- 1-480-966-3040 8am-5pm MST
- 1-480-966-3040 8am-5pm MST
- 0
Now Offering 0% Finaning With Affirm! Select Your Option At Checkout! - Learn More
$370.00
Model #EVE-FK8V2-CF-MAF
Free Shipping
Designed a tube with an integrated Mass Air Flow (MAF) sensor mount and an innovative Venturi stack matched to the inner diameter of the filter neck. This curvature allows the airflow to remain laminar as it goes through the filter and enters the tubing. This replaces the stock flexible rubber tube which has several deep ridges and creates turbulence in the flow path.
To maintain a degree of flexibility - the tube is independent of the airbox enclosure and is able to move within the airbox, which relieves any stresses from the engine movements. The Eventuri tube design results in an aerodynamically efficient flow path from the filter to the turbo allowing the turbo to generate boost more effectively and reduce lag. On the road this is noticeable with the car having a sharper and more eager throttle response as boost is generated quicker.
Performance Gain (FK2 at stage 2 tune): 15-18hp, 17-20ft-lb
Performance Gain (FK8 stock software): 5hp 5ft-lb peak, 15hp 18ft-lb under 4,000 RPM
Presenting a World First an all carbon FK8 turbo inlet tube. We have invested months of intense R&D in developing an inlet which leaves no room for compromise. VOLUME FLOW QUALITY TEMPERATURE are the 3 main design criteria which we sought to meet.
1) VOLUME : Inlet Diameters Eventuri 78mm : Stock 63mm. By maintaining the MAF section diameter from the intake through to the turbo tube we have increased the cross sectional area by over 53% for the majority of the intake flow path to the turbo. Clearly with significantly larger internal diameter sizes, the Eventuri tube encapsulates a much larger internal volume which de-restricts the flow path to the turbo. This allows the turbo to operate more efficiently and spool up to peak boost levels faster. It also allows the turbo to operate at peak boost with less turbine loading.
2) FLOW QUALITY : Having just a large internal volume is no good unless the flow path also allows for smooth airflow to the turbo. By using high temperature Prepreg Carbon Fiber we have managed to achieve a smooth internal surface. In contrast, the stock inlet tube is made from cast aluminium which ends up with a rough internal surface. This coupled with the smooth curvature of the elbow results in a flow path which minimises turbulence.
3) TEMPERATURE : The final criteria was to minimise the conduction of heat into the airflow. The stock inlet is directly connected to the turbo and so immediately conducts heat as the turbo spools. Our system uses a machined flange which connects to the turbo and then a silicon coupler with an integrated thermal spacer to keep the carbon elbow from having direct contact with the turbo. This barrier coupled with the low through-thickness thermal conductivity of carbon fiber results in less heat being transferred to the airflow.
This turbo tube has been designed to fit our FK8 intake with the updated V2 MAF tube.
Features:
Eventuri products are NOT ELIGIBLE FOR RETURNS
WARNING: Cancer and Reproductive Harm
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2017-2021 Honda Civic Type-R |
Civic Type-R | 2017-2021 |
When it comes to performance upgrades, it is common for people to think about camshafts, suspensions, pistons turbochargers and superchargers. But equally as important is upgrading your intake system. It is the component responsible for drawing air to engine which is a critical component in its combustion process. Not all intake system are alike and Eventuri is one of the few companies that creates a product that actually works.
Eventuri was founded by a knowledgeable team of engineers and auto enthusiasts who shared a background in aeronautics and tuning, as well as a passion for high-performance cars. Having all these knowledge and expertise under one roof allows the company to create the best performing intake system available in the market.
After owning several intakes and finding them to be disappointing in terms of gains, the team decided to take it upon themselves and make a change. They set out to reinvent the benchmark in the intake market when it comes to design, technology, and engineering. The ultimate goal was to provide real gains to consumers and publish genuine figures that live up to their claims. Today, they are known as one of the most prestigious air intake manufacturers in the automotive industry.
With so many aftermarket intakes available in the market, it begs the question, “What is so special about the Eventuri intakes?” Well, there are three elements that help explain what sets Eventuri apart from other brands. The first is the patented Eventuri filter housing design. The second being the brand’s renown bespoke filters. The third is its emphasis on creating a “Complete Solution” and not cutting corners.
Eventuri’s intake systems are extensively developed using cutting-edge designs and undergo rigorous testing and prototyping methods. The company is primarily focused on performance and numbers; therefore, every single design undergoes CFD analysis and is validated during the prototype stage. It’s at this point where intake temperature and volumetric airflow are measured, and dynamometer testing takes place. Eventuri aims to publish all the information and figures to illustrate the depths in manufacturing an effective intake from the concept stage to market.
Eventuri prides itself in using only the best materials for each component of its intake – even down to the choice of fasteners. The company takes extra steps to ensure that the quality of the products are optimal. This makes them set a new standard in the performance industry.
The company pushes itself even further by offering products made out of the most exotic material such as carbon fiber. This material is often seen in race cars and exotic vehicles due to its strength and lightness. It enables the company to cement their position as the industry leader in their market segment.
If you are looking to up your car’s performance and experience a real difference when driving, look no further. Vivid Racing has all the Eventuri parts you need to improve your vehicle’s airflow and efficiency. We carry Eventuri cold air intakes, engine covers, intake boxes and manifolds, scoops, flanges, and hoses. Can’t find a part you’re searching for? Contact our sales team today at (480) 966-3040.
