Volk Wheel Sets In Stock Ready To Ship
  See more parts for your KTM 250 SX

Moto Tassinari VForce Replacement Reed Gasket KTM 2017-2019

$6.50

Moto Tassinari

Model #G306

Hurry Low Stock


Shopper Award

Original replacement gaskets for the VForce reed valve system by Moto Tassinari.

Each time you inspect your reeds for wear (which you should be doing twice a season) you should always replace the gaskets to make sure the seal has not and will not be compromised. Always replacing gaskets is cheap insurance against air leaks which can ultimately lead to severe motor problems such as sucking dirt or an extremely lean condition.

Fitment:

  • KTM 250 SX-F Factory Edition 2017-2018
  • KTM 250 SX-F 2018-2019
  • KTM 250 SX 2018-2019
  • KTM 350 SX-F 2018-2019
  • KTM 250 XC 2018-2019
  • KTM 250 XC-F 2018-2019
  • KTM 300 XC 2018-2019
  • KTM 350 XC-F 2018-2019
  • KTM 250 XC-W 2018
  • KTM 250 XC-W TPi 2018-2019
  • KTM 300 XC-W 2018
  • KTM 350 EXC-F 2018-2019
  • KTM 300 XC-W TPi 2019
Notes: All gaskets are sold individually so, if you require two, please make sure to add two to your cart.

Other Part Numbers:
Moto Tassinari #59-6848

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

https://www.P65Warnings.ca.gov

Vehicle Engine Notes
2017-2019
KTM 250 SX

2018-2019
KTM 250 SX-F

2018-2019
KTM 250 XC

2018-2019
KTM 250 XC-F

2018-2019
KTM 250 XC-W

2018-2019
KTM 300 XC

2018-2019
KTM 300 XC-W

2018-2019
KTM 350 EXC-F

2018-2019
KTM 350 SX-F

2018-2019
KTM 350 XC-F

ABOUT MOTO TASSINARI

Moto Tassinari manufactures the AIR4ORCE adjustable intake system for four-stroke bikes and the VForce reed valve system for two-stroke motorcycles in the United States.

WHAT ARE THE BENEFITS OF VFORCE REEDS?

A VForce reed valve system increases bottom-end power while also improving mid-range and top-end performance. It also allows for increased airflow, which results in increased horsepower.

WHY CHOOSE MOTO TASSINARI'S VFORCE REED VALVE SYSTEM?

For almost a decade, Moto Tassinari's VForce reed valve system has been the reed valve system of choice for anyone serious about two-stroke engine performance. The VForce3 reed valve system is based on the simple idea that it will make the engine more powerful and the throttle more responsive by making it more efficient than a standard reed valve.

MOTO TASSINARI'S VFORCE REED VALVE SYSTEM DESIGN

The VForce reed valve system's unique design provides twice the reed tip surface of a typical reed valve. This has two significant advantages:

1) The reed petals travel approximately half the distance required by a normal reed valve design to produce the same amount of airflow.

2) Because the reed petals travel only half the distance required by a traditional reed valve design, there is a greater possibility of them being fully opened as well as a greater chance of sealing when they are "closed." A reed petal never completely "closes" in the traditional sense, because it moves all the time and never stops.

The VForce3 also has a completely screw-free design, which means there are no loose screws, or worse, screws that go through your engine and cause damage. Because screws aren't used, reed petal changes can be done very quickly.

VIVID RACING- MOTO TASSINARI

Vivid Racing includes a wide collection of Moto Tassinari products such as the VForce3R Reed Valve System, VForce2R Replacement Reed Petals, System Arctic Cat, VForce4R Replacement Reed Petals, and Reed Gasket for different models of motorbikes.

Check out these other great products