Tax Season '24 - Category
  See more parts for your Nissan GTR

Alcon Superkit 400x36mm Mono6 Front & Rear Brake Kit w/RS9-2 Pads Nissan GT-R R35 2009-2021

$15,745.00

Alcon

Model #BKC1759ZG01

Free Shipping


Shopper Award

Alcon Components LTD, a world-wide leader in high performance braking systems and technology, has released the GT-R Super kit to maximize the braking power of the Nissan R35 GT-R.

The Alcon GT-R Super Kit has the largest brake caliper, rotor, and pad upgrade available for the GT-R, with the front rotors having a massive 15.75” x 1.42” (400mm x 36mm) size, and the rear rotors coming in at 15.16” x 1.30” (385mm x 33mm.) The kit’s 2-piece floating rotors also include Alcon’s unique bobbin drive system and crescent groove pattern on the face along with 48 internal vanes with turbulators. The mammoth sized ‘Mono-block’ calipers are machined from solid billet and contain 6-pistons in both the front AND rear, along with dust seals, anti-rattle clips, ventilated piston inserts in the front, and utilization of the OEM parking brake in the rear. The brake pads included are Pagid RS9-2 models, with anti-squeal shims and a surface area of 33.6” square inches (217 square centimeters) in the front and 18.7” (121 sq cm) in the rear. High quality Goodridge stainless steel braided brake lines complete the kit. And, best of all, these huge brakes fit inside the OEM 20” wheels and work with the stock brake actuation system! While other expensive carbon-ceramic brake pads and rotors are good for dedicated race cars that have extreme brake temperatures all the time, they cannot match the initial bite and cold/warm stopping power of this Alcon Super Kit during normal and spirited driving conditions. This is due to the fact that carbon has to be extremely hot to work well, yet the Alcon Super Kit performs well when cold, warm, and hot.

Ultra-high resilience piston seals minimize piston retraction distance for negligible dead pedal travel, which means better pedal feel and a quicker reaction time. Differential piston bores optimize pad wear and movement by balancing forces with temperature gradients across the pad surface. Optimal opposed piston sizing allows for OEM piston matching for proper loading for the ABS pump cycle rates. The combination of the rotor casting process and Alcon;s unique alloy composition makes for better heat conduction and absorption. Alcon;s unique crescent slots provide gas relief and pad cleaning while minimizing the pedal pulsations normally associated with straight slotted rotors. The rotors floating pin bobbin drive setup allows for proper expansion during thermal loading, thus reducing rotor warping and noise. Under repetitive high-load use, the rotor will expand both on the radius and the width. A properly designed floating system will compensate for the necessary thermal expansion of the particular rotor and hat combination. Machining tolerances are essential in offering a package that does not "run out of float". Alcon headquarters is located in the United Kingdom. Their products are known and used world-wide due to their high quality and innovative design.

Alcon is a supplier for many manufacturers and racing organizations such as IRL IndyCar Series, NASCAR, Daytona Prototypes, Australian V8 Super Car Series, Grand Am, WRC, Trophy Truck Series, Bentley, Brabus, Citreon Sport, Jaguar, Land Rover, Raybestos, Audi Sport, and more. The images shown are courtesy of Maximus Racing.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2009-2021
Nissan GTR

About Alcon Kits

Alcon Kits is an independent authorized dealer of Alcon Specialist Brakes and Clutches. Alcon designs and manufactures ultra-high quality, low-volume brake, clutch, and other automotive components. It supplies brake kits, braking accessories, and maintenance parts to the automotive aftermarket. Alcon Kits carries brake kits for Audi, BMW, Chevrolet, Porsche, Mitsubishi, Nissan, Subaru, and many others! The company is owned and operated by MotoDelta Motorsports, who has been distributing parts and services to Midwest sports cars for over 40 years!

Who Is Alcon?

Alcon was established in 1983 by engineer and sports car racer John Moore. The company initially made brakes for Audi Sport’s Group B Quattro rally cars. Today, Alcon provides a comprehensive lineup of braking solutions for the top echelons of motorsport, all from its factory and headquarters in Tamworth, England. Alcon supplies its parts to customers all around the globe who demand the very best in the OEM, performance aftermarket, and motorsport sectors.

Alcon has been at the vanguard of motorsport braking for over three decades. Alcon maintains a world-renowned reputation for supplying some of the most prestigious marques including, Bentley, Brabus, Jaguar, and Audi, as well as some of the most extreme applications like the 900bhp/ton Ariel Atom 500 and the 225 mph Noble M600. No matter what you drive or what your needs are, Alcon knows exactly what you need to get to the top. With extensive know-how and laudable real-world experience, Alcon remains a leader in the aftermarket.

Alcon Is Trusted Worldwide

Motorsports teams all around the world are benefitting from Alcon brakes and now so can you, regardless of the level you are competing at. Alcon supplies race-winning technology to Formula 1 teams and ultimate stopping power for drivers like Sebastien Loeb to win seven World Rally Championship Driver’s titles. Alcon’s success stems from its extensive expertise, which is both learned and applied at the very pinnacle of the automotive industry: motorsports. The company’s latest involvements include some of the best teams in Global Rallycross, numerous teams in America’s off-road series, and all vehicles in the new Formula E series.

The same expertise that Alcon supplies to professionals is also available to owners who wish to upgrade their street cars for enhanced performance on the road and track. Alcon knows what winning takes and how to deliver it too. Its clients and their respective expectations are as wide-ranging as the products Alcon supplies. The only common factor remains the brand’s no-compromise approach to engineering excellence. From small brake-by-wire controllers for Formula E to brakes that can stop 35-ton armored vehicles, Alcon is the answer. 

Find Alcon Brakes at Vivid Racing

There is no better time than right now to upgrade your vehicle’s stopping ability. Vivid Racing carries a wide range of Alcon Kits and products, including slotted rotors, replacement rotors, and big brake kits for several different makes and models. If you have any fitment concerns or cannot find what you are looking for here, please contact our expert parts team at (480) 966-3040. We will help you find exactly what you need to deliver unmatched safety and stopping ability that is used in some of the most demanding applications worldwide.

Alcon Store | Alcon Big Brake Kits | Alcon Rotors | Alcon Slotted Rotors

Check out these other great products