See more parts for your Acura Integra

Driveshaft Shop Level 5.9 Axle and Hub Kit 1000HP Acura Integra Type R USDM 1997-2001

$2,194.49

Driveshaft Shop

Model #AC66

Help me decide

Shopper Award

Driveshaft Shop Level 5.9 Axle and Hub Kit 1000HP Acura Integra Type R USDM 97-01

This is the new level 5.9 axle/hub set similar to our Level 5 system but with a major upgrade, the inner cv. We now have created a Pro-Level Race worthy system that works with the standard spline size on the differential end, you can now use our system with Quaife and other aftermarket limited slip diffs and spools. What we have done is made a new ball & cage inner cv from high quality chromoly. This inner cv now has 6 contact points and is stronger than a Porsche 930 (108mm) cv (same cv used by many high dollar systems). This along with the 33 spline outer and 36 spline bars makes it the strongest set of axles to date. The Kit comes with both axles and a set of custom hubs that will fit the stock bearing sizes. The kits also come with long ARP studs. This system is designed for 1000WHP and tire size will not affect its strength. This system does not come with ABS Rings. The rings can be installed for an extra cost, call if need. Comes with 1 year warranty.

Note: 5 lug hubs/could use HO2727

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
1994, 1997-2001
Acura Integra

All axles and drive shafts covered under warranty by The DriveShaft shop are for repair only. We will not warranty any products that have been improperly installed, damaged, welded on, or modified in any way.

All returns must have a return authorization number issued by The DriveShaft Shop. Absolutely no exceptions.

Parts returned without an RMA number may be refused or charged additional handling fees.


Please understand the axles cannot be returned for any reason unless it is within the warranty period, or an incorrect part was sent. In the case of an incorrect part it is the installers sole responsibility to determine if the part is correct or not, if an incorrect part is installed and either damages the axles or any other parts, it is the sole responsibility of the installer and absolutely no repair under warranty will be given nor reimbursement for loss of time or monetary cost.

Level 0 axles have no warranty against breakage.
  1. Warranty for level 2 units are 6 months from date of purchase, axle is covered for repair only and only for the covered period. (Unless noted on invoice). DriveShaft shop and its distributors may not be held responsible in any way for loss of time, loss of money or reimbursement for damage caused by the products
  2. Warranty for Levels 2.9, 3, 3.9, 5, 5.9 and all drive shafts are 12 months from date of purchase. The axle or drive shaft is covered for repair only and only for the covered period (unless noted on invoice). DriveShaft shop and its distributors may not be held responsible in any way for loss of time, loss of money or reimbursement for damage caused by the products
  3. Absolutely no axle or drive shaft will be returned unless it is a new unit that has not been installed and is returned in original box with copy of original sales receipt and return authorization number. Returns are for credit only, NO EXCEPTIONS. Authorized returns are subject to a 10% restocking fee. Credits are for parts only and we do not refund shipping and handling charges on any returns.
  4. Ripped boots are not covered under the warranty; this is considered a road hazard and any damage caused by ripped boots will not be covered under the warranty.
  5. Axles purchased from The DriveShaft Shop or its distributors are covered for repair of the unit purchased only. These are performance products and should be installed by certified professionals, The DriveShaft shop and its distributors may not be held responsible for loss of money, time or inconvenience caused by the use of our products and by installing the unit you are agreeing to all of these terms and release The DriveShaft Shop and its distributors of any and all liability and waive the right to all and any law suit that may arise from the use of these products.
  6. Any custom made Axle or Drive shaft is non-refundable. We will do everything in our power to help make the part fit or work correctly, but there will be no returns or refunds on "custom" parts.
  7. Any aftermarket or custom drive train part attached to our axle/drive shaft will release "The Drive Shaft Shop" of any liability or warranty claim. There will be no exceptions to this.

Check out these other great products