The special skills of Eibach engineers are in the tuning of the individual components (springs, dampers and stabilizers) to achieve the best possible harmony between the driver, the automobile and the road. As a driver you immediately feel more direct handling and greater predictability. Nose dive under braking is reduced, as well as excessive body roll in hard cornering. In any performance driving situation, tracking stability-and driver confidence-is greatly enhanced.
The entire process, from initial development to final shipping, is subject to a rigid Quality Control System that is certified by the highest EN ISO 9001 and QS9000 international quality standards. In fact, Eibach operates in accordance to its own, often more rigid, specifications. When you see the Eibach logo on a part, you can be sure that it is of the highest possible quality.
- Redesigned XT Barrel spring shape with increased suspension travel and linearity - will replace the XT Barrel counterparts
- Hi-Tensil Platinum Spring Coil Used
- Ultra-Lightweight for Reduced Unsprung Mass
- Each Spring Individually Tested
- Maximum Travel in Combination with Smallest Block Heights
- Length (in): 16.00
- Diameter (in): 2.50 I.D.
- Rate (lbs/in): 150
- Rate (kg/mm): 2.68
- Block Height (in): 4.39
- Travel (in): 11.61
- Block Loads (lbs): 1741
- Weight (lbs): 5.29
- Length (mm): 406
- Diameter (mm): 64 I.D.
- Rate (lbs/in): 150
- Rate (kg/mm): 2.68
- Rate (N/mm): 26
- Block Height (mm): 112
- Travel (mm): 295
- Block Load (N)): 7744
- Weight (kgs): 2.4
Who is Eibach?
Eibach has been producing quality and top-notched springs since 1949. The company got its big break during the ’70s when AMG searched for a spring manufacturer that could supply high-quality springs in small quantities, and they found Eibach. Starting their humble beginning in a small workshop, they have now turned into one of the biggest and top spring manufacturers in the world.
Brand of Choice
Eibach has been in the automotive industry for over 60 years. With all those years of experience, it is not surprising that they are the go-to brand of multiple racing disciplines such as Formula 1, Nascar, and other Auto Racing Series. They have acquired vital knowledge that helps them improve their product even more.
They are also the preferred OE supplier of various automakers worldwide. They have partnered with other well-recognized brands such as AMG, Audi, BMW, Ferrari, Ford, Honda, Lamborghini, Lola, MazdaSpeed, Mitsubishi, Nissan, Subaru, Porsche, Renault F-1, Toyota, and many more.
Built with Performance in Mind
Eibach designs its springs to handle tough and extreme conditions. Hence, it is well-suited for racing and high spirited driving. It is made to increase the response, improve stability, reduced body roll, and enhance cornering ability. This gives the driver the confidence needed to be able to bring out the best from the vehicle.
Made to Become the Best
The engineers and designers from Eibach create each component to help the driver interact better with the vehicle. It enables the driver to gain confidence, which is critical when it comes to any performance-driving situation.
Designed using high-quality steel and state-of-the-art processes such as CNC winding technology and advanced corrosion protection, it ensures a quality product that would last for a long time.
Purchase Eibach Springs at Vivid Racing
Eibach provides you with a variety of spring choices specific to your needs. If you want to dominate the track or rule the streets, this is the brand for you. Eibach helps enhance your experience and connects you and your vehicle to the road. Visit Vivid Racing to see what Eibach has in store for you.
Eibach Limited Million-Mile Warranty
PRO-KIT, SPORTLINE, ANTI-ROLL-KIT, PRO-SPACER, PRO-DAMPER, PRO-TRUCK-SHOCK (including Sport and Sport Leveling)
All Eibach, Inc. ("Eibach") Suspension Springs, Anti- Roll-Kits (excluding "hardware") Pro-Spacers, Pro-Dampers and Pro-Truck Shocks(including Sport and Sport Leveling)(collectively, "Products") are covered by a Million-Mile warranty(the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser who retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.Eibach Limited 12-Month Warranty
PRO-STREET-S, MULTI-PRO-R1, MULTI-PRO-R2, MULTI-PRO-DRAG, PRO-ALIGNMENT, DRAG-LAUNCH Air Bags and ANTI-ROLL-KIT Hardware
All Eibach, Inc. ("Eibach") suspension Coilover Systems (Pro-Street-S / Multi-Pro-R1 / Multi-Pro-R2, Multi-Pro-Drag), Drag-Launch (Air bags only), Pro-Alignment Kits and Anti-Roll-Kit hardware (collectively, "Products"), are covered by a 12-month warranty (the "Warranty") from date of purchase. The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light trucks under normal use and operating conditions. These Warranties only apply to the original purchaser who retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach, Inc. will repair, replace or refund the purchase price of the defective product at Eibach, Inc.'s sole digression, which shall fully satisfy and discharge any and all warranty claims.Exclusions from Warranty
Reservation of Rights
- That Have Been Improperly Installed Or Have Not Been Properly Installed By A Qualified, Licensed Auto Mechanic Experienced In The Installation And Removal Of Suspension Products
- That Have Been Improperly Serviced, That Have Been Misused, Or That Have Been Modified, Altered Or Subjected To Abuse, Negligence, Accident Or Collision
- Installed In Any Vehicle That Has Been Modified
- Installed On Any Vehicle That Has Carried Loads In Excess Of Automobile Manufacturer Suggested Weight Limits
- Installed On Any Vehicle That Has Been Used For Rallying, Racing Or Racing-Type Activities Or Off-Road Use
- Presented For Warranty Coverage By A Person Other Than The Purchaser
- Presented For Warranty Coverage After Being Used On A Vehicle Other Than The One On Which It Was Originally Installed.
Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.Exclusion of Other Warranties
These Warranties are the entire and only Warranties for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description.
The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty.Warranty Claim Procedure
To make a claim, the Purchaser should contact the Eibach dealer/ distributor from which the Products were originally purchased. The dealer/distributor should then contact Eibach to obtain a Return Goods Authorization (RGA) number to return the Products to Eibach. Any and all returns must be accompanied by:
- an RGA number
- a sales receipt verifying the purchase of the Products
- a statement containing the Purchaser's name, address, make and model of the vehicle, and a brief description of the claimed defect, including the circumstances under which the defect occurred. Warranty related inquiries should be sent to the following address
Eibach will not accept Product returns without the RGA number, receipt and statement described above. C.O.D. or collect shipments will be refused. Once the returns are received at Eibach, Eibach will evaluate the Products, verify the sales receipt, and investigate the statement.
The Purchaser is responsible for returning the Products to the Eibach dealer/distributor, including shipping costs as well as costs incurred for removing and installing the Products on the vehicle. Eibach does not warranty labor costs.