- 1-480-966-3040 8am-5pm MST
- 1-480-966-3040 8am-5pm MST
- 0
Now Offering 0% Finaning With Affirm! Select Your Option At Checkout! - Learn More
$2,450.00
Model #EI416
Free Shipping
Get bind free wheel travel through the entire suspension cycle of your Jeep with our 3 Link Front Long Arm Kit. Both our personal Jeeps that we've installed these kits on for testing drive better than they ever have.
One is on 40's and the other on 42's. We can go down the freeway at 80mph with one hand on the wheel as if you're driving a normal vehicle. Proper handling is not due to the number of links you have, its all about proper geometry in the design of the kit. We spent countless hours designing this kit to be the best both on road and off road.
This kit includes a heavy duty transmission cross member, boxed lower links, upper link, chassis and axle side upper link brackets and a front track bar. This kit pushes the front end forward 1.5 to 3 inch depending on where you set the links
The transmission cross member is built from high strength 3/16 inch steel plate which is then precision cut, bent and welded.
Our boxed lower links are built from high strength 1/4 inch steel plate and adjustable on one side. They are also precision cut and then fully TIG welded together. We use the MetalCloak Duroflex Joint on each side of the link.
The upper link in this kit is 1 3/4 inch x .120 chromoly with chromoly TIG welded bungs. This link is adjustable on both sides. We use the MetalCloak Duroflex Joint on both sides of the link.
The chassis side upper bracket is a weld on part. It is made from 3/16 inch high strength steel and features a chassis doubler plate that is welded on first. This plate has alignment holes that match up with existing factory holes in the chassis for easy and precise installation.
The reason for the doubler plate is to distribute the forces from the suspension over a larger surface area on the chassis which adds strength and helps avoid cracks from forming years down the road.
Our axle side bracket is made from 1/4 inch high strength steel, Its designed to use a joint on both sides of the link itself unlike the factory style which has the joint in the axle bracket attached to the housing. We did this to be able to use a larger bracket with more surface area to weld to the axle housing for the most strength possible.
Our front track bar is built from high strength 3/16 inch steel plate. Building it out of plate allowed us to achieve clearances that just aren't possible with regular tubing. We were also able to gain more strength this way and build a track bar that does not flex in the bent areas of the bar.
It uses a 7/8's hiem joint on one side and a 7/8's uni ball on the other. Using these instead of a bushing also eliminates any movement in the joints themselves.
Bump stop pads and chassis brackets are included with the front coil over kit and do not come with or welded to the lower links.
WARNING: Cancer and Reproductive Harm
| Make Vehicle | Model | Submodel | Year | Engine | Notes |
|---|---|---|---|---|---|
|
2007-2018 Jeep Wrangler |
Wrangler | 2007-2018 |
Excessive Industries started in 2015. The company has been in the industry for over a decade, offering offroad accessories. The company specializes in the Jeep platform. Starting from developing parts and accessories for their own personal rigs, they have become a full-time company providing parts for Jeep enthusiasts who wanted to have more out of their vehicles.
The company’s founder has an extensive offroading background. Starting at a young age in his father’s garage, he was able to expose himself to various techniques and knowledge of how to properly make a vehicle offroad worthy. After years of trial and error and hands-on experience, he was able to determine the best formula for offroading, which he applied to the company.
The company is committed to providing its customers with the best quality of parts that is durable and could take the harsh conditions of offroading. All their parts are 100% made in the US, making sure that you get the highest quality product at the most affordable price.
All their products are made out of durable materials, and the amount of quality craftsmanship is evident in the end results. No shortcuts had been made during manufacturing. Hence, you are sure that you will be getting high standards, safe, and reliable.
If you want to improve your Jeep into an offroad warrior, then Excessive Industries in the brand for you. Using real-world experience in creating their products, you know you have a product that performs well. Visit Vivid Racing and check out the list of parts specific to your needs.
