Buy Now - Pay Later with Affirm
Learn More

Exedy Stage 3 Hyper Single Clutch Kit Ford Mustang Bullitt 2008

$1,593.79 Sale:$1,354.69

Exedy

Model #EH02SD1

In Stock

All Hyper Clutches come with a steel flywheel and a 6-pad disc with cerametallic facing, and a spring center damper.

The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and generally higher than other single plate clutches.

Cerametallic Friction Disc:
  • Exedy Exclusive Friction Composition
  • 6-pad design
  • High friction coefficient material
  • Designed for low wear and high heat resistance
  • Heavy Duty hardened spring damper
  • Heavy Duty bonding agents retain clutch material
  • Generally smaller and thinner to reduce weight
  • Reduced weight = lower inertia = quicker shifting, less wear and tear on synchros
Forged Aluminum Cover:
  • Average of 40% increase in clamp load over stock
  • Extra capacity holds street/race car power upgrades
  • Forged assembly far stiffer than stamped-type
  • Incredible strength means no clamp-load deflection
  • Integrated turbine-like fins enhance airflow, keeping clutch assembly cooler and will help extend life
  • Ductile iron pressure plate provides high strength, anti-burst protection in all temperature ranges
Forged Chromoly Flywheel:
  • Combination of low weight and high heat capacity
  • Designed for Rally, Drag and hi-performance Street
  • Reduced weight and inertia means snappier throttle response and quicker shifting
  • Designed to increase airflow to help cooling (most)
  • One-piece flywheel - starter teeth machined in place
  • Unlike aluminum flywheel, ring gear cannot separate
  • Unlike aluminum flywheel, friction surface can???t warp
  • May be resurfaced for future clutch service
  • Tested up to 18,000 rpm without failure
  • All Exedy Chromoly Flywheels are SFI approved
Features:
  • Single
  • Ceramic
  • Sprung Center Disc
  • 250mm/Push Type/10T/27.5 Spline
  • Wheel Torque Rating 506 lbs./ft.
  • 3597 lbs. Clamp Load
  • Kit Includes: Clutch Cover Assy/CD Assy/Flywheel/Cover Bolt SE/Flywheel Bolt
Exedy Corporation is based out of Japan and it's main focus is aftermarket and OEM clutch kits. Most well known in the tuner industry for their high performance clutch products, Exedy has several different kits available for street or race cars. Their highest line kit is a triple plate carbon fiber disk clutch kit, while the most popular unit is their Twin Plate kit with Flywheel. These kits are generally for high performance street or race cars with horsepower exceeding 500whp. Exedy also manufactures great OEM replacement clutch kits for your average street vehicle.

Check out these other great products