Carbing 60 Degree 0.6L 10mm Oil Catch Tank

CARBING oil catch tank is compact body (75mm x 135mm) easy to fit design. Both 10mm or 15mm bracket hole size models are available. CARBING oil catch tank interior design has oil separator. Longer inlet pipe improves oil-gas separation.

Drain bolt for easy oil dumping is one of the standard features for CARBING oil catch tank. It is also equipped with oil level gage.

Hoses are tough heat resistant, oil resistant and bend resistant bladed hose to accommodate use in high temperature Engine room.

Accessories:

• 1-meter Hose
• 2x band Hose
• Mounting bracket
• Blind plug

• Separator : This Separator separates blow by gas and sludge, carbon etc. unwanted contaminants inside Blow by gas line.
• Level Gage : You can Visually check Oil level inside tank.
• Oil Drain bolt : It is easy to drain oil by loosening the oil drain bolt.
• Make : OKUYAMA
• Model : General-purpose type
• Height : 130mm
• The diameter of the tank : 75mm
• The angle of the pipe : 60 degrees.
• The diameter of the hose (IN/OUT) :10mm/10mm
• Color: Aluminum(Aluminum made with Iodized finish).

• Please check your vehicle hose size for fitment.
• Avoid installing in the location where high temperature is present such as near exhaust manifold or turbo unit.
• Check the oil level inside Oil Catch tank periodically.
• Drain oil inside the tank if you find oil level above 1/2 the tank.