See more parts for your Nissan GTR

WP Pro Front 400x34mm 2pc Brake Rotor Upgrade Round Nissan GT-R R35 12-20

$1,600.00 Sale:$1,200.00

WP Pro

Model #WP-R35-RTR-F

Help me decide

Shopper Award

The WP Pro front brake rotor kit can greatly improve your stopping performance on the Nissan GT-R R35.  Weighing in at 4000lbs, the GT-R is very hard on brakes with most drivers cracking the discs even from hard street driving.  Upgraded brake rotors should help dissipate heat more efficiently, provide better braking balance, and increase the longevity of your brake rotors.  From the factory, the 2008-2011 GT-R came with 380x34mm rotors while the 2012+ was equipped with 390x32.8mm rotors in the front.  The WP Pro front brake rotor upgrade increases your rotor size to 400x34mm (15.8 inches). With the WP Pro brake rotor upgrade on your Nissan GT-R R35, you have a much improved braking setup for the street and track requirements.

To use the larger diameter rotor, WP Pro supplies a caliper spacer that is designed for either the 2008-2011 models or the 2012+ GT-R’s.  The rotors feature a machined aluminum hat with 2 piece hardware.  The rotor hats are hard anodized to prevent any scratching or wearing from taking wheels on and off.  Each rotor has been heat treated for 24 hours at temperatures of up to 800 degrees Celsius (1472F).  One of the biggest advantages of doing a brake upgrade is the rotational weight savings. From the factory, the stock 2 piece 390mm rotors weighed in at 25.5lbs per corner.  The WP Pro front rotors weigh only 23.4 lbs. which saves you 2.1 lbs. per corner over the stock 2012+ 390mm rotors.  The rotational weight savings is like taking 6.3 lbs. of dead weight off each corner! 

With more effective curved vanes in a V shape, these further help dissipate heat away from the rotors.  This design improves cooling by pushing cool air from the center of the wheel to where the rotor needs it most.  For those that want a standard round rotor, these are available as well.  Each kit has been manufactured to achieve WP Pro's high quality standards that come from years of rigorous testing.  The kit is sold as a complete front axle setup with rotors, hardware, and hats.  Replacement brake discs can be purchased separately when necessary as the brake hat is not a consumable item.


  • Pair of 2-Piece 400x34 Round Rotors assembled with hardware and aluminum hats
  • Front caliper spacers for your selected year to use the larger 400mm diameter


  • Anodized rotor hats
  • Full floating assemblies with stainless steel M8 bolts vs standard M6 hardware
  • Directional vented, heat treated, and coated rotors 


  • Nissan GT-R 2008+
  • Nissan GT-R SpecV 2008+
  • Nissan GT-R Black Edition 2012+
  • Nissan GT-R Nismo 15-16


  • Does NOT fit Nissan GT-R Nismo 17-20+.  The Nismo wheel studs are 14x1.5mm where the standard GTR are 12x1.25.  To get these to work you would have to open up the wheel stud holes.

Proposition 65

/!\ warningWARNING: Cancer and Reproductive Harm

Vehicle Engine Notes
Nissan GTR

Check out these other great products