Pilot and Throwout Bearings



Performance Pilot and Throwout Bearings

There are some Pilot Bearing applications in automobile systems, but the primary application defines a bearing placed into the crankshaft's end. The Pilot Bearing with rollers, balls, or solid brass/bronze is used to balance and coordinate the engine crankshaft to the transmission's input shaft. Typically, they apply to cars where manual transmissions operate. A flexplate is the most commonly used alignment mechanism on automatic transmissions.

What is A Pilot Bearing?

The transmission's input shaft and the engine's crankshaft spin at varying speeds while the clutch is disengaged. This gap allows for the Pilot Bearing. That's why when the clutch pedal is totally depressed, and the clutch itself is completely detached, a defective pilot bearing produces the most sound or noise. It is situated near the center of the spindle or flywheel of the crankshaft.

A needle, roller, or ball bearings covered in oil may be the bearing form. Be cautious to prevent clogging up the clutch disk or the flywheel layer if the maker suggests applying bearing grease. Blended with lubrication, the pilot bushings are brass. Adding lubrication would improve friction with these soft metal style bushings. Test the advice of the automotive manufacturer before any lubrication is applied to a Pilot Bearing.

Faulty Pilot Bearing May Exhibit The Following:

  • No release
  • The transmission may pop out of gear
  • Vibration and Unnecessary Sound
  • Unexpected Transmission Failure

What To Do With A Faulty Pilot Bearing?

The Pilot Bearing does not require regular service, but it should be replaced when clutch replacement becomes needed. In certain situations, as transmission-mounting bolts detach, pilot bearings may rust unnecessarily. The input shaft of the transmission swings about rapidly as this occurs, which places abnormal pressure on the pilot bearing. If you find a pilot bearing or clutch malfunction, have a trained technician from Vivid Racing urgently look at it. Putting it off would escalate the matter.

What is a Throwout Bearing?

Objectively speaking, release bearing, as in clutch release bearing, is the right word for a throwout bearing. It's better to visualize what this part is and what it does when viewed in such terms.

In the sequence of parts that make up the clutch linkage from the pedal to the clutch framework within the transmission bell housing, the throwout bearing is the last component. It is a bearing, indicating that it enables a shifting surface and a static surface to connect. Much like wheel bearings allow the rotating wheel hub to travel around the non-moving spindle, the throwout bearing is the portion that is usually seen in modern models between the clutch pressure plate that turns while the engine is working and the non-moving clutch fork.

Even though a clutch can be operated, mechanical or hydraulic in a few diverse situations, the throwout bearing's purpose will be the same. It connects pieces that are running and non-moving. The throwout bearing consists of a foundation connected to the two's arrangement, the exterior shell that presses against the pressure plate, and the bearing's structure between the two.

Symptoms of A Bad Throwout Bearing

The throwout bearing is an essential product that can deliver a long life cycle of years. It is produced with a secured assembly of the bearing that does not need servicing or lubrication. If a bearing goes wrong, whenever the bearing rotates, you can hear scratching or rumbling noise.

In devices with an air gap between the pressure plate and the bearing, only when the clutch is pressed in, and the bearing is rotating can you hear the sounds. When you put your foot off the clutch pedal, the noise will go down. If the throwout bearing is faulty, you have no option but to replace it by eliminating the transmission. That's why it can cost a lot of money to repair a cheap component.

Find High-Quality Pilot and Throwout Bearings Only at Vivid Racing

From fitment help from our in-house experts to shipping packages, we'll take care of you and your order every step of the way. We know how much of a financial investment you're making in a set of wheels or accessories and upgrades, and in return, we'll deliver service and product that is second to none.

At Vivid Racing, we love cars. Cars are our vice in life. We love the automotive community and love our customers who think like us.

Finding a perfect aftermarket product is not an easy job. We fully understand it, and we are here to help you find the best modifications for your car.

We specialize in double takes! Our passion, simply, is helping you to build the car you always dreamed of. Everyone has their favorite look, color, effect, and desires, and we are here to help you achieve your goal.

Vivid Racing ensures that they meet the customer's expectations regarding quality, size, and strength.

The company always provides quality aftermarket products for applications where you need speed and good looks, such as racing vehicles.

Vivid Racing carries high-performance parts for almost any need. Click these links to choose from our selection of Body Kits, Big Brake Kits, Seats, Custom Wheels and Tires, Engine Parts, Exhaust Parts, Intakes, Suspension, and Transmission Parts.

Buying from Vivid Racing is the best choice you can make. We back every part we sell with our guarantee of satisfaction.

Buy online or give one of our world-class sales professionals a call at 1-480-966-3040. If you don't see what you are looking for, Call Us.

We can help. Vivid Racing was voted #1 in customer service nationwide!

Hands-On Experience and Professionalism is what makes us the best.

LOOKING FOR OEM PARTS? We can help.
Are you tired of paying overly inflated prices that the dealers charge for their parts? Vivid Racing can save you up to 60% off the dealers' prices. Click here to visit our OEM PARTS STORE.