Erlandson Performance has been developing performance Clutch Kits for snowmobiles, ATV's and UTV's since 1991. During that time the company has grown from being a basement-based hobby/business to their current Headquarters & Operating Complex in the Baxter, Minnesota industrial park where they ship daily to distributors and dealers around the world.
- Designed for 28"+ Tires
- 0-3000' Elevation
- Designed for mud riding with aggressive lug tires
- Helps restore power loss due to addition of mud tires
- Better low end power and torque to get tires turning in the mud
- Quicker backshift which results in crisp throttle response
- Reduced belt slip and clutch heat
- Polaris Scrambler 850 XP 2014
- Polaris Scrambler 850 XP 2013
- Polaris Scrambler 850 XP EPS 2013
Other Part Numbers:
EPI Performance #23-2126
Who is EPI Performance?
Also known as Erlandson Performance, it is a company that was founded in 1991. They have developed performance Clutch Kits for various vehicle platforms such as ATVs, UTV’s and snowmobiles. The company started as a basement-based hobby which grew to become a booming business and is now situated in Baxter, Minnesota, an industrial park. Today, they have become the most sought-aftermarket brand in their market segment.
All their products are manufactured and tested in-house. Using their experience in manufacturing high-quality products and their knowledge from real-world scenarios, they can provide parts that satisfy their customers’ demands.
Wide Range of Product
The company offers a wide variety of products ranging from clutches, driveline components, CV joints, axles, U-joints, seals, bearings, and suspension components. All their products guarantee to restore your vehicle’s performance as if it was new. The company is best known for its performance clutch kits and heavy-duty belts for ATVs/UTV’s. It is well suited for enthusiasts who modify their vehicles to perform under extreme conditions.
Purchase EPI Performance at Vivid Racing
If you are in the market for high-quality performance parts for your utility vehicles, then look no further as EPI Performance is the brand for you. They have parts designed for almost all vehicle makes and models and are guaranteed to fit perfectly without any modification. To know more about EPI Performance and what they can offer, visit Vivid Racing and check out their list of products that fit your specific requirement.
EPI warrants its products to be free of defects in material and manufacturing for 1 year from the original date of purchase. This does not apply to electrical components, non-EPI branded parts, OEM primary and secondary clutches, normal wear or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration. This warranty covers the repair or replacement of the EPI product in question only, and does not cover labor charges to remove or install the EPI part or any other part or component that may incur damage as a result of a defective EPI part. The customer is responsible for any labor charges involved in removing and replacing the defective part, and for shipping charges to return the defective part to EPI.
BELTS:If, within 1 year of original PURCHASE date, the EPI belt fails due to a defect in material or manufacturing, a replacement belt will be provided by EPI upon inspection. A $20 handling fee and certain conditions apply, please see your EPI belt sleeve warranty form or contact our Returns Department at 218-829-6036 for details, and request a warranty claim card.
Value Line Clutches:Due to the primary clutch being a normal wear item and the extreme conditions it operates in, we offer a limited 30 day warranty on manufacturing defects only. If you experience any failure of this clutch within 30 days that is not due to normal wear and use, we will inspect and replace the clutch if we determine it was due to a manufacturing defect. Customer is responsible for shipping costs to return the clutch for inspection. This warranty does not cover any damage caused by a clutch failure or labor costs.
WHEEL SHAFTS & CV Joints:EPI Wheel shafts and CV Joints that are determined to have a defect in material or manufacturing will be replaced at no charge within 60 days of original purchase date. After 60 days and up to 1 year of the original purchase date a $25 fee will be charged for replacement. EPI Wheel shafts and CV Joints are designed for use on STOCK machines. If your machine is lifted in any way this may result in failure of the component that is not covered by warranty. A lifted machine results in a more severe CV joint angle and our replacement components are not designed to tolerate this increase in angle and may fail. Upon inspection, if any of the related signs of over-extended angles are present, the warranty will be void. Customer is responsible for shipping the failed component to EPI for warranty inspection. This one year warranty does not apply to damages caused by removal of parts, modifications to the product, normal wear and tear, damages caused by accidents, improper use of the product, improper installation of the product, misuse, neglect or improper maintenance. The one (1) year does not cover use of the product for racing or other competitive activities. The warranty does not apply to rental or commercial purpose uses.
Electrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes and regulators.
Normal wear items:Normal Wear Items are not covered under warranty unless, within 1 year of original PURCHASE date, the EPI part fails due to a defect in material or manufacturing. In this case, a replacement part will be provided by EPI upon inspection. Normal wear items include but are not limited to: Ball joints, belts, brake pads and shoes, brake rotors, bearings, carbide runners, clutch rebuild kits, CV boots, seals, springs, suspension rebuild kits & components, slides, tie rod ends and u- joints.
WARRANTY IS VOID on any vehicle that has been altered in any way to include performance enhancements to the engine other than the OE DESIGN.
EPI reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and all such determination shall be final.
All warranty claims will be handled directly by EPI. To obtain service under this warranty please contact EPI for return authorization. Cost of removal, reinstallation, product pick up and delivery are the sole responsibility of the original owner. Retail customers must provide proof of purchase with in 1 year for warranty to be honored. ALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RA NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 15 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.
EPI has no control over the use of any part. EPI expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part. EPI assumes no responsibility for damage or injury of any kind because of normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration of any parts in any way by any person. EPI reserves the right to make changes to the warranty policy at any time without notice.