See more parts for your Jeep Gladiator

Jeep JL and JT Gladiator 2.5 Ton Combo Rubicon 18-Pres Wrangler JL 20-Pres Jeep Gladiator Fusion 4x4

$1,075.00

Fusion4x4

Model #FUS-25JLJTR-DTC


Shopper Award

Fusion 4x4 2.5 Ton Tie Rod and Drag Link for the 2018 and newer Jeep Wrangler JL and JLU, and 2020 and up Jeep Gladiator JT. This part fits all Rubicon Jeep JL/JLUs and JTs AND JT Gladiators with the max tow package.

Backed by our No BS lifetime warranty. Should you ever manage to bend the tie rod or a forging, send us a picture and we'll replace the affected part. Compare that to popular competitors who charge for expensive replacement parts.

The Fusion 2.5 Ton steering was designed to be the strongest and most innovative on the market, with the lowest total cost of ownership.

What makes this steering so bad ass you ask?

  • Massive 1-1/4 inch shank heat-treated forged ends
  • Jeep JL and JT specific tapered ends. No reaming required.
  • Anti-rotation bushings that limit tie rod roll, resulting in tighter steering, especially when used with hydro assist
  • 1.75 inch diameter solid 7075 aluminum. 7075 is popular in off-road racing due to its memory. If you hit the tie rod hard enough to make it flex, the bar will return to straight. The aluminum is CNC machined to exact tolerances. Just because you're not racing in King of the Hammers doesn't mean you can't run the same parts! We tested numerous diameters and tempers of aluminum to determine the optimal specifications. The aluminum sleeve is designed to flex before bending or breaking a forging or worse, a steering knuckle.
  • Wrench flats for easy installation
  • Lock washers to prevent jam nuts from loosening
  • Replaceable cartridge ends should one ever wear out
Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2020
Jeep Gladiator

2018-2020
Jeep Wrangler

WARRANTY

Fusion 4x4 Manufactured Products

All Fusion 4x4 LLC manufactured products are warranted to be free of defects in material and workmanship for one year from the original purchase date. All products produced by Fusion 4x4 are designed exclusively for off road applications and therefore do not have any warranty or guarantee of performance. Because of the wide variety of applications of our products, the effectiveness, warranty and longevity of this equipment are directly related to the manner in which it is installed, used and/or maintained. The entire risk as to the quality and performance of these Fusion 4x4 products is with the purchaser. All components must be used in their proper places and proof of this is required for warranty claims. Any substitutions of other manufacturers components or exemptions of required components will immediately void the warranty.

Fusion 4x4 components may have minor finish damage to surfaces which may occur during shipping and is not covered under warranty.

This warranty is non-transferable. Fusion 4x4's obligation under this warranty is limited to the repair or replacement of the defective parts only; at Fusion 4x4's discretion. Any costs associated with removal, installation, reinstallation, shipping charges, and incidental or consequential damages are excluded from this warranty. Additional exclusions include damage due to improperly installed products, damage due to abuse or neglect, products that have unauthorized modifications or alterations, products used in competition, damage due to accidents or other abnormal, excessive or improper use, bushings and other wear items.

What is not covered: bushings, rod ends, seals, ball joints, bearings, and any other parts identified as wear items. These parts are subject to wear and are not considered defective when worn. Products may be covered by an original manufacturer warranty.

Fusion 4x4's No BS Lifetime Steering Guarantee
All Fusion 4x4 "Hard" steering parts come with our exclusive No BS lifetime guarantee on all hard parts of “2.5 Ton” steering components. All aluminum sleeves and forged rod ends will be replaced if bent, broken or damaged in any way that effects their function. All components must be used in their proper locations and proof of proper installation to validate any warranty claim. Any substitutions of other manufacturers components or exemptions of required components can void any warranty associated with the product. Improper use and setup of hydraulic assist rams on tie rods will void this warranty. Use of hydraulic assist on drag links will void this warranty. Fusion 4x4 guarantees that all of its products are of the finest quality and free from manufacturing defects. Any product that has been manufactured incorrectly or is of a defective nature will be repaired or replaced at the discretion of Fusion 4x4. Replaceable cartridges are warrantied against manufacturer's defect only and are only returnable if they have not been installed. Fusion 4x4 covers the cost of the part only shipping, vehicle down time, etc is the responsibility of the end user. Prior to tearing the vehicle down for a warrantied item, please email or call for how to submit a warranty claim so extra vehicle down time and labor is not incurred.

Check out these other great products