Save up to 40% on VR Forged wheel sets! - Shop Now
Wheels - Affirm
  See all Engine products

Eagle Specialty Prod Forged 4340 Steel H-Beam Connecting Rods Single Rod 2.200in Journal .990in Pin Chrysler RB

$136.99

Eagle

Model #CRS7100C3DL19-1


Shopper Award

Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models?and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle make and engine application.

Features:

  • Quantity: Sold individually.
  • Connecting Rod Length Center to Center (in): 7.100 in.
  • Connecting Rod Beam Style: H-beam
  • Connecting Rod Material: Forged 4340 steel
  • Connecting Rod Finish: Shot-peened
  • Wrist Pin Style: Floating
  • Clearanced for Stroker: Yes
  • Cap Retention Style: Cap screw
  • Connecting Rod Bolt Brand: ARP
  • Connecting Rod Bolt Diameter: 7/16 in.
  • Connecting Rod Bolt Material: L19 alloy
  • Fastener Yield Strength (psi): 200,000 psi
  • Connecting Rod Bolt Head Style: 12-point
  • Approximate Connecting Rod Weight (g): 840
  • Rod Journal Diameter (in): 2.200 in.
  • Big End Bore Diameter (in): 2.3250 in.
  • Pin End Bore Diameter: 0.990 in.
  • Big End Width (in): 1.007 in.
  • Pin End Width (in): 1.125 in.
  • Advertised Horsepower Rating: 1,500 hp
  • Advertised RPM Rating: 10,000 rpm
  • Weight Matched Set: Yes
  • Remanufactured: No
  • Magnafluxed: Yes
Fitment:
  • Chrysler V8 7.0L/426 1963-1963 | Chrysler V8 7.2L/440 1966-1978 | Dodge V8 7.0L/426 1963-1965 | Dodge V8 7.2L/440 1966-1979 | Plymouth V8 7.0L/426 1963-1965 | Plymouth V8 7.2L/440 1966-1978
Note:
  • Block may need clearanced.

Other Part Numbers:
Eagle #eagCRS7100C3DL19-1

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Who is EAGLE?

EAGLE SPECIALTY PRODUCTS, aka EAGLE, has been at the forefront of developing top-quality engine components. The company officially started back in 1992 but has been developing their product for ten years prior.  Since the company started, it has continuously produced some of the market's best engine components and is widely used by engine builders worldwide.

Imitated But Not Duplicated

Due to the company's success, its products have been imitated by other companies even up to the part numbers. But the similarity ends only up to how they look. EAGLE uses the finest materials and has invested in the most state-of-the-art manufacturing machinery for them to create a product that would be able to take any punishment it is subjected to. It is tested to be superior to other brands and considered the best upgrade for OEM counterparts.

No To Shortcuts

The company sets the benchmark on how valves should be properly made. Using their years of experience creating rods, they have already designed over 200 different rods and 180 crankshafts. The company does not allow cost to compromise its material used, manufacturing process, and quality test. 

High-End Quality

All of Eagle's products are made up of high-quality materials. They use certified 4340 Chromoly steel. Using their own special heat treatment process, they are able to create a product that is much stronger compared to other competitors using the same raw material. 

They manufacture their rods using a 2-piece forging process that allows the rod to be stronger. This process orients the "grain" of the metal to the direction of the stress. Eagle uses a state-of-the-art Sunnen Krossgrinding system that allows them to create perfect cuts and bore consistently. 

Purchase EAGLE rods at Vivid Racing

If you want to upgrade your engine rods to something stronger and more reliable, then EAGLE is the brand for you. With their proven design and formula for creating rods, they have been sought after by top racing teams and engine builders. If they trust Eagle, so can you. Visit Vivid Racing and check out the list of parts specifically for your needs.

Check out these other great products