$435.00
Model #DO-5102
The DevilsOwn Stage 2 Gasoline 2.5 Bar alcohol/water injection kit features a DevilsOwn 2nd Generation Water-Methanol Injection Controller. This kit is designed for 1 wire hook up to a 2.5 bar map sensor. Simply run a map sensor signal to the controller, wire it up to power, then to ground and finally the pump. You will then be able to increase your boost timing and most importantly, you will have more power. Another new feature of the 2nd Generation Digital Variable Controller is that you can hook up a float level sensor, or any other ground trigger, to one of the controller inputs and it will light up the multi-function LED thereby notifying you of your fluid levels.
The DevilsOwn Progressive Water Methanol Injection Kits main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point, by either a turbo or a supercharger. Compressed air is heated air that causes a reduction of power and detonation. DevilsOwn kits helps reduce power loss while also increasing fuel mileage. These kits are for applications where you desire the full control of your water injection needs.
Cool the compressed air with the DevilsOwn water methanol injection kit. Because water has a high latent heat content, it is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burning engines. Methanol, with its 116 octane high flash points and specific gravity, helps further reduce the chances of pre-detonation.
Water-Alcohol Injection Benefits:
Included in this kit:
Please Note:
WARNING: Cancer and Reproductive Harm
DevilsOwn is an aftermarket company that specializes in creating methanol/water injection systems for the automotive industry. They are a one-stop-shop when it comes to these systems. The company was founded in 2005 and has steadily grown to become one of the best companies in their field.
DevilsOwn has always made it a point that they produce the best products for their customers. Their ultimate goal is to provide products that exceed people’s expectations. They would rather have a product that overperforms rather than underperform.
The company has a wide range of selections when it comes to methanol/water injection systems. They offer parts such as nozzle holders, hoses, tank cap adapters, pumps, and other components required to complete a build. They have established themselves as the leading source of parts and are a one-stop-shop for those who seek to build this kind of system.
All their products are meticulously designed and engineered to perform in extreme conditions and provide maximum output. They ensure that their products are reliable and are not susceptible to premature corrosion.
If you want to further improve the performance of your vehicle and want to extract more power out of it, then it’s time to install a methanol/water injection system. When it comes to this system, one name stands out, and that is DevilsOwn. They were able to perfect their product with years of experience. Hence, more people are putting their trust in them. To know more about DevilsOwn, visit Vivid Racing and check out their list of products that would fit your specific need.