Fabtech 6in Performance System Coil Springs Dodge Ram 2500-3500 4WD 03-08
Fabtechs Performance System features extended length 2" OD heavy wall control arm links pivoting on urethane bushings to keep the front suspension geometry proper while allowing increased travel. Front lift options include replacement Coil Springs or our Dirt Logic 4.0 Coilover Conversion system. The replacement Coil Springs provide a quality highway ride with good offroad capability. To enhance the Coil Spring front suspension we offer a Multiple Shock system for increased dampening capacity offroad.
The Coilover Conversion features our Dirt Logic 4.0 for maximum suspension dampening in rugged offroad conditions. The conversion system does not require elimination of the factory coil spring bucket and is a 100% bolt on installation.
The vehicle specific Dirt Logic 4.0 Coilovers features a 4" OD remote reservoir connected via -10 hose assembly and includes large billet reservoir clamps and limiting straps. As an upgrade to the Coilover Conversion we offer an optional front Dirt Logic Hydraulic Bumps Stop system that aids in compression dampening for severe offroad driving. Both systems include Trac Bar bracketry, Pitman Arm, Sway bar mounts, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system.
- FTS23017BK Component Box
- FTS7189 Performance Front Shocks
- FTS7266 Performance Rear Shocks
Choose from one of the following Coil Spring Kits:
- FTS23014BK Coil Spring Kit "Gas V-8 only"
- FTS23020BK Coil Spring Kit "Diesel only"
Choose from one of the following Transmission Drop Brackets:
- FTS93005 2003-05 Diesel w/Auto Trans
- FTS93003 2006-07 Diesel 5.9L w/ Auto Trans only
- FTS93008 2007 6.7L Diesel w/ Auto Trans only
- FTS93004 2003-05 Gas w/Auto Trans
- FTS93007 2006-07 Gas w/Auto Trans
- Does not fit Standard Cab models
- Non dually models only.
This part ships via truck frieght due to the high shipping weight of this product. Please add item to cart for shipping cost or contact us
for a quote.
Other Part Numbers:
Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with their seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for designs that continue to lead the market.
To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.