Tax Season '24 - Category

Shop For Your Vehicle

Transmission Bushings



Replacement Transmission Bushing

Like many materials and components used in the transmission field, the word bushing can be identified by different names. Sliding bearings, plain bearings, sliding bearings, friction bearings, or solid bearings are all concepts used to define what many of us respond to as bushings.

Bushings, including bearings, have always been around earlier than vehicles and are used in different industries. The bushings are small, lightweight, have high load capacity, and are the cheapest type of bearing in use today. A bushing can serve as a bearing if placed into a frame or a bore to include a rotating shaft surface.

A linear bushing is usually pressed into a bore and offers protection for a shaft that passes forward (in / out). If the bushing is not pressed to match, the dowel or snap ring will keep it in place.

It is fair to assume that the primary reason we use bushings and bearings in transmissions is to minimize friction and wear and maintain the components' alignment. If we're speaking about a bearing or a bush, each has its benefits and drawbacks.

Why Bushing Instead of a Bearing?

  • Bushings are much less susceptible to shock loads or oscillations; bearings can build brinelling, resulting in race damage and eventually bearing and seal failure.
  • Bushings tend to be 50 percent lighter than similar needle bearings and 1/14th that of comparable ball bearings.
  • Bushings can accommodate much stronger misalignment of the shaft.
  • The bushing has a much greater region of contact than the bearing, spreading the load over a larger area.
  • Bearings are usually 100-400 percent more costly than bushings.

If you're looking for budget-priced results, Vivid Racing is here to answer all your questions about transmission bushings. We have all the specifications and parts that your car is looking for.

Bushings may be made of various materials, such as brass, stainless steel, rubber, cast iron, or nylon. The secret to the layout of the material depends on the type of use the bushing may undergo. Bushing material must protect and support the part from damage. This implies that it must be tough enough to keep the load but flexible sufficient to secure the shaft moving within it.

Transmission Bushing Materials

Steel Backed

It's also called the babbitt. These bushings give high fatigue resistance and load-bearing capability with surface quality conduct and corrosion resistance. It's a cheaper material than bronze, and it's remarkable service life. These consist of a steel tube for security and a babbitt placed into the tube.

Bronze

This is a very robust material that provides excellent service for low-speed, high-load, heavy-duty service. There are 17 multiple kinds of bronze materials currently in use.

Plastics/Nylon

Look for these in some wet implementations, such as shaft support in some transmissions and bushings in dry systems, such as transmission shift links. Popular fabrics include Teflon, Nylon, Bespel, and Urethane.

Cast Iron

These bushings are usually used to help a reinforced steel pipe. The friction coefficient is very low so that the cast iron "glazes over" during use leads to very little wear and a very great life.

Transmission Bushing Damage

Wear

It happens when the lubricating barrier breaks down, causing the shaft and the bushing to contact each other. If your bushing indicates an inappropriate score, this could be due to insufficient clearance between both the bushing and the shaft. Still, it is more probable to be attributable to a shortage of lube flow.

Pitting

This damage is usually caused by lubricant cavitation, but not by the sort of cavitation you're used to working within the transmission world. Lub cavitation happens when the oil film's density begins to break down, contributing to hot zones on the bushing.

Ground Wires

Like many other car grounds, the transmission of ground wires is essential to the running of the vehicle. Both power and ground links must be healthy and clear of unnecessary resistance to avoid a plethora of problems, including bushing failures.

Why Switch to Vivid Racing?

From fitment help from our in-house experts to shipping packages, we'll take care of you and your order every step of the way. We know how much of a financial investment you're making in a set of wheels or accessories and upgrades, and in return, we'll deliver service and product that is second to none.

At Vivid Racing, we love cars. Cars are our vice in life. We love the automotive community and love our customers who think like us.

Finding a perfect aftermarket product is not an easy job. We fully understand it, and we are here to help you find the best modifications for your car.

We specialize in double takes! Our passion, simply, is helping you to build the car you always dreamed of. Everyone has their favorite look, color, effect, and desires, and we are here to help you achieve your goal.

Vivid Racing ensures that they meet the customer's expectations regarding quality, size, and strength.

The company always provides quality aftermarket products for applications where you need speed and good looks, such as racing vehicles.

Vivid Racing carries high-performance parts for almost any need. Click these links to choose from our selection of Body Kits, Big Brake Kits, Seats, Custom Wheels and Tires, Engine Parts, Exhaust Parts, Intakes, Suspension, and Transmission Parts.

Buying from Vivid Racing is the best choice you can make. We back every part we sell with our guarantee of satisfaction.

Buy online or give one of our world-class sales professionals a call at 1-480-966-3040. If you don't see what you are looking for, Call Us.

We can help. Vivid Racing was voted #1 in customer service nationwide!

Hands-On Experience and Professionalism is what makes us the best.

LOOKING FOR OEM PARTS? We can help.
Are you tired of paying overly inflated prices that the dealers charge for their parts? Vivid Racing can save you up to 60% off the dealers' prices. Click here to visit our OEM PARTS STORE.