All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time. The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA's brake pad backing plates are made from high quality steel that is resistant to wear. DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products). Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off. As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.
With more than 40 years of industry experience and know-how, DBA Rotors has become Australia’s most awarded manufacturer and a global leader in brake rotor development. Over the years, DBA has managed to consistently refine and deliver quality braking solutions for a wide range of vehicle applications. The company, with its thirst for innovation, is dedicated to continuous R&D and improvements in engineering.
DBA Rotors was founded in the 1970s, producing a single type of disc on a standard workshop lathe. Since its inception, the brand has proudly grown from a small local Australian manufacturer to a global supplier of disc rotors and pads. DBA distributes its products across Europe, Australia, The Middle East, Russia, Asia, the U.S., and everywhere in between. Its comprehensive lineup of direct replacement disc rotors and pads cater to street vehicles, 4x4s, SUVs, military and armored vehicles, track cars, and more! Its application range includes everything from performance upgrades to towing, off-roading, and motorsports. DBA rotors come in several different series and offer just the bite you want in your braking system.
Why Choose DBA Rotors?
DBA’s number one priority is safety and takes no short cuts when it comes to manufacturing disc brakes. Drivers all around the world trust DBA products for their consistency, reliability, and superior performance. In fact, DBA performance rotors have been used and proven successful on many race tracks around the world and in several motorsport categories. DBA is world-renowned for engineering discs that are far better to the generic and aftermarket counterparts. It sets the bar when it comes to quality, tolerances, premium materials, and manufacturing equipment that all come together to deliver the finest disc brake rotors on the market.
In addition to standard “direct replacement” rotors, DBA manufactures a wide range of enhanced performance products. These boast features such as slotting, cross drilling, top-grade materials, improved appearance, and, in the top-line series, a highly sophisticated two-piece design. DBA rotors also spotlight a patented “Kangaroo Paw” ventilation system that helps your braking system remain cool and strong. DBA’s Thermo Stability Profiling is optimized to improve the longevity of your brake pads. Thermo-Graphic heat paint on each DBA rotor changes color based on different temperature limits, so you can monitor your brake system with a quick glance.
Upgrade to DBA Rotors at Vivid Racing
If you are ready to take your vehicle’s braking system to the next level, look no further than DBA Rotors. Vivid Racing carries a large inventory of DBA braking products, including basic rotors, slotted rotors, drilled rotors, brake pads, and drilled and slotted rotors. Please do not hesitate to call our expert parts team at (480) 966-3040 with any questions you may have. We are here to make the purchase process a simple and enjoyable one.
Standard Communications Warranty against defects
IMPORTANT: THIS WARRANTY APPLIES TO ALL GOODS SOLD BY US ON OR AFTER 1 JANUARY 2016 AND REPLACES ANY PREVIOUS WARRANTIES EITHER WRITTEN OR ORAL IN RELATION TO SUCH GOODS.
This warranty against defects ("Warranty") is given by Disc Brakes Australia Pty Ltd ACN 000 346 814 ("We, Us, Our or DBA").
Coverage and further information
Warranty We warrant, to the original purchaser ("You") that Our goods will be free from manufacturing defects in materials and workmanship for 12 months or 20,000 kms (12,000 miles) from the date of purchase whichever occurs earlier ("Warranty Period"), provided that, subject to Our obligations under clause 2.3, We will at Our discretion either repair or replace goods where:
We are satisfied that the goods are defective
You provide proof of original purchase; and
Freight charges both ways are paid for by You; We accept no liability for loss or damage during transit. 2.2 Any repair or replacement during the Warranty Period will NOT renew or extend the Warranty specified in this clause from the original date of purchase.
Our goods come with consumer guarantees that cannot be excluded under The Australian Consumer Law; (Competition and Consumer Act 2010).
Notwithstanding the preceding clauses, Our liability in respect of a breach of a consumer guarantee, condition, warranty or other obligation made under this Warranty is limited, to the extent permissible by law, at Our option to:
To the extent permitted by law, all other warranties whether implied or otherwise, not set out in this Warranty are excluded and We are not liable in contract, tort (including, without limitation, negligence or breach of statutory duty) or otherwise to compensate You for:
We warrant that We will perform any Warranty services with reasonable care and skill and agree to investigate any complaint regarding Our services made in good faith. To the extent permitted by law, Our liability in relation to such services is limited to matters set out in clause 2.4(b) provided that We are satisfied that the complaint is justified.
To make a claim pursuant to this Warranty You must, before the end of the Warranty Period, contact the reseller, distributor or workshop from where You purchased the product and follow their warranty claim instructions. In the event that the reseller or repairer is no longer trading, please phone DBA on 1800 730 039.
Under The Australian Consumer Law, you are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
In the case of goods We supply;
The replacement of the goods or the supply of equivalent goods;
The repair of the goods;
The payment of the cost of repairing the goods or of acquiring equivalent goods;
The payment of the cost of having the goods repaired.
In the case of services We supply;
The supplying of the services again;
The cost of having the services supplied again.
Any additional costs or expenses;
Any loss of profit, revenue, business, contracts or anticipated savings;
Any loss or expense resulting from a claim by a third party; or
Any special, indirect or consequential loss or damage of any nature whatsoever caused by Our failure in complying with our obligations.
This Warranty is in addition to and does not limit, exclude or restrict your rights under the Competition and Consumer Act 2010 (Australia) or any other mandatory protection laws that may apply.
This limited warranty is the sole express warranty made with regard to this product and is made in lieu of all other warranties whether oral or written. All implied warranties including without limitation warranties of merchantability or fitness for a particular purpose shall be limited in duration to the duration of this warranty. Manufacturer shall have no liability for incidental or consequential damages whatsoever and in no event shall manufacturer be liable for any damages in excess of claimants purchase price for the product. 2.10 For products sold in the U.S., some states do not allow the exclusion or limitation of incidental or consequential damages, so one or more of the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
For products sold in countries other than Australia or the Americas local consumer laws may take precedence and not allow some of the limitations or exclusions indicated in this warranty. Contact your local DBA Distributor for Warranty Claims procedures relevant to your location.
This warranty will not apply in relation to:
Goods modified or altered in any way;
Defects and damage caused by use with nonstandard tools;
Repairs performed other than by an authorised mechanical or brake expert;
Defects or damage resulting from misuse, accident, chemical corrosion, abuse, impact or neglect;
Claims of comfort, noise, vibration or harsh riding characteristics;
Goods improperly installed or used in a manner contrary to the relevant instruction manual;
Goods where the serial number and/or part number on the product has been removed;
Where all associated components are not within recommended specification; or
The product that has been subjected to conditions beyond those for which it was intended, such as, but not limited to, being used in any form of motor sport, unlawful use, or use in a model for which it was not designed for.
DBA cannot be held responsible for fitment if not installed by a licensed motor mechanic or licensed brake specialist, wear and tear and lack of maintenance, including situations where DBA's product is used past the design limits.
THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED BEYOND THOSE STATED HEREIN, INCLUDING, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
For any inquiries relating to this Warranty Statement please email firstname.lastname@example.org
For customers in the Americas please email email@example.com
Motorsport warranty statement
DBA's warranty will NOT apply in relation to use of the product for any form of motorsport or speed trial.
Whilst DBA promotes some of its product for use in motor sport applications, DBA cannot warrant the product when used in any form of motor sport. Vehicle modifications by the consumer are out of our control and may affect the braking requirements for the vehicle and it is the responsibility of the owner to ensure vehicle safety in these applications.
This by no means detracts from the quality of the product DBA manufactures; it simply states that if the product is used in motor sport applications, DBA has no control on how or by whom the product is used.