Save up to 40% on VR Forged wheel sets! - Shop Now
Wheels - Affirm
  See more parts for your BMW 135i

Evolution Racewerks Competition Series Black Dual Oil Cooler Upgrade Kit BMW 135i 08-13

$1,545.00 SALE: $1,390.50

Evolution Racewerks

Model #BM-COOL001B


Shopper Award

After 3 years of development, they re finally ready. Introducing Evolution Racewerks Competition Series Twin Oil Cooler System that solved the dreaded limp mode!

The 135i/335i comes from the factory with a small oil cooler with a core size of 8.75"x4.75"x1" (222mmx121mmx26mm) which comes out to 41 cubic inches of core. The Competition Series Twin Oil Cooler system features two Huge identical oil coolers 11"x8"x2" (280mmx203mmx51mm) with a core size of 9"x8"x2" (229mmx203mmx51mm) each. Each oil cooler comes out to 144 cubic inches which is 3.5 times larger than the factory unit each! Since there are two oil coolers, you have a combined 288 cubic inches of oil cooler core, over 700% more core than the factory oil cooler. Through 3 years of development and testing, Evolution Racewerks Competition Series Oil Cooler has kept Evolution Racewerks Time Attack 135i from seeing the dreaded limp mode issue due to oil temperatures. Regardless of conditions (ambient temperatures and track lay out), Evolution Racewerks have never exceeded 259F! This is in 110F+ track temperatures and wide open throttle pulls all the way to 6 gear (160+ mph). Through test cars used in Evolution Racewerks beta testing program, Evolution Racewerks are getting independently gathered, unbiased data showing the same exact thing.

Each Competition Series Twin Oil Cooler mounts to its own box enclosure. Louvers on the backside of the box enclosure ensures airflow through the oil coolers while protecting the oil cooler from road debris, especially debris kicked up from the front tires. During initial testing, Evolution Racewerks box enclosure had a big window (open hole) in the back for airflow. However, throughout the race season, it took so much abuse from rocks, tire and other debris kicked up from the front tires that Evolution Racewerks had to replace the oil coolers on Evolution Racewerks Time Attack 135i. Thus, instead of a big hole for airflow to flow through, Evolution Racewerks used louvers instead to protect the back side of the oil coolers. This effectively solved the issue without any affect on performance. Oil temperatures as well as oil temperature deltas stayed the same.

Features:

  • Completely solves the dreaded limp model issue found on the N54/N55 engines due to oil temperature!
  • TWO large 9"x8"x2" (11"x8"x2" with end tanks) Oil Coolers. Factory stock single oil cooler 8.75"x4.75"x1"
  • Over 700% larger (combined twin coolers) than the factory oil coolers!!!
  • Twin coolers have a total of 288 cubic inches of core! Factory oil cooler has 41 cubic inches.
  • Available with no finish (silver) orType III Hard BlackAnodizing(for stealth). Hardanodizinghelps improve durability of intercooler fins against damage from road debris (rocks).
  • Enclosed box with venting louvers - protects oil coolers from road debris without sacrificing airflow!
  • High Quality Goodrich AN Fittings in Black Anodize.
  • High End Goodrich Nylon Braided Oil Lines - much better than Stainless Steel braided Oil Lines
  • Optional Carbon Fiber or Aluminum Shrouding to direct airflow through the oil coolers for improved efficiency.
  • Includes all hardware needed to install. No need to go hunting for hardware to finish the installation.
  • Developed under the harsh racing conditions on Evolution Racewerks 135i Race Car.
  • Limited Lifetime Warranty.
Fitment:
  • BMW 135i 08-13
Note:
  • Images are for representation only. Actual product may vary.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2008-2013
BMW 135i

About Evolution Racewerks

Evolution Racewerks started out as a custom fabrication shop in 2004. Its experienced staff of fabricators and welders can virtually craft any part that you want. Evolution Racewerks’ talented welders (TIG & MIG) are skilled at working with aluminum, stainless steel, and titanium. The company takes pride in helping petrolheads build their dream race car from the ground up. Evolution Racewerks has you covered from the beginning stages of chassis preparation, which includes steam welding and roll cage construction, to the complete assembly of the car. 

Evolution Racewerks Can Do It All

If you dream it, Evolution Racewerks can build it. The company specializes in a number of different areas that all come together to create automotive works of art. Evolution Werks’ experienced technicians can install just about any part you may have. Nothing is impossible with the team’s custom fabrication, tuning, and suspension skills. The brand is known for fabricating custom welded (TIG & MIG) steel, stainless steel, aluminum, and titanium parts. As aforementioned, Evolution Racewerks’ specialty lies in roll cage assembly and chassis welding, as they have built numerous roll cages to meet all racing rules set in place by sanctioning bodies. Whether it is NHRA drag racing, SCCA, drifting, or road racing, Evolution Racewerks can do it all. 

Evolution Racewerks takes pride in being a one-stop shop for building, servicing, and pit crewing for your race car. It boasts years of experience building race cars for its customers, many of which brought home trophies and were featured in several magazines.

Evolution Racewerks at Vivid Racing

Vivid Racing has an extensive inventory of Evolution Racewerks products that will enhance the look, sound, and performance of your vehicle. We carry intercoolers and intercooler pipes, catted and catless downpipes, oil cooler upgrades, charge pipe kits, brake lines, and more! If you have any questions regarding the parts listed above or about Evolution Racewerks, please contact our sales team at (480) 966-3040.

Check out these other great products