$309.95
Model #BK063
Free Shipping
Hurry Low Stock
Reduce wheelhop, bushing deflection, and rear cradle movement on your 2016-newer Chevrolet Camaro with a Rear Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machined Delrin, laser-cut stainless steel, and billet aluminum, the BMR BK063 Rear Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. The BK063 Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum “bullet” inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. Filling the voids in the bushings greatly reduces the deflection, which allows more power and torque to be transferred to the ground instead of being absorbed by the chassis.
BMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR’s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension’s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement.
Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn’t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection. Through the testing BMR has seen a 95% or greater reduction in vertical deflection in all testing situations. When performance is a must, rely on BMR Suspension! BMR Suspension’s BK063 Cradle Bushing Lockout Kit is available in black for long-lasting good looks. Installation time is 2-3 hours. Proudly made in the U.S.A.!
This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH.
Features:
WARNING: Cancer and Reproductive Harm
Make Vehicle | Model | Submodel | Year | Engine | Notes |
---|---|---|---|---|---|
2020 Chevrolet Camaro |
Camaro | 2020 |
|
||
2017-2020 Chevrolet Camaro LS |
Camaro | LS | 2017-2020 |
|
|
2016-2020 Chevrolet Camaro LT |
Camaro | LT | 2016-2020 |
|
|
2016-2019 Chevrolet Camaro RS |
Camaro | RS | 2016-2019 |
|
|
2018 Chevrolet Camaro RS Edicion Especial |
Camaro | RS Edicion Especial | 2018 |
|
|
2019 Chevrolet Camaro RS Fire Edition |
Camaro | RS Fire Edition | 2019 |
|
|
2016-2020 Chevrolet Camaro SS |
Camaro | SS | 2016-2020 |
|
|
2017-2020 Chevrolet Camaro ZL1 |
Camaro | ZL1 | 2017-2020 |
|
When it comes to upgrading cars, the first thing that comes into a driver’s mind is either the engine performance or how the vehicle looks. But what some new car enthusiasts do not know is that by upgrading your vehicle’s suspension, you can have both goals in one go. By upgrading your vehicle’s suspension, you can improve the way it handles, which means better turning capability, and improve its stance giving it a more aggressive look.
BMR Suspension is a brand you can trust when it comes to quality suspension products.
BMR Suspension is an aftermarket company that specializes in creating suspension parts for various American muscle cars. The company started in 1998 and has since provided enthusiasts with an affordable option for aftermarket suspension parts.
They may not be as old as some of the tenured suspension manufacturers in the world, but the company does not fall short when it comes to delivering quality products to its customers. Today, they have become the go-to brand for suspension upgrades and have a comprehensive list of parts for a wide range of vehicle applications.
BMR products are 100% made in the USA at their manufacturing facility in Tampa, Florida. They use high-quality Chromoly steel, which is strong and durable. These are the same materials used in the roll cages of race cars.
All of BMR’s products are fixture-welded to avoid any deformation, ensuring that all the end products are within specification. Since their manufacturing process is done in-house, the company is able to maintain its level of quality. Because of this, BMR Suspension has become one of the most go-to brands for enthusiasts who want the best.
BMR designs do not only look good on paper but produce actual performance gain. With dozens of project cars fitted with their product, all have shown remarkable improvement in terms of vehicle performance, may it be on the street-driven car or a full-blown drag car.
Your vehicle’s suspension plays a significant role in your car’s performance and should not be overlooked. Hence, it is a must that you upgrade your suspension.
For those who want to push their vehicle more, BMR is a company that can help you with it. BMR has got your every need covered with various suspension parts like control arms, links, bushings, and more. To know more about the company and what they can offer, visit Vivid Racing and check what the company has in store for you.