Save up to 40% on VR Forged wheel sets! - Shop Now
BRAKES - AFFIRM
  See more parts for your Alfa Romeo Spider

MagnaFlow Exhaust Products Universal Catalytic Converter - 2.00in.

$132.62 SALE: $126.00

MagnaFlow

Model #94014

Free Shipping

Hurry Low Stock


Shopper Award

This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles.

Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.

MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.

All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

  • Stainless steel construction
  • Federal Emissions compliant design
  • Formulated for Gas and Diesel Applications
  • Universal Catalytic Converter - 2.00in.

    Features

    • Series: Standard Grade
    • Subtitle: Federal / EPA Compliant
    • Title: Standard Grade Universal
    • Type: Universal
    • Air Tube Adaptable: Yes
    • Body Type: Clam Shell
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Inlet Attachment: Weld-On
    • Inlet Diameter: 2
    • Inlet Orientation: Straight
    • Material: Stainless Steel
    • Outlet Attachment: Weld-On
    • Outlet Diameter: 2
    • Outlet Orientation: Straight
    • Oxygen Sensor Location: None
    • MagnaFlow specializes in superior catalytic converter and exhaust technology and each converter is designed to the exact original equipment specifications while keeping the Check Engine Light off.

    Notes:

    Fits position: Rear

    Fits position: Front

    Fits position: Right

    Fits position: N/A

    This product is for Racing Competition only and is not legal for use in highway or street vehicles or other non-racing competition off-road vehicles. Purchasing this product requires you to sign our Vehicle Compliance Waiver here.

    Proposition 65

    /!\ warningWARNING: Cancer and Reproductive Harm

    https://www.P65Warnings.ca.gov

    Vehicle Engine Notes
    1990-1992
    Alfa Romeo Spider

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1980
    American Motors AMX

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1980-1983
    American Motors Concord

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1981-1988
    American Motors Eagle

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    American Motors Eagle

    4 Cylinder 2.5 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1981-1983
    American Motors Eagle
    DL SX4
    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    American Motors Eagle
    SX4
    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    American Motors Spirit

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1980
    American Motors Spirit

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1977-1979
    BMW 320i

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Buick Century

    6 Cylinder 3.8 Liter
    • Cutting and Welding Required During Installation
    1982-1985
    Buick Century

    6 Cylinder 3.0 Liter
    • Cutting and Welding Required During Installation
    1983-1985
    Buick Century

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1984
    Buick Skyhawk

    4 Cylinder 1.8 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1984
    Buick Skyhawk

    4 Cylinder 2.0 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1983
    Buick Skyhawk

    4 Cylinder 1.8 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1983
    Buick Skyhawk

    4 Cylinder 2.0 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982-1985
    Buick Skylark

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1983
    Chevrolet Camaro

    4 Cylinder 2.5 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1982
    Chevrolet Camaro

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1982
    Chevrolet Camaro

    4 Cylinder 2.5 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982
    Chevrolet Camaro

    6 Cylinder 2.8 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1984
    Chevrolet Cavalier

    4 Cylinder 2.0 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1983
    Chevrolet Cavalier

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1982-1986
    Chevrolet Celebrity

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1981-1987
    Chevrolet Chevette

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1982-1983
    Chevrolet Citation

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Chevrolet Citation II

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1985-1988
    Chevrolet Nova

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1981, 1983
    Chrysler Cordoba

    6 Cylinder 3.7 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1980, 1982
    Chrysler Cordoba

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1989-1993
    Chrysler Daytona

    4 Cylinder 2.5 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1987-1988
    Chrysler Daytona

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1984
    Chrysler E Class

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1983
    Chrysler Fifth Avenue

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1986
    Chrysler Laser

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Chrysler Laser

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1986-1993
    Chrysler LeBaron

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1987, 1989
    Chrysler LeBaron

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982
    Chrysler LeBaron

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982
    Chrysler LeBaron

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1980
    Chrysler LeBaron

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1988
    Chrysler LeBaron
    Base
    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1988
    Chrysler LeBaron
    GTS
    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1988
    Chrysler LeBaron
    Premium
    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1986-1987
    Chrysler New Yorker

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1984
    Chrysler New Yorker

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982
    Chrysler New Yorker

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1986-1988
    Chrysler Town & Country

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1984
    Chrysler Town & Country

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982
    Chrysler Town & Country

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982
    Chrysler Town & Country

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982-1983
    Dodge 400

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1986-1988
    Dodge 600

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1988
    Dodge 600

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1986-1989
    Dodge Aries

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1981-1989
    Dodge Aries

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1984-1987
    Dodge Caravan

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1983-1986
    Dodge Charger

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1985-1986
    Dodge Charger

    4 Cylinder 1.6 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1983, 1985
    Dodge Charger

    4 Cylinder 2.2 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1984
    Dodge Charger

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1983
    Dodge Charger

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1987-1988
    Dodge Dakota

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1986-1993
    Dodge Daytona

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Dodge Daytona

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1983
    Dodge Diplomat

    6 Cylinder 3.7 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982
    Dodge Diplomat

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1986-1989
    Dodge Lancer

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1985-1989
    Dodge Lancer

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1984-1987
    Dodge Mini Ram

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1983
    Dodge Mirada

    6 Cylinder 3.7 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982
    Dodge Mirada

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1983-1990
    Dodge Omni

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Dodge Omni

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1983
    Dodge Omni

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1983
    Dodge Omni

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    Dodge Omni

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    Dodge Omni

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Dodge Omni

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Dodge Omni

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1980
    Dodge Omni

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1982-1984
    Dodge Rampage

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1988-1994
    Dodge Shadow

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1987-1994
    Dodge Shadow

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1989-1995
    Dodge Spirit

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Ford Escort

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1982
    Ford EXP

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1988-1989
    Ford Festiva

    4 Cylinder 1.3 Liter
    • Cutting and Welding Required During Installation
    1980-1986
    Ford LTD

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1980-1986
    Ford LTD

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1981-1985
    Ford LTD

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Ford LTD

    8 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1987-1991
    Ford LTD Crown Victoria

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1983
    Ford Mustang

    4 Cylinder 2.3 Liter
    • Cutting and Welding Required During Installation
    1981
    Ford Mustang

    4 Cylinder 2.3 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1981
    Ford Mustang

    8 Cylinder 4.2 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1980
    Ford Pinto

    4 Cylinder 2.3 Liter
    • Cutting and Welding Required During Installation
    1989-1994
    Ford Ranger

    4 Cylinder 2.3 Liter
    • Cutting and Welding Required During Installation
    1983-1988
    Ford Ranger

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1983-1984
    Ford Ranger

    4 Cylinder 2.3 Liter
    • Excluding High Altitude Package
    • Cutting and Welding Required During Installation
    1983-1985
    Ford Thunderbird

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1983-1987
    Hyundai Pony

    4 Cylinder 1.4 Liter
    • Cutting and Welding Required During Installation
    1987
    Hyundai Stellar

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1985-1986
    Hyundai Stellar

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Jeep Cherokee

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1982-1983
    Jeep Cherokee

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1981
    Jeep Cherokee

    6 Cylinder 4.2 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982-1983
    Jeep CJ5

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1982-1986
    Jeep CJ7

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Jeep CJ7

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Jeep Grand Wagoneer

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1982-1987
    Jeep J10

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1982-1985
    Jeep Scrambler

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Jeep Scrambler

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Jeep Wagoneer

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1982-1983
    Jeep Wagoneer

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1981
    Jeep Wagoneer

    6 Cylinder 4.2 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1987-1990
    Jeep Wrangler

    6 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1989-1990
    Laforza Laforza

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1980-1983
    Lincoln Mark VI

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1980
    Lincoln Mark VI

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1980
    Lincoln Mark VI

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Lincoln Mark VII

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1982-1985
    Lincoln Town Car

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1981
    Lincoln Town Car

    8 Cylinder 5.0 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1981
    Lincoln Town Car

    8 Cylinder 5.0 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1986-1991
    Mazda RX-7

    2 Cylinder 1.3 Liter
    • Cutting and Welding Required During Installation
    1981-1985
    Mazda RX-7

    2 Cylinder 1.1 Liter
    • Cutting and Welding Required During Installation
    1985
    Mazda RX-7

    2 Cylinder 1.3 Liter
    • Cutting and Welding Required During Installation
    1984
    Mazda RX-7

    2 Cylinder 1.3 Liter
    • Cutting and Welding Required During Installation
    1980
    Mercury Bobcat

    4 Cylinder 2.3 Liter
    • Cutting and Welding Required During Installation
    1983
    Mercury Capri

    4 Cylinder 2.3 Liter
    • Cutting and Welding Required During Installation
    1983-1985
    Mercury Cougar

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1989
    Mercury Grand Marquis

    8 Cylinder 5.0 Liter
    • Replaces Both Front and Rear OE Converters
    • Air Tube
    • Cutting and Welding Required During Installation
    1989
    Mercury Grand Marquis

    8 Cylinder 5.0 Liter
    • Replaces Both Front and Rear OE Converters
    • Air Tube
    • Cutting and Welding Required During Installation
    1989
    Mercury Grand Marquis

    8 Cylinder 5.8 Liter
    • Air Tube
    • Replaces Both Front and Rear OE Converters
    • Cutting and Welding Required During Installation
    1989
    Mercury Grand Marquis

    8 Cylinder 5.8 Liter
    • Air Tube
    • Replaces Both Front and Rear OE Converters
    • Cutting and Welding Required During Installation
    1980-1981, 1983-1986
    Mercury Grand Marquis

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1981-1985
    Mercury Grand Marquis

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1980-1981, 1983-1985
    Mercury Grand Marquis

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Mercury Grand Marquis

    8 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1982
    Mercury LN7

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Mercury Lynx

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Mercury Marquis

    8 Cylinder 5.0 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Mercury Marquis

    8 Cylinder 4.2 Liter
    • Cutting and Welding Required During Installation
    1980-1981
    Mercury Marquis

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1980-1981
    Mercury Marquis

    8 Cylinder 5.8 Liter
    • Cutting and Welding Required During Installation
    1987
    Mitsubishi Galant

    4 Cylinder 2.4 Liter
    • Cutting and Welding Required During Installation
    1984-1987
    Nissan Micra

    4 Cylinder 1.2 Liter
    • Cutting and Welding Required During Installation
    1986-1988
    Nissan Multi

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1987-1990
    Nissan Sentra

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Oldsmobile Cutlass Ciera

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1984-1985
    Oldsmobile Cutlass Ciera

    6 Cylinder 3.8 Liter
    • Cutting and Welding Required During Installation
    1982-1985
    Oldsmobile Cutlass Ciera

    6 Cylinder 3.0 Liter
    • Cutting and Welding Required During Installation
    1982-1983
    Oldsmobile Cutlass Ciera

    4 Cylinder 2.5 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1982-1983
    Oldsmobile Cutlass Ciera

    6 Cylinder 3.0 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982-1983
    Oldsmobile Cutlass Ciera

    6 Cylinder 2.8 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1983-1984, 1986
    Oldsmobile Firenza

    4 Cylinder 1.8 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1984, 1986
    Oldsmobile Firenza

    4 Cylinder 2.0 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1983
    Oldsmobile Firenza

    4 Cylinder 1.8 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1983
    Oldsmobile Firenza

    4 Cylinder 2.0 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1982-1984
    Oldsmobile Omega

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1981
    Oldsmobile Omega

    4 Cylinder 2.5 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1981
    Oldsmobile Omega

    6 Cylinder 2.8 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1980-1983
    Peugeot 504

    4 Cylinder 2.3 Liter
    • Cutting and Welding Required During Installation
    1986
    Peugeot 505

    4 Cylinder 2.0 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1989-1995
    Plymouth Acclaim

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1980
    Plymouth Arrow

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1986-1988
    Plymouth Caravelle

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1988
    Plymouth Caravelle

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Plymouth Caravelle

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1982-1983
    Plymouth Gran Fury

    6 Cylinder 3.7 Liter
    • Cutting and Welding Required During Installation
    1983-1990
    Plymouth Horizon

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1984-1986
    Plymouth Horizon

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1983
    Plymouth Horizon

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    Plymouth Horizon

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1983
    Plymouth Horizon

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    Plymouth Horizon

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1981-1983
    Plymouth Horizon

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Plymouth Horizon

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1980
    Plymouth Horizon

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1986-1989
    Plymouth Reliant

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1983-1989
    Plymouth Reliant

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1981-1982
    Plymouth Reliant

    4 Cylinder 2.2 Liter
    • with Single Converter
    • Cutting and Welding Required During Installation
    1981-1982
    Plymouth Reliant

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1983
    Plymouth Scamp

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1988-1989, 1991-1992, 1994
    Plymouth Sundance

    4 Cylinder 2.5 Liter
    • Cutting and Welding Required During Installation
    1987-1989, 1991-1994
    Plymouth Sundance

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1990, 1993
    Plymouth Sundance

    4 Cylinder 2.2 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1990, 1993
    Plymouth Sundance

    4 Cylinder 2.5 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1990
    Plymouth Sundance

    4 Cylinder 2.5 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1984-1985
    Plymouth Turismo

    4 Cylinder 1.6 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1984-1987
    Plymouth Voyager

    4 Cylinder 2.2 Liter
    • Cutting and Welding Required During Installation
    1982-1986
    Pontiac 6000

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1983
    Pontiac 6000

    4 Cylinder 2.5 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1983
    Pontiac 6000

    6 Cylinder 2.8 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1981-1987
    Pontiac Acadian

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1982
    Pontiac Firebird

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1988-1989
    Pontiac Firefly

    3 Cylinder 1.0 Liter
    • Cutting and Welding Required During Installation
    1989
    Pontiac Optima

    4 Cylinder 2.0 Liter
    • Cutting and Welding Required During Installation
    1982-1984
    Pontiac Phoenix

    6 Cylinder 2.8 Liter
    • Cutting and Welding Required During Installation
    1983
    Pontiac Phoenix

    4 Cylinder 2.5 Liter
    • without Air Tube
    • Cutting and Welding Required During Installation
    1983
    Pontiac Phoenix

    6 Cylinder 2.8 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1981-1987
    Pontiac T1000

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1983
    Toyota Corolla

    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1985-1987
    Toyota Corolla
    DLX
    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1987
    Toyota Corolla
    FX
    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1988
    Toyota Corolla
    FX16 GTS
    4 Cylinder 1.6 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1988
    Toyota Corolla
    GTS
    4 Cylinder 1.6 Liter
    • Air Tube
    • Cutting and Welding Required During Installation
    1985-1987
    Toyota Corolla
    LE
    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1985-1986
    Toyota Corolla
    LE Limited
    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1984-1987
    Toyota Corolla
    Sport DLX
    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1984-1987
    Toyota Corolla
    Sport SR5
    4 Cylinder 1.6 Liter
    • Cutting and Welding Required During Installation
    1983-1990
    Toyota Tercel

    4 Cylinder 1.5 Liter
    • Cutting and Welding Required During Installation
    1982-1984
    Volkswagen Rabbit

    4 Cylinder 1.7 Liter
    • Cutting and Welding Required During Installation
    1986-1989
    Yugo GV

    4 Cylinder 1.1 Liter
    • Cutting and Welding Required During Installation
    1988-1989
    Yugo GVL

    4 Cylinder 1.1 Liter
    • Cutting and Welding Required During Installation
    1988
    Yugo GVS

    4 Cylinder 1.1 Liter
    • Cutting and Welding Required During Installation
    1988-1989
    Yugo GVX

    4 Cylinder 1.3 Liter
    • Cutting and Welding Required During Installation

    Who is MagnaFlow?

    MagnaFlow is an aftermarket exhaust manufacturer established in 1981. They have been doing what Vivid Racing considers to be one of the best performance exhaust systems available in the market today. The company has been in business for over 35 years and has supplied numerous kits to different enthusiasts all around the world.

    Three is Key

    MagnaFlow has been known for three things, Quality, Power, and Sound. All their products are made having these three things in mind. It has to satisfy all of these before they even let their customers have it. This is why MagnaFlow products have been widely accepted by a variety of car enthusiasts. Their eagerness to provide quality products that create power and a distinct sound has made the company a success.

    QUALITY

    As a market leader, MagnaFlow uses premium components and the latest technology to achieve the highest levels of performance and endurance. The company offers a wide range of aftermarket products. From direct-fit catalytic converters and full performance stainless steel exhaust systems to universal mufflers and kits which can be used to fabricate an exhaust for nearly any application. As an ISO-9001 certified company, they stand behind its quality, durability, and performance with a lifetime warranty.

    POWER

    For nearly 40 years, MagnaFlow exhausts have had a reputation for power among automotive enthusiasts. With a dedicated research & development department, the latest technology is always right around the corner. Every new part passes a strict performance and quality check using in-ground dynamometers, multiple flow benches, and advanced sound testing equipment. If a product doesn't meet a specific power output range, then it doesn't make the cut.

    SOUND

    MagnaFlow is committed to providing exhaust systems and parts that bring out your ride's true voice. Their secret? An ultra-efficient straight-through design with a perforated stainless steel core, mesh wrap, and acoustical fiber fill. From the way the company designs to how they pack the fill, these classic aftermarket add ons produce that deep, smooth tone you love every time.

    Advanced Manufacturing Technology

    The company utilizes the industry's most advanced manufacturing pieces of machinery and designing software technology to create a superior product compared to others. The company offers a wide range of products from bolt-on kits that would fit a specific vehicle like an OEM part, a universal muffler that can be used to any application, or a custom made kit for those who are a bit more serious when it comes to performance.

    We have the MagnaFlow performance exhaust systems and parts for nearly any type of vehicle and configuration.

    MagnaFlow Exhaust Systems

    • American Muscle Exhaust Systems
    • Truck Exhaust Systems
    • SUV Exhaust Systems
    • UTV Exhaust Systems

    MagnaFlow Configurations

    • Cat-Back Exhaust Systems
    • Axle-Back Exhaust Systems
    • Crossmember-Back Exhaust Systems
    • Turbo-Back Exhaust Systems

    MagnaFlow Mufflers

    • Popular Performance Mufflers
    • Straight-Through Mufflers
    • Glasspack Mufflers
    • Universal Mufflers
    • Mufflers With Tips

    MagnaFlow is EPA Compliant and Practices Sustainability

    As a national leader in aftermarket catalytic converters, MagnaFlow depends on three precious metals to build their products: Platinum, Palladium, and Rhodium. The company helps maintain precious resources by extracting them from old converters to go back into the supply chain. MagnaFlow has started a program to pass on a portion of the value of the precious metals to customers in the form of a MagnaFlow Visa® Prepaid Card. After you install your new replacement part, you can ship them your old OEM part at no cost.

    Find MagnaFlow at Vivid Racing

    If you are in search of an exhaust system that does not only make your car sound good but makes it go faster as well, then MagnaFlow is the brand for you. With a complete line of products to choose from, they would definitely have the right exhaust for your specific needs.

    Vivid Racing is proud to offer premium aftermarket parts and builds from some of the biggest names in the business. From the power and performance of MagnaFlow exhausts to the style and advanced technology of our aftermarket headlight collection, we've got your ride covered from bumper to bumper. If you can't find a specific part you need or you have questions, please contact our expert sales team at (480) 966-3040.

    PERFORMANCE EXHAUST PRODUCTS WARRANTY
    The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.

    This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.

    The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.

    No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.

    This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
    • Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
    • Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
    • Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
    • Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
    • Aluminized Systems: 1 Year Limited Warranty
    • Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
    CATALYTIC CONVERTERS WARRANTIES
    Original Warranty Certificate and Installation Statement:
    To be completely filled out by installer and returned to manufacturer. Include dealer name, complete address and phone number. Include customer name, complete address and phone number. Vehicle make, year, model, engine size, mileage and date must be filled out. The part number installed must be filled out. The Installation Statement must be completed by installer, stating the reason for replacement. Vehicle owner and installer must sign and date the Warranty Certificate /Installation Statement.

    Catalytic Converter Warranty Statement Installer's Copy:
    To be retained by Installer with copy of the invoice for six (6) months.

    Customer's Copy:
    To be retained by the vehicle owner.

    Catalytic Converters are emission control devices which are designed to last the life of the vehicle and do not normally require replacement. Furthermore, if the vehicle is properly used and maintained, original converters are covered by the emission control warranty for 8 years or 80,000 miles. Federal law prohibits repair businesses from replacing these devices except under certain limited circumstances. In order to verify that proper circumstances exist, the owner of the vehicle on which such repairs are made and a facility representative must sign the required statements on the warranty card. To avoid failing a warranty audit, please follow the instructions to ensure the new cards are filled out correctly and distributed accordingly.

    MOTORCYCLE PRODUCTS WARRANTY
    MagnaFlow motorcycle exhaust products, including Arlen Ness by MagnaFlow exhaust systems, are warranted against defects in material and/or assembly workmanship only for a period of 1 year from invoice date. This Warranty is void if the Product is not installed properly on the vehicle for which it is designed. This Warranty does not apply to any Product which has been installed on any commercial or racing vehicle or which has been improperly installed, modified, altered or subjected to misuse or damage from accidents; including excessive heat. Also, cost of labor and any additional parts or components required to complete installation of a replacement Product are not covered by this Warranty; including coatings, paints and/or finishes, flaws or rust. MagnaFlow including Arlen Ness by MagnaFlow exhaust systems are designed to fit and operate on original OEM motors and chassis with no modifications of any type on the motorcycle.

    Proof of purchase from an authorized retailer must accompany any warranty claim. The original Product that is deemed to be under warranty may only be returned and/or exchanged for a Product of the same part number. No other warranty, expressed or implied (including merchantability), applies to the Products, nor is any person including the manufacturer authorized to assume any other warranty. Dealers and distributors are not authorized to make warranty judgments or claims regarding MagnaFlow products. The manufacturer does not assume any responsibility for any consequential damages occasioned by the Product, or inconvenience or interruption in any operation, service or shipping. All approved warranty returns must be accompanied by a return authorization number. Parts returned to MagnaFlow without a return authorization and accompanying documentation may be refused. No parts will be accepted with freight due.

    This warranty gives you specific legal rights. You may also have other rights which may vary from State to State. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

    The warranties set forth herein are exclusive and, unless otherwise required by applicable law, no other warranties are made by MagnaFlow or are authorized to be made with respect to the Product.

    Vendor Media File

    Click to Download here

    Vendor Media File

    Click to Download here

    Check out these other great products