The DevilsOwn Stage 2 Gasoline alcohol/water injection kit features a DevilsOwn 2nd Generation Water-Methanol Injection Controller. This kit has a built in 30 psi boost port, which allows you to simply run a boost line to the controller. You simply run a boost line signal to the controller, wire it up to power, then to ground and finally the pump. You will then be able to increase your boost timing and most importantly, you will have more power. Another new feature of the 2nd Generation Digital Variable Controller is that you can hook up a float level sensor, or any other ground trigger, to one of the controller inputs and it will light up the multi-function LED thereby notifying you of your fluid levels.
The DevilsOwn Progressive Water Methanol Injection Kits main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point, by either a turbo or a supercharger. Compressed air is heated air that causes a reduction of power and detonation. DevilsOwn kits helps reduce power loss while also increasing fuel mileage. These kits are for applications where you desire the full control of your water injection needs.
Cool the compressed air with the DevilsOwn water methanol injection kit. Because water has a high latent heat content, it is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burning engines. Methanol, with its 116 octane high flash points and specific gravity, helps further reduce the chances of pre-detonation.
Water-Alcohol Injection Benefits:
Included in this kit:
- Increase horsepower safely by 10-15%
- Lower air temperatures by 50-200+ degrees
- Increases octane when you need it under boost.
- Reduces cylinder temperatures up to 300+ degrees
- No wear issues; only clean combustion chambers
- Allows you to safely run more boost and timing
- Completely adjustable digital progressive controller
- 300 psi pump with EPDM seals
- Heavy duty nickel plated check valve
- 15 ft of black high pressure nylon tubing
- 2 Micro droplet nozzles (DO3,DO7)
- Filtered self sealing tank tap
- Boost line, T-fitting and reducer
- All necessary hardware & Detailed Instructions
- Basic hand tools required for installation
- Proper tuning is required to achieve maximum results
- Typical install time is around 2-3 hours
1. Length of Warranty
The warranty term for new alcohol/water injection systems purchased from Devilsown Injection is one (1) years beginning on the date of the invoice
2. What is Covered
Devilsown Injection warrants that the products it sells are free from defects in materials and workmanship. This warranty also covers damage due to the shipping of products to you. This warranty does not cover damage due to external causes, including accident, abuse, misuse, acts of third parties, servicing not authorized by Devilsown Injection, usage not in accordance with instructions accompanying the product(s), failure to perform required preventive maintenance, including but not limited to cleaning filters, and problems caused by use of parts and components not supplied by Devilsown Injection.
3. Return Policy
Devilsown Injection will not accept any returns after thirty (30) days beginning on the date of the invoice unless Pre-Approved. For a return RMA you must contact Devilsown for approval. The item must be un-installed in the original box/packing, in new, unused condition. You must have your original receipt and must contact us within ten (10) days of receiving your item. All opened returns are subject to a twenty (20) percent re-stocking including the original shipping charge. If un-opened you are just responsible for the original shipping cost. You are responsible for shipping the item to us at your expense. No returns will be allowed if the return request exceeds 30 days from date of invoice.
4. Shipping Damage & Discrepancies
If you receive your order with incorrect or missing components, you must notify Devilsown Injection in the manner described above within seven (7) days of receipt. In the event of shipping damage, notify the shipping carrier immediately and request a damage report, and also notify Devilsown Injection in the manner described above.