmatched tensile strength and resiliency. For maximum durability as well as longevity, H&R springs are also precision shot-peened – a special process was developed to increase spring life by more than 200 percent.
Features:
- Crafted from a special 54SiCr6 spring steel
- Springs are strength rated at 290,000 psi
- Reduces perceived fender gap for a sportier look
- Ride quality is kept very close to stock ride comfort
- Fully compliant and well suited for the city streets
- Approx. Front Lowering (inch): 0.75
- Approx. Rear Lowering (inch): 0.75
