.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Honda Civic
Select the year of your Honda Civic:
If you're looking to boost your 1.5L Turbo Civic's performance, let me tell you about the Cobra Cold Air Intake System. It's hands-down my top pick for this platform. But if you're not keen on going the cold air route, the Short Ram Intake System is a solid alternative that won't let you down.
One of the standout features of this intake is the CNC machined billet aluminum MAF housing. It’s designed to keep your fuel trims right where they should be—within 4% of factory short-term and long-term fuel trims. This means you can enjoy a smooth driving experience without any hiccups. The system comes equipped with a 4-inch air filter, which is crucial for letting your engine breathe better.
Now, you’ve got two options for MAF housing: the Standard Bore and the Big Bore. Both work with your factory MAF sensor, but they differ in diameter and performance. The Standard Bore is great if you want to keep things simple; it provides factory-spec fuel trims without needing any tuning. On the flip side, the Big Bore allows for a whopping 50% more air flow compared to the Standard. That’s where the fun begins, but it does require a tune to really unleash its potential. This increased airflow means less pumping loss and a more direct path for cooler air to reach your engine.
What’s really neat is that you don’t have to commit to just one MAF housing. With our MAF Housing Conversion Kit, you can easily switch between them without needing a whole new intake system. Plus, if you decide to go for the Cold Air Intake later, we have a conversion kit for that too.
Performance Gains:- With the Standard Bore MAF housing, you can expect around 15 horsepower and 12 ft/lb of torque over stock—no tune needed.
- Step it up with the Big Bore MAF housing, and you could see gains of about 20 horsepower and 15 ft/lb of torque, especially with a basemap calibration on Hondata or KTuner.
- And if you’re really pushing your Civic’s limits with custom tuning, even bigger gains are on the table.
- Designed for the Honda Civic Si 1.5L Turbo from 2017 to 2021.
- This intake fits most variants, including the 6MT, CVT, RHD, and even international models.
- Keep in mind, short ram intakes can be sensitive to heat-soak on this chassis, which is why I usually lean towards the CAI for better performance.
- No ECU calibration is needed for the Standard Bore MAF Housing, which is a nice bonus.
- Compatible with Two Step Performance TSP & Phearable Calibrations if you select the Race MAF option.
In short, if you want to give your 2017-2021 Honda Civic a performance boost, the PRL Motorsports Standard Bore MAF Housing Short Ram Air Intake System is worth checking out. It’s a well-thought-out piece of engineering that delivers real results.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2017-2021 Honda Civic |
Civic | 2017-2021 |
PRL Motorsport is a company established in 2007. Their goal is to provide quality aftermarket parts for enthusiasts who are into speed. The company is composed of a team that has fabricating experience going back to the 90s and early 2000s. Today, the company has created quite a reputation in building fast vehicles specializing in Japanese import platforms such as Honda, Nissan, and Mitsubishi.
Creating Parts to Make Your Cars FasterThe company focuses on parts that would make the vehicle fast. They turn the usual grocery getter to something that could be at par or even outperform some high performance built cars. They offer a variety of components such as turbochargers, intake systems, intercoolers, exhaust parts, throttle bodies, intake manifolds, and other upgrade parts.
High Tech MachineriesWith the advancement in technology, designing parts today has become more precise and accurate. PRL has taken advantage of this and uses 3D CAD Design and CNC machines to create products that are a perfect fit. Their motto for creating innovative designs has helped them create pieces that are different compared to the traditional design.
Purchase PRL Products at Vivid RacingIt is built by racers for racers. This is how we could describe PRL. They have been making parts for years and is always on the edge in pushing the boundaries when it comes to designing their products. If they could get 1 hp by just slightly changing the design, PRL would definitely do it.
If you are the kind of enthusiast who wants to go faster, then PRL is the brand for you. Visit Vivid Racing and check out the list of PRL products that would fit your specific requirements.
PRL Motorsports branded products (excludes other manufacturers' components that may be part of a product's assembly such as a turbocharger or blow-off valve) are warranted to the original owner against manufacturing defects in materials and craftsmanship for the lifetime of the product.
If a PRL Motorsports branded product is covered by this warranty fails due to a manufacturing defect we will repair or replace the product, without charge, at our discretion. Only original, unaltered and unmodified materials and workmanship are covered by this policy. This warranty does NOT cover inconsistencies due to the manufacturing process, damage caused by accident, improper care/installation, negligence, normal wear-and-tear, or the natural breakdown of colors and/or materials over extended time and use. Damage not covered under warranty may be considered for repair for a reasonable rate or a reduced price for a replacement piece (a fee will be charged for return shipping).
Please note all PRL Motorsports products are designed for off road use only. It is up to the user and/or installer to determine fitness for any other application. Manufacturer can't control the severity of off road terrain, your driving habits, quality of your installation and offers no warranty as to fitness or performance for a particular application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. All PRL Motorsports products carry a Limited Lifetime Warranty. however only products that have abnormal defects or workmanship can be returned. Parts that have been abused, incorrectly installed, modified, or damaged cannot be returned. Please contact us before returning any parts. No claims will be accepted on parts that have been modified in any way. Warranty is limited to replacement or repair of defective parts only and does not cover labor or shipping costs, vehicle down time or any other losses on your behalf.
The PRL Motorsports Limited Lifetime Warranty covers manufacturing defects in materials and workmanship, regardless of the age of product, but it does NOT cover normal wear and tear. Wear and tear is damage that naturally and inevitably occurs as a result of normal use. Regardless of how carefully you use or how well you care for your PRL Motorsports product, it will eventually begin to show age and wear. Common examples of wear and tear that would not be covered under the Limited Lifetime Warranty include abrasions, scratches, color changing from heat in exhaust components and so on. Less common examples include flex-section wear over an extended period of time.
If a PRL Motorsports branded product is covered by this warranty fails due to a manufacturing defect we will repair or replace the product, without charge, at our discretion. Only original, unaltered and unmodified materials and workmanship are covered by this policy. This warranty does NOT cover inconsistencies due to the manufacturing process, damage caused by accident, improper care/installation, negligence, normal wear-and-tear, or the natural breakdown of colors and/or materials over extended time and use. Damage not covered under warranty may be considered for repair for a reasonable rate or a reduced price for a replacement piece (a fee will be charged for return shipping).
Please note all PRL Motorsports products are designed for off road use only. It is up to the user and/or installer to determine fitness for any other application. Manufacturer can't control the severity of off road terrain, your driving habits, quality of your installation and offers no warranty as to fitness or performance for a particular application. Many of our products require fabrication skills to install and should only be installed by a qualified fabricator or mechanic. All PRL Motorsports products carry a Limited Lifetime Warranty. however only products that have abnormal defects or workmanship can be returned. Parts that have been abused, incorrectly installed, modified, or damaged cannot be returned. Please contact us before returning any parts. No claims will be accepted on parts that have been modified in any way. Warranty is limited to replacement or repair of defective parts only and does not cover labor or shipping costs, vehicle down time or any other losses on your behalf.
The PRL Motorsports Limited Lifetime Warranty covers manufacturing defects in materials and workmanship, regardless of the age of product, but it does NOT cover normal wear and tear. Wear and tear is damage that naturally and inevitably occurs as a result of normal use. Regardless of how carefully you use or how well you care for your PRL Motorsports product, it will eventually begin to show age and wear. Common examples of wear and tear that would not be covered under the Limited Lifetime Warranty include abrasions, scratches, color changing from heat in exhaust components and so on. Less common examples include flex-section wear over an extended period of time.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.